-
Your Customer does not know how to write UAT documents How will you Handle this situation?
kurtz182
- Dec 24th, 2009
Requirements are open to interpretation and the purpose of a User Acceptance Test is to verify that the product meets requirements as they are interpreted by the client. Consequently, ...
rajmohan23
- Sep 5th, 2009
Hithe tester is more responsible for giving the quality product.if the c dont know we have to help and test the uat n explain them
-
At what stage the unit testing has to be done?
kurtz182
- Dec 24th, 2009
The answer to this question depends on the software development model being used. In the V-model, unit test comes after the Detailed Design stage.
mathan_vel
- Sep 25th, 2009
After Detailed Design in V-Model. Unit Test Plan is prepared. once the coding is done for seperated functionalties unit testing is conducted according to the Test Paln
-
What are the key factors tester keep in mind before writing test case. Please give examples of any particular test case.
kurtz182
- Dec 24th, 2009
Key factors to consider before authoring test cases are:1) Test cases must cover all of the product's requirements.2) Test cases should be written for greatest value with least effort.3) Testing t...
mathan_vel
- Sep 9th, 2009
1. Test Case should cover the functionality2. Clearly mentioned about the expected result for the Test Data.3. Test Case should be understandable one, which may be executed by other resource.4. Test S...
-
Is the Static testing a functional testing?
kurtz182
- Dec 20th, 2009
Static testing is a form of software testing that takes place before the software is compiled and run. In dynamic testing the software must be compiled and run. Static testing ge...
kalyan M..
- Mar 1st, 2007
Static Testing is a form of software testing where the software isn't actually used. Syntax checking and manually reading the code to find errors are methods of static testing. This type of testin...
-
What is the final Stage of Integration Testing?
kurtz182
- Dec 20th, 2009
The final stage of integration testing is to combine all software components (or modules) into an organized meaningful whole and perform system testing to verify all pieces work properly in concert with one another.
kiran
- Feb 6th, 2007
Hi,
After integration testing we will do system testing. Here the question is final stage of integration testing right so you should test all the units. As jainbrijesh says it depends on the application & tester approch -
What is Defect Density and how can we calculate Defect Density ?
kurtz182
- Dec 20th, 2009
Defect density is a metric used to make informed decisions about software quality. Defect density = # of defects / unit or component sizeThe size is measured in:> Software lines of code (SLOC...
mathan_vel
- Sep 9th, 2009
Defect density is a measure of the total known defects divided by the size of the software entity being measured. Number of Known Defects--------------------------------- ...
-
What are the difference between sanity and smoke testing.
mithr17
- Nov 1st, 2011
Smoke test is done on all patch builds, normal application builds but not regression builds.
Sanity testing is similar to smoke test in that sanity test are run on regression builds.kurtz182
- Dec 20th, 2009
The difference between a smoke and sanity testing is:Smoke test verifies whether all components of the software are available and acceptible for testing when the software is first released to the test...
-
What do u mean by Masked Defect
kurtz182
- Dec 15th, 2009
Masked defect: When one defect prevents the detection of another defect, the undetected defect is called the masked defect.EXAMPLEBlocking defect: A particular text box doesn't validat...
shashi
- Jul 28th, 2006
Can anybody give an example to masked defect, please
-
Test 5 Screens of an Application
What type of testing you can do? When we gave you 5 screens and, how can you test that application?
kurtz182
- Dec 12th, 2009
I would provide a list of functionality and GUI tests, but there are simply far too many unknowns to adequately answer this question. For example (not an exhaustive list):Q1: In what context am ...
rajmohan23
- Sep 5th, 2009
Based on the requirement I will select the testing. For the beginning I will do the exploratory testing to know the functionality. Then I will check whether it is accepted for the links...
-
How do you determine What is to be tested?
kurtz182
- Dec 4th, 2009
You determine what is to be tested by studying and understanding the software's business requirements and its specifications. If you have work-flow diagrams and/or wireframes, then use these as well. These documents define what is to be tested.
-
How to develop a test plan ? How to develop a test case?
Test plan consists of test cases. Test cases you develop according to requirement and design documents of the unit, system etc. You may be asked what would you do if you are not provided with requirements documents. Then, you start creating your test cases based on functionality of the system. You should mention that this is a bad practice since there is no way to compare that what you got is what...
kurtz182
- Dec 3rd, 2009
TEST CASESThe method to develop a test plan has been submitted in another answer.The process used to create test cases are:1) Read and understand all supporting documents and incorporate this kn...
kurtz182
- Dec 3rd, 2009
TEST PLANI will describe the means to develop test cases in another answer. To create a test plan, one must:1) Read and understand all supporting documents and incorporate this knowledge int...
-
What are the risks involved in testing?
kurtz182
- Dec 3rd, 2009
A test team faces these potential risks:1) Lack of support from upper management2) Company-wide lack of adherence to quality standards (ex: test entry and exit criteria)3) No documentation; inaccurate...
preethi.gollamandala
- Aug 11th, 2009
Following are the risks involved in the testing phase 1)Lack of Documentation 2)Lack of understanding functionality of the module3)Lack of communication between testers and devlopers 4)Lack of time 5)Lack of resources 6)lack of proper testing environment
-
What is Test Automation?
kurtz182
- Dec 3rd, 2009
Test Automation is the use software to execute tests rather than executing them manually. Test Automation sets up the preconditions, executes the test, compares the actual outcomes to expec...
preethi.gollamandala
- Aug 11th, 2009
Conducting testing process with the help of automation testing tools is known as Test Automation i.e excution of test cases on the software build
-
Wat is smoke testing
kurtz182
- Dec 3rd, 2009
When a build is released to test, the very first thing a tester does is run a 'smoke test' to ensure the software is in a suitable state for testing. A smoke test is superficial software testing...
preethi.gollamandala
- Aug 11th, 2009
Smoke Test: When a build is received, a smoke test is run to ascertain if the build is stable and it can be considered for further testing. smoke testing can be done for testing the stability of any interim build. Smoke testing can be executed for platform qualification tests.
-
What is the difference between usability testing & user acceptance testing?
kurtz182
- Dec 3rd, 2009
Usability Testing is testing performed by potential end-users to gain feedback about the ease with which they can learn and use the application. It is typically done before software development ...
akbarali
- Oct 5th, 2007
Usability Testing - is to test the user-friendliness of the software.Easy to use, look , speed in interface.User Acceptance Testing - is to gather feedback from customer before releasing the software to the customer.Alpha and Beta testing are subtests in UAT.
-
In a Test Plan, the Features to be Tested and the Features not to be tested are generally included, is there any rationale behind why this should be or should not be included in a Test Plan?
kurtz182
- Dec 3rd, 2009
The 'Features to be Tested' and the 'Feature not to be tested' are included in the Test Plan for the following reasons:PRIMARY REASONA Test Plan is typically reviewed by all relevant s...
Bhargavi
- Jan 25th, 2007
Every release will have a Scope. There will be some areas which will not be covered in the present build. So it is mentioned in the Test Plan that test cases which will cover those areas will not be tested. This will ease the test case preparation and avoid unnecessary work
-
Testing Life Cycle and Software Development Life Cycle
What is the difference between Testing Life Cycle and Software Development Life Cycle?
deven_a76
- Apr 26th, 2009
SDLC includes various phase of the development where it also includes the Testing Life cycle as part of it. Testing Life cycle concentrate only on the testing phase of the system.
-
Informal Test Strategy
The test strategy that is informal and non structured is known as _______________
kurtz182
- Dec 2nd, 2009
Informal non-structured testing is called 'ad-hoc testing' or 'exploratory testing'.
-
How would you test a mug (chair/table/gas station etc.)?
First of all you must demand requirements and functional specification and design document of the mug. There will find requirements like ability to hold hot water, waterproof, stability, break ability and so on. Then you should test the mug according to all documents.
kurtz182
- Dec 2nd, 2009
If you are in an organization that delivers requirements and specifications, then1) Learn as much about the product from requirements, specifications, and marketing branding documents (if applicable)....
alecia
- Oct 29th, 2008
First of all you will need to collect the requirements of the mug, the rules as to how the mug shud respond to different input, like hot water, boilng water or cold water. Its expected effect on...
-
What is considered a successful test?
A test that discovered more errors. The whole purpose of testing process is to discover as many bugs and errors as possible. Test that covers more functionality and discovers more errors in your software product, therefore considered more successful.
kurtz182
- Dec 2nd, 2009
As it applies to software testing, a successful test is one that accurately and completely informs about the state of a relevant functionality in a software application.
rajni saini
- Sep 3rd, 2008
A successful test provides following goals:1) Detect maximum bugs 2) Deliver the s/w or system meeting all the specified requirements3) User satisfaction4) Quality s/w delivery 5) Risk related to s...
Testing Basics Interview Questions
Ans