sireesha

• Feb 18th, 2014

Difference Between Functional Testing and Regreesion testing?

Chandra Patturu

 Profile Answers by Chandra Patturu Questions by Chandra Patturu

• Oct 11th, 2012

Integration testing in order to form all developed indusial modules into single module or system to verify interface between those components are integrated correctly or not is called as integration t...

Answer Question  Select Best Answer

lakshmi chowdary

• Dec 12th, 2012

In Adhoc testing is randomly testing, in this tester will decide expected result directly from requirements.
Adhoc testing is doing without testcases.
Difference between Adhoc testing is doing with experience
and exploratory testing is doing without knowledge.

HelenWheels

 Profile Answers by HelenWheels Questions by HelenWheels

• Oct 21st, 2008

It is the practice of running tests outside of documented test scenarios and test cases. Ad hoc testing is usually performed when a perceived defect is discovered or suspected and there are no documented test cases that would test that possible defect.

Answer Question  Select Best Answer

Explain Physical Configuration Audit (PCA) and Functional Configuration Audit (FCA)

Hari

• Nov 8th, 2012

@mnsp

Can u give few examples on PCA and FCA findings with some work products (PMP, RMP, Builds, Test cases)?

mnsp

• Jan 4th, 2012

Starting from configuration audits, then getting into physical and functional configuration audits. Primarily purpose of Configuration audit is to verify the "status" of the configuration items that...

Answer Question  Select Best Answer

A formal testing technique where source code is traced by a group with a small set of test cases, while the state of program variables is manually monitored, to analyze the programmer's logic and assumptions.

tarun kuamr

• Oct 29th, 2012

Code walk through is an informal code analysis technique. In this technique, after a module has been coded, successfully compiled and all syntax errors eliminated.

Sujatars

 Profile Answers by Sujatars Questions by Sujatars

• Mar 21st, 2007

An analysis of the program source code to find defects & verify coding techniques

Answer Question  Select Best Answer

What is meant by Risk / Contingency / Mitigation in test Plan?

rohit kumar

• Aug 22nd, 2012

1.) Going with max speed say 100Km/hr on bike on Indian road is always RISK
2.) Cut down the speed to 20 to 30 Km/hr, we can say to mitigate the risk or mitigation plan
3.) No options to cut down the speed less then 100Km/hr, but with proper safety precautions we could say Contingency plan.

Mani

• Sep 3rd, 2011

I'll share my view.

Risk: its simply chances/probability of getting loss.

Mitigation: Lessen the Severity/minimization of potential impact

Contigency: A chance, accident, or possibility conditional on something uncertain:Eg. He was prepared for every contingency

Answer Question  Select Best Answer

What Methodology are you using in your company?

Manivannan

• Jul 16th, 2012

We are using the "V" model.

Answer Question  Select Best Answer

ER_VEN

 Profile Answers by ER_VEN Questions by ER_VEN

• May 20th, 2012

Agile is a methodology of development/testing. Let us take and classic example of Yahoo Mail, which everyone might have used. 1. The entire project would be decided to be completed on a specific tim...

Dillip Palai

• Apr 25th, 2012

Agile testing is a software testing practice that follows the principles of agile software development. Agile testing does not emphasize testing procedures and focuses on ongoing testing against newly...

Answer Question  Select Best Answer

What is meant by Static Testing and Dynamic testing?, i want to know more information about this. If any body knows Ans for this Question Plz send me as early as possible.?

Dillip Palai

• May 1st, 2012

STATIC TESTING: This type of testing is done during Verification process. It does not need computer, testing of a program is done without executing the program. ex:Reviewing, walk through.. DYNAMI...

Mohan R.C

• Jan 10th, 2012

Static testing: It is one of the type of testing, it is used to find the faults before execution, it save money, time etc..

Dynamic testing: After the static testing it take place, it is used to found failure or causes of bugs.

Answer Question  Select Best Answer

alexintime

• Apr 3rd, 2012

Blue box testing is what Microsoft calls their in-house testing...

Kumar Surapaneni

• Feb 15th, 2007

ya that is true there is no such type of testing . instead of Black u type it as Blue Box testing .

Answer Question  Select Best Answer

Dillip Palai

• Mar 22nd, 2012

Requirements tracing is the process of documenting the links between the user requirements for the system you're building and the work products developed to implement and verify those requirements. Th...

Samrat Biswal

• Feb 23rd, 2012

RTM: Requirement Traceability Matrix is a deliverable document to client which shows the mapping of Test cases/Conditions to requirement.It shows the confirmation to client that test team has covered all the requirement provided by client.

Answer Question  Select Best Answer

Checks for memory leaks or other problems that may occur with prolonged execution.

Dillip Palai

• Mar 19th, 2012

There are 4 types of performance testing: 1. Load: Determines response times of critical business processes and transactions to determine whether they are within documented expectations 2. Volume: ...

mfsi_chinmayb

 Profile Answers by mfsi_chinmayb Questions by mfsi_chinmayb

• Mar 8th, 2012

Endurance testing is otherwise known as Soak testing.Endurance testing is the stability check for the application . It is a test done to analyze the performance of a application whane put under a certain enviroment for a threshold duration .

Answer Question  Select Best Answer

mfsi_chinmayb

 Profile Answers by mfsi_chinmayb Questions by mfsi_chinmayb

• Feb 28th, 2012

Test data is simply the data which is affected or affects
the system or component.Hence we need to filter out the test data to forbid the term exhaustive testing.So we can
implement different test techniques like Equivalent
partitioning or boundary value analysis etc

msudhanreddy

 Profile Answers by msudhanreddy Questions by msudhanreddy

• Dec 5th, 2006

Test Data:---------Inputs: Client Document and Application OutpUts: Process flow And Checking Process.This Data is collected from functional process flow .thi is provided by businesh analyest he said ...

Answer Question  Select Best Answer

What is Configuration Management?

alok naik

• Aug 19th, 2011

Determines the effect of adding or modifying resources like CPU,Memory,Network Card, Disk driver is known as configuration management

Answer Question  Select Best Answer

Meenachidevi

• Aug 4th, 2011

COTS (Commercial Off -the-Shelf) describes software or hardware products that are ready-made and available for sale to the general public.

kokila5

 Profile Answers by kokila5 Questions by kokila5

• Mar 22nd, 2009

Commercial off-the-shelf software: Its a software product that is developed for the general market, i.e., for the large customers, and that is delivered to many customers in identical format. 

Answer Question  Select Best Answer

nikunj

• Jul 15th, 2011

System Testcases:
In this we write test cases for all the main modules of
the application.

UAT Testcases:
In this we write test cases which are understandable to any third party .

sowmyadesaraju

 Profile Answers by sowmyadesaraju Questions by sowmyadesaraju

• Jun 18th, 2007

Hey there!The main difference between UAT and System testing is that UAT is done at a client place after finishing the whole project.While System testing is 100% BlackBox testing, there is a chan...

Answer Question  Select Best Answer

Satya

• Jul 13th, 2011

By using RTM we can know the status of the project. In RTM we will list all the requirements with their corresponding test cases numbers. E.G: Requirement 1 contain 1-10 test cases Requirem...

rmsangita

 Profile Answers by rmsangita Questions by rmsangita

• Sep 25th, 2007

The Reuirement Tracebility matrix is a cross matrix that traces the requirements through each stage of the requirements gathering process. High level concepts will be matched to scope items ...

Answer Question  Select Best Answer

srisandy

 Profile Answers by srisandy Questions by srisandy

• Nov 27th, 2007

Hi,System testing is testing on different platforms and E2E is testing the whole application like the top-down approach.

Answer Question  Select Best Answer

What is CRUD Testing? What type of Testing it is?

AdriannaMH

 Profile Answers by AdriannaMH Questions by AdriannaMH

• Feb 19th, 2011

CRUD testing is actually Black Box testing. CRUD stands for Create, Read, Update and Delete.

Answer Question  Select Best Answer

divyag

 Profile Answers by divyag Questions by divyag

• Jan 9th, 2011

Test Plan:it is the responsibility of test lead to prepare the plan document which has the below detailsIntroduction,features to be tested,features not to be tested,pass/fail criteria,entry and exit c...

rekhaumesh

• Sep 29th, 2007

Test plan gives the details of entire testing process. which tells what to test, when to test, How to test and who has to test what and what areas need to be focussed and priotiry of test casewhere te...

Answer Question  Select Best Answer

divyag

 Profile Answers by divyag Questions by divyag

• Jan 9th, 2011

Integral testing means testing is conducted on multiple components.This test is conducted by integrating two or more components in the same application or two different applications are integratedFor ...

Jyothi

• Mar 16th, 2006

Integration testing  checks dataflow.Once all individual modules are tested thorougly and grouped there is a chance of getting errors at interfaces. so integration testing checks data flow from one module to next

Answer Question  Select Best Answer