-
Write Test cases for Traffic Signal
Read Best Answer
Editorial / Best Answer
sarvesh4u- Member Since Apr-2008 | May 12th, 2010
Test cases on the Traffc Signal
1- There should be three signal light (Red,Yellow,Green) also there should be provision to have a left and right arrow signal.
2- At a time only one stright and aadjacent left direction should have green signal on.
3- There should be duration of 5 second after completation of Green signal.
4- At the time of Green signal the Zebra cross signal should be red.
5- There should a provision when all the signal should be closed and only zebra crossing is allowed.
6- To make sure the visibility of the signal the height of the signal pole should be grater than 10 feet.
7- There should be provision to allow maual control if it is not a digitally controled.
8- Each and every signal should have time meter in the decreasing order.
9- There should be power backup provided to the signal.
10- The intensity of the signal light should be brighter and should not be dull.
mathan_vel
- Oct 1st, 2010
Test cases for T-Signal1. Ensure that T-signal is working fine on Power.2. Ensure that all 3 colors are glowing at frequent time.3. Ensure Red light should glow after the yellow light off.4. Ensure th...
sarvesh4u
- May 12th, 2010
Test cases on the Traffc Signal1- There should be three signal light (Red,Yellow,Green) also there should be provision to have a left and right arrow signal.2- At a time only one stright and aadjacent...
-
What are the benefits of preparing test cases?What are the benefits of test documentation?What is the process of defect reporting?
saravanan123
- Aug 20th, 2009
Answer1.while we are preparing the test cases we can know whether all the functionalities are covered properly2.The purpose of test Documentation is to know whether all the records are prepared proper...
siri212003
- Dec 7th, 2007
The main objective of test case1.to excercise a particular path in the program2.to check the compliance between the srs3. with out test case it is difficult to justify that all possible tests have been done to check some functionality .
-
Acceptance test cases
Your customer does not have experience in writing Acceptance Test cases. How will you do that in coordination with customer? What will be tested as part of Acceptance Test ?
rajmohan23
- Aug 31st, 2009
Acceptance Test Case Normally end user do not have any idea writing test cases and it is not the duty for him. That is why we (test...
saravanan123
- Aug 13th, 2009
First have the concept of Acceptance Testing : It is nothing but it is done at the time of release of the project so for that writing the test case known to customers is a wrong thing we should sit with the customers and we should undergo all the things
-
Scope for ATM Machine
How to write scope for ATM Machine
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 13th, 2009
User Interface
1) screens have proper format and text
2) buttons correspond to proper items on screens
3) keypad entries are properly displayed
4) can backspace to delete entries
5) branding
Account Information
1) debit or credit card information
2) pin code
3) transaction charge
4) deposit limit per transaction
5) deposit limit per day
6) withdrawal limit per transaction
7) withdrawal limit per day
8) account statusa) card active
b) card inactive
- expired
- replaced
- reported stolen
- suspicious activity (internal)
Insert Card
1) improper card
2) proper card
a) wrong way
b) upside down
c) correctly
3) asks for pin
a) proper pin
b) improper pin
Check Balance
1) of checking account
2) of savings account
3) another transaction
a) yes
b) no
4) get receipt
a) yes
b) no
5) transaction charge (none)
Deposit
1) to checking account
2) to savings account
3) amount
a) upper limit (+.01 and -.01)
b) lower limit (+.01 and -.01)
c) nothing
4) correct amount
a) yes
b) no
- reenter
5) another transaction
a) yes
b) no
6) get receipt
a) yes
b) no
7) transaction charge (none)
Withdrawal
1) from checking account
2) from savings account
3) amount
a) upper limit (+.01 and -.01)
b) lower limit (+.01 and -.01)
c) nothing
4) correct amount
a) yes
b) no
- reenter
5) another transaction
a) yes
b) no
6) get receipt
a) yes
b) no
7) transaction charge (amount + acct type)
Fast Cash Withdrawal
1) from checking account
2) from savings account
3) amount - 10, 20, 30, 50, 100 or 2004) correct amount
a) yes
b) no
- reenter
5) another transaction
a) yes
b) no
6) get receipt
a) yes
b) no
7) transaction charge (amount + acct type)Avdhesh
- Nov 5th, 2016
What could be some of the out of scope items?
yxl01
- Sep 5th, 2010
How do you know you've tested all the paths and scenarios you need to test?To ensure full or sufficient coverage, try Model-Based Testing (MBT) technique. The idea is to create a model (stat...
-
Test cases for check box
How to write test cases for Check boxes?Give some sample test cases.Give some sample test cases for drop down list box in a GUI.
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 13th, 2009
CHECK BOXES
1) Physical location and arrangement on page
2) Labels associated with each check box
3) Check box grouping follows requirement and makes sense
4) Initial focus and tab order
5) Active or inactive state (grayed out) per business rules
6) Can check and uncheck boxes
7) Validation when controls are required for submission
8) Corresponding data is successfully captured in database
9) Controls follow state management rules when navigating between pages
DROP DOWN LIST BOX1) Physical properties (location, height, width)
2) Corresponding label
3) Initial focus and tab order
4) Displays all items without truncations
5) Can select and submit only one item in the list at any given time
6) Validation when control is required for submission
7) Each item in list is selectable and can be submitted
8) Corresponding data is sucessfully captured in database
9) Control follows state management rules when navigating between pagesSrikanth Dasuri
- Aug 30th, 2011
1) check the availability of the check box on application.
2) check the functionality of check box by Enabling.
3) check the functionality of check box by Disabling.
kurtz182
- Dec 13th, 2009
CHECK BOXES1) Physical location and arrangement on page2) Labels associated with each check box3) Check box grouping follows requirement and makes sense4) Initial focus and tab order5) Active or inact...
-
The entry criteria for the preparation of the test plan is the _____
The entry criteria for the preparation of the test plan is the _____ Answer 1 confirmation of the requirements. Answer 2 Initiation of the requirements Answer 3 Plan to have the requirements Answer 4 None of the above
saravanan123
- Aug 10th, 2009
To judge where we have to undergo testing and who willbe doing and what are all the environment requirements it should have
-
What are the possible test cases for account transaction
What are the possible test cases for account transaction module in banking project
kurtz182
- Dec 23rd, 2009
Since the medium was not specified, I am assuming this is an account transaction in an ATM.user interface + screens have proper format and text + buttons correspond to proper i...
saravanan123
- Aug 10th, 2009
Test cases for account transaction through net1.Check whether the user name and password are correct 2.Check whether the user name and password are correct it moves to your personal account by pressin...
-
Effort Varience in QA
What is Effort Varience in QA
kurtz182
- Dec 16th, 2009
Effort variance (EV) calculates variance of actual effort versus planned effort. The formula for effort variance is:Effort variance = [(Actual effort - Planned Effort)/Planned effort] * 100The e...
mathan_vel
- Aug 12th, 2009
This metric gives the variation of actual effort vs. the estimated effort. This is calculated for each project Stage wise Formula EV = [(Actual person hours – Estimated person hours) / Est...
-
Test Cases for Finding Square Root of a Number
Write test cases for a programme which finds square root of a number
ssaradha85
- Jan 24th, 2010
1 ) Chk by giving a input as a empty string2 ) Chk by giving a input as alphabets3 ) Chk by giving a input as special char4 ) Chk by giving a input as whole number 1,2,3,4, etc5 ) Chk by giving input ...
saravanan123
- Jul 10th, 2009
Test Cases for Finding Square Root of a Number
1. Check whether the square root cannot be zero
2. Check whether any 2 same number is multiplied it gives the square root of the number
3. Check whether it displays as result only one number of the square root of the number -
Redundant Testcases
How will you determine if a test case is necessary or redundant?
kurtz182
- Dec 11th, 2009
Here are a couple suggestions:1) Perform a reverse trace on the test cases and aggregate them into contiguous groupings associated each their requirements and compare the cases within these groupings ...
goksn
- Aug 18th, 2009
Redundant test cases are determined, if(i) If similar test cases are present in test case pool or a requirement is having more than similar test cases then it is termed as redundant.Another definition...
-
-
5 Positive/Negative Test Cases for Facebook Like button functionality
Please tell me :
5 Positive/Negative Test Cases for Facebook Like button functionality -
How to write the test cases of Cut/Paste & Copy/Paste in Excel format.
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 14th, 2009
Testcase for Cut / Paste in Excel format
1.Check whether we are typed something in many fields
2.Check whether we can select the 2 rows and 2 columns in excel by clicking and dragging
3.Check whether we are dragging the field it displays the field to be covered with some highlighted colors
4.Check whether we can copy the highlighted field by pressing Ctrl+x
5.Check whether we cut the field it should be blinked
6.Check whether we can select any field in the excel
7.Check whether we can paste the cut fields by selecting Ctrl+v
8.Check whether the field we cut and pasted is correct
9.Verify whether the old field is empty.prabadi
- Mar 25th, 2011
First copy one cell, then cut other cell now paste the date in other cell the most recent data should be pastedSelect one cell cut the data and tries to paste in multiple cells. Select one cell copy the data and try to copy in to multiple cells
saravanan123
- Jul 14th, 2009
Testcase for Cut / Paste in Excel format 1.Check whether we are typed something in many fields 2.Check whether we can select the 2 rows and 2 columns in excel by clicking and dragging 3.Check whe...
-
Write a test case for computer keyboard
- Nov 30th, 2011
Test cases for keyboard: Functional: - Click on each of the keys and check if they are all functional and work as expected - Check if the keyboard cord connects to the specified port types - Verify t...
Dilip Dowpati
- Nov 9th, 2011
Please correct this
your post --- check all keys are pressing in a WRITE way
correct form -- check all keys are pressing in a RIGHT way -
Hii am working into a project where mails has to be sent to the clients i have to write the test cases to test the sending of the mails what are all the possibilitiescan someone write the test cases in a doc and send it to jyothi_katgi@rediffmail.comRegardsjyothi
saravanan123
- Jul 13th, 2010
Test cases for Sending a Mail :Pre condition : Login to any of your account1. To check whether compose mail button should be there2. To check whether when we select compose mail button it must move to...
kalpana
- May 30th, 2007
1. When We click on send button , it displays exact sent message or not.2. When we enter send address in to field ,Cc ,bcc it is accepting or not.3.if we write any message to our client , it is accept...
-
-
What are test cases for Pen
Read Best Answer
Editorial / Best Answer
Answered by: vijay
- Apr 12th, 2007
Test cases for Pen are,
1. Dimension of the pen,
2. Color of the pen,
3. GUI testing: logo of the pen maker,
4. Load testing
4.1 Total length that pen can write,
4.2 Strength of the nib,
5. Usability testing: grip of the pen.
6. Against the surface it can write.
7. Hanger provided in the cap,
8. Integration testing: body of the pen should perfectly fit with the cap of the pen,
9. Ink in the pen, at what temp does the ink get blocked.
10. Size of the nib like 0.5mm/0.6mm
11. Load test: when pen is pressed hard against the hard surface then refill should not come out of the pen from the backside.Likewise can write more test cases.
Inayat Ali Khan
- Aug 6th, 2014
First ask following questions to the interviewer: 1. What type of pen it is? (table Pen or Pocket Pen) 2. Fountain Pen or Ball Pen? 3. If Ball Pen, ask has it cap on the top or push switch on the bott...
Abha
- Jul 18th, 2013
Check the outer colour of the pen is it against the product specification. Check the cap of the pen has it been provided as mentioned or shown in the cover photo of the pen. Check the dimension of the...
-
What is meant by hot keys?
kurtz182
- Jan 7th, 2010
Hot keys are an alternate way of invoking a software command through keyboard input. Hot keys are associated with operating systems and various applications. Hot keys are either hard-coded into an application or they can be defined by the user.
saravanan123
- Jul 11th, 2009
Hot Keys are nothing but keys with their own desired function i.e the keys general function are same for all the applications
-
What can be the various test cases for a pen? The test cases should be of high standards.
saravanan123
- Jul 21st, 2009
Test Case for Pen1.Check whether the pen is writing in which colour2.Check whether we can see the liquid from outside3.Check whether the pen is ballpoint or ink4.Check whether the pen is compact at th...
Leena
- May 17th, 2006
one more Testcase from my side...I will intentionaly throw the pen down on floor..to check how much brittle it is ,is it broke down or not.
-
On which test cases should regression testing be performed?
Read Best Answer
Editorial / Best Answer
mithr17- Member Since Oct-2011 | Oct 17th, 2011
Re-testing is testing the failed test cases and the bugs that have been fixed in current build. Regression testing is done to make sure the "bug fixes" do not affect the surrounding code (features). So the test case selection really focuses on which feature were affected by bugs. Lets take an example: Suppose you are testing a banking application (everyone does online banking these days) and you found a bug in checking account feature. Say the bug is about amount not automatically adjusted after money is credited by State Bank (specifically) to checking account. When this bug is fixed, you need to run test cases pertaining to different type of checking account credits etc need to be run again even thought they have passed.
mithr17
- Oct 17th, 2011
Re-testing is testing the failed test cases and the bugs that have been fixed in current build. Regression testing is done to make sure the "bug fixes" do not affect the surrounding code (features). ...
gibibabu
- Oct 12th, 2011
Regression testing should be performed on test cases that have passed and failed, both.
Test Cases Interview Questions
Read Best Answer
Ans