Deepti

• Nov 3rd, 2014

A functional requirement is that it essentially specifies something the system should do. A non-functional requirement is that it essentially specifies how the system should behave the difference b...

Answer Question  Select Best Answer

sridevi

• Dec 6th, 2014

Retesting is the testing performed on a fixed defect to verify it is working fine or not.

regression testing is the testing performed on the modified application to verify whether the fixed defect is impacting on the other related functionality of the application.

manoj

• Nov 26th, 2014

Whenever there is a change or updation in codings or requirements regression testing is performed it is done to validate that the changes had cause any impact to other modules in a project. Whereas in retesting is to validate the existing testcase after a bug has been fixed.

Answer Question  Select Best Answer

What is Non-functionality Testing in software?

srujanareddyg

 Profile Answers by srujanareddyg Questions by srujanareddyg

• Jan 12th, 2015

In NFT the quality characteristics like efficiency, usability, reliability, portability, scalability, security, volume, etc. of the component or system are tested. Example: How many people can login ...

Anu

• Jan 9th, 2015

Function testing is is the type of testing done against the business requirements of application.

The non Functional Testing is the type of testing done against the non functional requirements.

Answer Question  Select Best Answer

What is co-existence testing? Why do we do it? What would be the passing criteria for a successful co-existence? Any sample application where you feel we require this kind of testing?

Read Best Answer

Editorial / Best Answer

kamal1_batra  

 Profile Answers by kamal1_batra Questions by kamal1_batra

• Member Since Nov-2008 | Feb 11th, 2009

---

Coexistence testing involves the working of application, on different hardware & software configurations. It checks the performance of the application with different combinations of different types of resources.

Compatibility testing checks if the two systems or two different resources are able to exchange the information successfully when an application is implemented or installed. This testing is usually performed when an already existing program is replaced with a new application.

Surendra

• Jan 21st, 2015

Do we have any specific tools to perform the co existance testing or a functional automation tool can automate these activities ?
Please help.

kurtz182

 Profile Answers by kurtz182 Questions by kurtz182

• Dec 24th, 2009

Coexistence testing seeks to identify issues when an application works alongside or interacts with other target software on the same machine.  Coexistence testing answers questions such as:1) Wil...

Improve Answer

Differentiate between robustness testing and worstcase testing ?

Zahery

• Apr 7th, 2015

Robustness testing: test using both valid and invalid inputs.
Worst Case Scenario testing: test using extremal(Boundary) values of one input variable.
Robust Worst Case Scenario testing: test using extremal values for every possible input variable.

Answer Question  Select Best Answer

nimesh

• Jun 5th, 2015

SharePoint 2007 Test Data Population Tool (available at CodePlex)
Sporm (available at Codeplex)
Can also Use Typemock Isolator for Testing sharePoint object model.

Answer Question  Select Best Answer

RamaKrishna

• Jun 9th, 2015

Defects leaks out from one level of testing(from testing phase to UAT or Production Phase...) to another level of testing is called defect leakage

chandra

• Jun 11th, 2014

Defect release: The software is released with the known defects is called Defect release

Defect leakage: The software is released with the unidentified defects is called defect leakage

Defect gap: The time gap b/w the defect is identified and fixed..

Answer Question  Select Best Answer

Rick Briggs

• Jun 18th, 2015

Actually a test procedure is the manual execution of a set of test cases.

srujinunna

 Profile Answers by srujinunna Questions by srujinunna

• Jul 2nd, 2010

Test procedure consists of detailed sequence of steps that has to be followed for executing a test, generally test procedure is written from a test case. 

Answer Question  Select Best Answer

If a bug is not found in the testing environment and found in production environment, How will you deal with it?

Read Best Answer

Editorial / Best Answer

crazytester  

 Profile Answers by crazytester Questions by crazytester

• Member Since Dec-2009 | Jan 13th, 2010

---

We need to check 1st whether it was within our testing scope or not. If Yes then we have to do a RCA ( Root Cause Analysis). RCA report must be delivered to all the stake holders. 

Devina

• Jun 28th, 2015

If the defect that has occurred is part of test requirement than check for below points: - Try to re-produce same defect on testing environment, to make sure we have not missed it. - Check with the...

Torsten Zelger

• Nov 18th, 2014

Check your regression test suite whether it contains a scenario that could have detected the issue before it went to production. If yes, find out why it was not executed and give it a higher priority ...

Improve Answer

Gaurav.khurana

 Profile Answers by Gaurav.khurana Questions by Gaurav.khurana

• Aug 18th, 2015

Software Testing Life Cycle 1) Requirement phase-->testing Feasibilty , Automation feasibility 2) Planning --> Test plan, test estimation , Resource plan, Risk contingency,Mitigation ,env 3) An...

Abhinav

• Nov 6th, 2014

1. Requirement Gathering
2. Test Planning
3. Test Designing
4. Test Environment Setup
5. Test Execution
6. Test Closure

Answer Question  Select Best Answer

I have a small query in Manual Testing(am working as a Software Test Engineer).I would like to know the definitions of Test Scenarios,Test Conditions with an example.We can Take a Simple example of a Google Page Login or any ATM related scenario...Please help me in finding the solution.Thanks in Advance.

Gaurav.khurana

 Profile Answers by Gaurav.khurana Questions by Gaurav.khurana

• Aug 18th, 2015

Test basis(requirement) --> test conditions (features to be tested)--> test scenarios(different ways of testing --> test cases (inidvidual unit to be tested)

Mayur

• Jun 3rd, 2015

Test scenario is top view of functionality under test in Test scenario what to test the application,test scenarios identifies cover for all test are completed.

Test Cases is define how to test the application, here we are check happy path negative path, alternate.

Answer Question  Select Best Answer

How do you test when the User Interface is not available? What types of tools would you use?

crystalpellitier

 Profile Answers by crystalpellitier Questions by crystalpellitier

• Sep 12th, 2015

You can use selenium web driver for web based application testing.

Gaurav.khurana

 Profile Answers by Gaurav.khurana Questions by Gaurav.khurana

• Aug 18th, 2015

Test the API by which functionality can be tested. update DB as a work around to proceed. Run the backend jobs by passing paremeters which otherwise would have come from front end. Sometimes you ...

Answer Question  Select Best Answer

Gopinath

• Sep 15th, 2015

Give importance more towards user scenario based testing no where automation can replace manual testing

crystalpellitier

 Profile Answers by crystalpellitier Questions by crystalpellitier

• Sep 12th, 2015

In manual testing time is the main disadvantage.It takes lot of time,so the people are switching to automation testing.

Answer Question  Select Best Answer

I m new to testing field can any one plz tell me how to set up the environment in testing

mano

• Aug 21st, 2012

It is always advisable for tester to set up test environment. Approaches: S/W Test Environment: Collect all the information on the s/w and h/w required for test env. Get the s/w and h/w ready collec...

tbd

• Oct 7th, 2011

Test environment team is responsible to setup the testing environment..once its setup you can continue with the testing


Thanks,

Answer Question  Select Best Answer

Can anyone who have real experience in claims processing.could me please explain me testing process in claims processing..thanks

ravi

• Sep 26th, 2015

Could you please explain how to perform testing on the claim process module and what are the possible test scenario and test case will be there?

prakhash32

 Profile Answers by prakhash32 Questions by prakhash32

• Aug 1st, 2010

Mainly, there are three types of claims as below1. Professional 2. Outpatient 3. Inpatient. There are different types of plans like PPO, HMO, HSA, etc. These plans are assosiated with different contra...

Answer Question  Select Best Answer

What is the expected result for each of the following test cases?


Rule1 Rule2 Rule3 Rule4
Conditions
----------
Citibank Card Member Yes Yes No No
Type of Room Silver Platinum Silver Platinum

Actions
-------
Offer upgrade To Gold Luxury Yes No No No
Offer upgrade to Silver N/A Yes N/A No

reddy

• Nov 29th, 2015

I think D is correct

triveni

• May 10th, 2012

D

Answer Question  Select Best Answer

reddy

• Nov 29th, 2015

Test bug - We cant decided whether the bug is developer bug or test bug. We have only bug

mithr17

 Profile Answers by mithr17 Questions by mithr17

• Nov 1st, 2011

Congratulations! You just won a copyright on the new term "test bug"
There is no bug such as a test and dev bug.

Bug is any behavior that deviates from the requirement. Requirements are the so called "expected" result in test cases.

Answer Question  Select Best Answer

What is Bulk Testing? What is Volume Testing?

Bareddy

• Jan 2nd, 2016

Data volume Testing: It is down to the test the stability of the system webbing huge amount of data

Answer Question  Select Best Answer

How do you automate globalization test cases in Selenium Tool?

shwetali shirke

• Mar 30th, 2016

Yes, closed defect has been tested. As a tester, retesting of defect & regression testing further has to be done.

Bareddy

• Jan 2nd, 2016

According to bug life cycle the bug is closed by tester only.

Answer Question  Select Best Answer