-
What are the steps to prepare Test harness in solaris Environment
srinivasulub1981
- Nov 30th, 2009
HI Test Harness: It is a test envoronment and contains the test cases, software, hard ware, test data, etc... to do the testingi think it's mostly same for all environmentCNU
-
Can you write customized check point if so how?
srinivasulub1981
- Nov 30th, 2009
HI I feel after creating the check point we can edit the props of check poing.. so in that way we can customise the CPCNU
-
How much time is/should be allocated for Testing out of total Development time based on industry standards?
srinivasulub1981
- Nov 30th, 2009
HIIt depends on company and project nature and depends on client...as per our standards 2 devs and 1 tester.....ie 35% approximatelyCNU
kurtz182
- Nov 13th, 2009
The answer depends on the industry under consideration. For example, the banking industry will spend much more resources on testing efforts because of the high risks involved. In contrast,...
-
Examples of unresolved and closed bugs and who is responsible for the completeness / correctness of document
srinivasulub1981
- Nov 28th, 2009
HI Fixing is altimately responcible of dev team only, as a tester we need to follow up...Closing is responcible of tester..CNU
kurtz182
- Nov 15th, 2009
When developers fix an issue, the tester will test the functionality to ensure it is fixed. If the issue is fixed, the tester will place the bug report in 'Closed' status and offer a bri...
-
What should you test when application/program performs slowly?
srinivasulub1981
- Nov 28th, 2009
HIIf i found this type of issues then i will verify the slow performance due to large data or not, and i will intimate to dev team.. they will do the fixes.. the fixation may be query optimization, etcCNU
nkamuni_mca
- Nov 18th, 2008
This kind of issues are quite common in the initial stage of product development...In real time scenario... if the application is performing too slow. We tend to raise this issue to the Team lead and ...
-
Testing Difficulty
Which of the situations below make systems more difficult to test?A. The requirements/specifications are unclear.B. Testers were not involved in the review of the requirements.C. The software provides little information about its internal state.D. The software is so complex, it is difficult to calculate the expected results correctly.E. All of the above.
mathan_vel
- Nov 28th, 2009
Answer) A. The requirements/specifications are unclear. is correctB. Testers were not involved in the review of the requirements. (No Review is needed for the well known Application)C. The software pr...
srinivasulub1981
- Nov 19th, 2009
HIThe ans is : A) The requirements/specifications are unclear.For any of the project Requirements are like a heart to the body, so with out proper requirements, development/testing will become waste.CNU
-
What are the criterias used to differentiate CMMI/PCMMI companies and Six sigma
srinivasulub1981
- Nov 28th, 2009
HIWe are following below prcesses. CMMI Process Areas Level 1(Initial) Level 2(Managed) 1. Requirements Management (Engg) Manage the requirements of the project...
samisalona
- Apr 20th, 2008
CMMI Capability Maturity Model Integration has five maturity levels of software processes:1. Initial: Ad hoc software testing processes2. Repeatable: Able to repeat earlier successes3. Defined: M...
-
What is a failure if a program doesn't work correctly?
Whether its testing issue , programming issue or both
rhkvarma24.qa
- Sep 23rd, 2008
If an application doesn't work properly after it is dispatched into the client environment then the application is said to be a failure.
-
What is the Difference between SRS and PDR
srinivasulub1981
- Nov 28th, 2009
Hi SRS: System Requirement Specifications: It contains the functional requirements of the application. PDR: Premilinary Desing Review: It also contains the system requirements, but with acceptable risk.CNU
rajeevn
- Jun 16th, 2008
SRS - System Requirement Specification It is the document which describes the high level product requirement.PDR - Product development Roadmap It describes the phases and schedules of product under development.
-
Role of Configuration Controller
What are the roles of CC (Configuration Controller) in project?
srinivasulub1981
- Nov 28th, 2009
HIIf we are developing the sofware means definitely there would be some changes so proper maintanance needed in this situations so here configuration controller plays a vital role..He mainly concentra...
kurtz182
- Nov 13th, 2009
In software engineering, the Configuration Controller tracks and controls changes in the software. Their practices include revision control and the establishment of baselines. Depending on...
-
Application Re-Test
In an application currently in production, one module of code is being modified. Is it necessary to re-test the whole application or is it enough to just test functionality associated with that module?
srinivasulub1981
- Nov 28th, 2009
HI In this case i can do the functional testing on pirticular change, and then if required the i will do the Regression testing on an entire application if required.But it's all depends on p...
kurtz182
- Nov 10th, 2009
The depth of any test effort depends on the amount of time and resources management is willing to spend on it. This decision is largely based on the application under test, ranging from applications ...
-
During the start of the project how will the company come to an conclusion that tool is required for testing or not?
kurtz182
- Nov 27th, 2009
The decision to use test tools during the software development process depends on the following factors:1) Requirements and specifications of the application under test,2) The complexity of the a...
rachel123
- May 19th, 2009
If the application is very huge and is phased out in several iterations , they may want to automate the application to prevent the execution of manual test cases as they are time intensive.
-
What are the test cases prepared by the testing team
kurtz182
- Nov 27th, 2009
The types of test cases prepared by a testing team are:1) Build Acceptance Tests (Smoke Tests)2) Functional Tests a) GUI Tests b) Security Tests c...
vk1978
- Apr 10th, 2009
Test Cases prepared to test the application would be
Build Acceptance Test Cases,
GUI Test Cases,
Functional Test Cases,
Integration Test Cases,
Compatibility Test Cases,
System Test Cases,
Positive & Negative Test Cases,
Performance Test Cases,
Security Test Cases -
Which Methodology u follow in ur Testcase?
kurtz182
- Nov 27th, 2009
Methodologies used to prepare test cases:1) Business logic and functional design (from requirements)2) Work-flow (from work-flow diagrams)3) User interface (from specifications) 4) Equivalence class p...
Pattabiraman.A.C
- Jun 8th, 2007
Error : Mistake done by developer in development environment is called ErrorBug : If that defect is found by a tester in testing environment is called bugDefect : If the same error or bug found by the...
-
How to test the product's specification to find bugs before they make it into the software.
kurtz182
- Nov 22nd, 2009
There are a number of ways to minimize the defects that are coded into a product due to problematic product requirements and specifications. They are:REQUIREMENTS1) Cond...
kisskasa
- Jun 18th, 2008
The product's specification, will be tested in the form of Reviews. These reviews results will be taken care of SQA(Software Quality Assuarence - Verification) through different models like Fish Model, Pareto Analysis.
-
1) How is Estimation done in General ? Does it depend on the Complexity Please explain with a dummy Example I want an idea. It is very urgent
kurtz182
- Nov 20th, 2009
It depends on how much of the testing process you are estimating. If you are only estimating the creation and execution of test suites, then the previous example is a very rough guideline. ...
Rreddy
- Sep 7th, 2007
Assume that 10 reqs are there.You can derive test cases for 10 reqs interms of coplexities(low,medium and high).low cplx test case can take 10 min to complete its cycle(preparing+review+execution), me...
-
The user is expected to enter an integer value into each of the three text fields. Upon hitting the OK button the program will print a message in a separate dialog box stating whether the triangle is scalene (all sides are different lengths), isosceles (two sides are the same length), or equilateral (all three sides are the same length). Write a set of test cases (i.e. specific sets of data) that you feel would adequately test this program. Write the tests so that someone other than you can run them.
kurtz182
- Nov 20th, 2009
There is not enough information to create a complete test suite. I would ask the Business Analyst or Project Manager the following questions before I begin authoring test cases:1) Is there any v...
kamatchi
- Sep 26th, 2007
Three different sets of values should be chosen.Each set should be entered separately For eg:First data set(7,8,9)Second data set(9,9,8)-isosceles triangleThird data set(9,9,9)-equilateral triangle ...
-
What is diffrence b/w test cases and used cases
kurtz182
- Nov 20th, 2009
A usecase provides a narrative that describes all of the actions a person needs to perform in order to complete a particular task within an application. This narrative describes workflow in...
vk1978
- Apr 15th, 2009
usecase describes actors actions and corresponding response of the applicationtest cases is a step by step process how to test the functionality of an applicationusecase document is a parent document like BRD FRS SRS using which we can write test case
-
Have you ever converted Test Scenarios into Test Cases?
I said "I have written Test Cases directly from the Requirement Specifications."
kurtz182
- Nov 19th, 2009
The way this question is posed, there must be a distinction between test scenario and test case. Test scenario and test case can not be the same thing here. Therefore, in this context, tes...
Himanshu Man
- Oct 8th, 2008
Test case is basically derived from a test scenario. Test Scenario is a framework telling what we want to achieve whereas a test case describes how to achieve by mentioning all the required steps.
-
What Technical Environments have you worked with?
I said, "I worked on Web-based and Client-server applications."
kurtz182
- Nov 19th, 2009
Environments vary between industries. For example, lab environments in the cellular industry will be radically different than those in the computer industry. In the computer industry, I&nb...
sivakrishna131
- Aug 29th, 2007
This is Very important as per interview.Interviewr wants to know about your company technical environent and client requirements for your current project.You should answer very carefully like I have w...
Testing Common Interview Questions
Ans