-
Top Ten Tips for Bug Tracking
A good tester will always try to reduce the repro steps to the minimal steps to reproduce; this is extremely helpful for the programmer who has to find the bug. Remember that the only person who can close a bug is the person who opened it in the first place. Anyone can resolve it, but only the person who saw the bug can really be sure that what they saw is fixed. There are many ways to resolve a bug....
kurtz182
- Dec 30th, 2009
Top twelve tips for initial bug reporting:1) Ensure you can reproduce the defect before entering defect report2) Ensure there are no duplicates before entering defect report3) Include all relevant det...
preethi.gollamandala
- Sep 9th, 2009
Tester should be able to reproduce the bugbug description should be understadable to everyonewe should assign proper priority & severity to the reported bug we should attach proper screen sh...
-
What are some recent major computer system failures caused by software bugs?
kurtz182
- Dec 26th, 2009
1) In February of 2009 users of a major search engine site were prevented from clicking through to sites listed in search results for part of a day. It was reportedly due to software that did not effe...
shann
- Sep 28th, 2006
hai paul check this out.......# News reports in May of 2006 described a multi-million dollar lawsuit settlement paid by a healthcare software vendor to one of its customers. It was reported that the...
-
How do we track a bug? What is the format of excel sheet in which we write the bug details? How do we give the severity and priority to the bugs?
kurtz182
- Dec 30th, 2009
BUG TRACKING PROCESS: This is a process used to manage defects from the time testers discover them to the time they are closed. When testers discover defects they open bug reports and the ...
-
How would you say that a bug is 100 % fixed ???
kurtz182
- Dec 26th, 2009
You could say that a bug is 100 percent fixed when all of the following conditions are satisfied:1) Learn everything that can be known about the fixed functionality and develop tests based on this und...
preethi.gollamandala
- Sep 9th, 2009
If the reported bug is working fine with out any disturbances and there are no side effects from the fixed bug then we can say it is fixed.
-
Severity and Priority for bugs
Give me example for BUG that has HIGH SERVERITY and LOW PRIORITY and SAME BUG in other case should be LOW SEVERITY and HIGH PRIORITY.Note : It should be SAME BUG NOT TWO DIFFERENT BUGS
kurtz182
- Dec 26th, 2009
DEFECT: Application freezes and forces reboot when entering "Votar a favor Pedro".HIGH SEVERITY AND LOW PRIORITYThis represents an issue that has a significant negative impac...
srinivasulub1981
- Dec 9th, 2008
Before answering this question i would like to say some thing abt my project, mine is a project, it contains both US and UK clients... but both are using same files...Desc about some functionality: A ...
-
What are the different methods to find all the requirements are covered other than traceability matrix ?
kurtz182
- Dec 26th, 2009
I suppose you don't need a traceability matrix to map test cases to requirements. A traceability matrix is just a tool to help you organize your data based on some useful attr...
srinivasulub1981
- Dec 10th, 2008
Other than TRM, we can prepare some check list with Yes/No options whether all are tested/developed or not, or else preparing a good test cases with coverage of all requirements by doing a well review by experts. Srinivas
-
What difference do you find while posting bugs through bugzilla and excel sheet?
kurtz182
- Dec 26th, 2009
Bugzilla is a web-based distributed defect management system. It stores the contents of defect reports in a centralized database thereby allowing users to find valuable information with little e...
imnothegeek_lav
- Dec 10th, 2008
Difference isBugzilla is MUCH MUCH more easier tool to keep track of the bug life.like consider if a bug in bugzilla as well as in an excel sheet.-in bugzilla its a NEW bug. & excel has only a ent...
-
What are tolerance bugs?
kurtz182
- Dec 26th, 2009
A tolerance bug is a defect that gets deferred ("postponed") because its impact on the system is not significant enough to address in the current release. One might say that the functionality in which the defect resides is still "within tolerance".
mathan_vel
- Aug 14th, 2009
The Bug which have the status as "defered" is called Tolerance Bug. Which is not affect in the application any where
-
Bug tracking system
What is the role of bug tracking system ?
kurtz182
- Dec 22nd, 2009
A bug tracking system (a.k.a quality management system) can be used for many things. Its role is:1) To report defects so they can be fixed2) To monitor the status of defects3) To associate defects wit...
rahulskin
- Sep 22nd, 2009
The role of Bug Tracking system is to track the bug.- To know the total bug raised.- To know the total bug functionality wise.- To know the status of the bug like Open, New, Reopen, Fixed, Resolved et...
-
What are the characteristic of efficient bug reporting ?
kurtz182
- Dec 21st, 2009
A characteristic simply refers to an attribute of something. Efficiency means doing things quickly and with least effort while maintaining quality (that is to say, maintaining accuracy and thoro...
goksn
- Aug 12th, 2009
For making the summary report on bugs found, i think the following table structure is must Bugs/Module Closed open In Analysis New In Retest Total High Severity ...
-
What do mean by bug tracking?give example?
kurtz182
- Dec 21st, 2009
Bug tracking refers to a process that enables users to accurately and thoroughly understand the given state of a particular defect. Bug tracking includes the following things:1) o...
sangeethaarjun
- Mar 11th, 2009
Bug tracking is the process of tracking bugs from the time it is identified till it is closed.status of the bug and responsibility mentioned as follows:Raised - TesterAssigned- Test LeadFixed - ...
-
How we can explain a bug which may arrive at the time of tesing. explain that bugs in details.
kurtz182
- Dec 20th, 2009
Explain a bug by doing the following:1) Verify the defect isn't already known and entered in the defect tracking database2) If you have any questions about it, ask other member of the group f...
mathan_vel
- Aug 21st, 2009
Reviewed the bug once to confirm and logged the bug in the Bug Tracking tool with the status as Opened. If still the confustion is there in the bug, consult the same bug with TL and get reproduce. The found bug is described in the Bug Description section.
-
How to post a BUG
kurtz182
- Dec 20th, 2009
Posting a bug is typically done using a defect management tool. However, some test groups use a spreadsheet program. Make sure the defect report contains: 1) defect id2) test case ref...
mathan_vel
- Sep 25th, 2009
Defect Tracking Tool is the easiest way to post and track the bugs. Not all organization is following the Tools. normal way to post a bug is through by reporting the bug in document (Excel, Word) and ...
-
What are the defects in TRACEABILITY MATRIX
kurtz182
- Dec 20th, 2009
Errors can occur when producing a traceability matrix for a test project. These include:1) Requirements may be mapped to the wrong test cases.2) Traceability matrix may reference improper docume...
srinivasulub1981
- Dec 9th, 2008
Defects may be as follows.-> If the mapping is not done properly between the test cases and requirements-> There may be a chance to miss some of the requirements-> There may be a chance to mi...
-
Explain about bug tracking in banking module
kurtz182
- Dec 17th, 2009
The same process is used to track defects across all modules, and it makes no difference what industry these modules were programmed for.
mathan_vel
- Aug 14th, 2009
Bug Tracking is a Tool and it is common for all modules. there is no seperate tool to track for Banking modules.
-
What are the main status in test director and what is reject and refuse status
srinivasulub1981
- May 20th, 2009
I think TD is not being used by any one, all are using QCIn QC, below are the diff types of status.-> new-> Open-> Re-open-> Closed...
-
What is Test Incident Report ? What does it all contain ? What is its format and fields..?
srinivasulub1981
- May 7th, 2009
HiThis report will be prepared by test engineer if any test case failed which is associated more than one test cases.One TIR may describe many test step failures, but all test steps must be associated...
-
What is the Difference between End to End Testing & System Testing
preethi.gollamandala
- Sep 9th, 2009
End to End testing is the final stage of testing done by the end users before relesing product the end users to get confindece on the product(its mainly involves in alpha testign or beta testing)Syste...
srinivasulub1981
- Nov 10th, 2006
Hellow All, The purpose of E2E testing is to ensure that UAT can take place i.e. the application is stable enough for users to concentrate on evaluating business functionality and usability and a...
-
What are the different methods to find all the requirements are covered other than traceability matrix ?
preethi.gollamandala
- Sep 9th, 2009
We can find thru test director or quality center in the test cases coverage along with the status ...this is another approach to cover the urequirements coverage.
shann
- Sep 28th, 2006
Apart from the traceablity matrix the next option is cross verification matrix.
-
What is the difference between SQA Robot and Rational Robot or does both are same?
rajmohan23
- Sep 2nd, 2009
Using Rational Robot tool we can do both type of testing i.e system testing and the performance testing.If you use functional or system testing You have to select the SQA basic language.or If you...
Qadesh
- Oct 10th, 2007
SQA Robot was so named many years before Rational bought the product (at least 1992, if not earlier).M
Bug Tracking Interview Questions
Ans