Explain What is Packet Switched, Cell Switched and Circuit Switched Technology?

genius_mjk

 Profile Answers by genius_mjk Questions by genius_mjk

• Mar 27th, 2010

Circuit Switching: In this type of switching the data which is being transmitted follow the path a particular dedicated path which is set during connection establishment.  Once the connection is ...

ersunitasingh

 Profile Answers by ersunitasingh Questions by ersunitasingh

• Jun 15th, 2009

When the packet is moved from one device to another device on a single network is known as packet switching.Circuit switching is provide a dedicated path between sender and receiver. But packet switching is provide different-2 path between sender and receiver, according to resources available.

Answer Question  Select Best Answer

A firewall is implemented in
1. Routers which Connect internet to internet2. Bridges used in an intranet3. Expensive modems4. User's application programs

Rahul

• Mar 20th, 2013

FIREWALL is used to Block the Malicious Means Suspicios Traffics in the Network.

Efren

 Profile Answers by Efren Questions by Efren

• May 5th, 2010

A firewall could be software or hardware. An example of software is the one that reside on your desktop operating systems like Windows XP. A hardware example is CISCO Pix firewall which is usually con...

Answer Question  Select Best Answer

You need to connect a token ring segment to an ethernet segment. Would you use a router, a brouter, or a bridge? Justify

khushimehta

 Profile Answers by khushimehta Questions by khushimehta

• Nov 20th, 2010

The Ethernet to Token Ring Bridge enables adevice with an Ethernet output to be connectedto a Token Ring network.

Jvachon

 Profile Answers by Jvachon Questions by Jvachon

• Jun 1st, 2010

Bridge

Answer Question  Select Best Answer

If the Server restarts often automatically? What could be the cause? How will you troubleshoot it?

bhagare

 Profile Answers by bhagare Questions by bhagare

• Dec 25th, 2012

It May Cause By Voltage Unequalness, may be any update installed need to restart,May be any Suspecious Entry,etc Virus/Malware ,Unathorise access,May be overheating,Check the Temp. of server room.

venkat

• May 1st, 2012

First we should have to check the prob from event viewer why the server got rebooted after that based on error log we can find out the resolution for that........

Answer Question  Select Best Answer

Assume there are 2 Domain Controllers, one has 3 roles and the second domain controller has 2 roles. If the Domain Controller with 3 roles goes down, Can the users who are under that domain controller login?

Rahul

• Mar 18th, 2013

Depends On Trust Relationship,Two Way Communication,Or One Way Communication,

hasiii

• Aug 10th, 2012

First the 2nd domain have to size the roles from the 1st one , after that users can access to the 2nd with full services

Answer Question  Select Best Answer

Rahul

• Mar 18th, 2013

Please Check the user ID & Password,Check The Lan Connection,If You Have a Domain Controller,Or Any Domain,
Please check the server is ON/OFF,Any Virus Iss,ue,Check the Workstation is in Correct Domain,Please check the you use correct the TCP/IP Setting.............. in Workstation.Like DNS.

Swati

• Oct 18th, 2011

May not remember the id or password right.

the password might have expired.

may not be choosing the right domain name at the log on screen.

computer might not be added to the n/w domain.

LAN n/w may be down.

Answer Question  Select Best Answer

When you enter the URL in the browser what it sends to the server ?
What is the path followed by the request sent by the Browser?

nathsambu

 Profile Answers by nathsambu Questions by nathsambu

• Dec 22nd, 2012

When we enter url, browser send ip address of url to the nearest ISP. Different ISP, this ip reach the DNS server. DNS server resolve the ip to name i.e. convert ip address to the web page and again send through the isp to the client

pavan.mustyala

 Profile Answers by pavan.mustyala Questions by pavan.mustyala

• May 17th, 2012

Browser sends a DNS query to the configured DNS server in the network. DNS server responds with the IP address. This is for name resolution. Network Connection is then established to the IP address re...

Answer Question  Select Best Answer

whats the use of higher-order bits in ip class addressing ? like for class "A" its 0
Class "b" its "10" and so on

neel rupani

• Sep 6th, 2018

Can you please explain how?

hemanshu trivedi

• Mar 1st, 2014

Higher order bits are use to identify the default class of the subnet

Answer Question  Select Best Answer

What is Load Balancing?

badshashorif

• May 10th, 2016

In computing, load balancing distributes workloads across multiple computing resources, such as computers, a computer cluster, network links, central processing units or disk drives. Load balancing ai...

rahul

• Dec 27th, 2015

If we have two internet lease line, while switching of traffic from one link to another

Answer Question  Select Best Answer

Ashish Mittal

• Oct 17th, 2007

Hi,??? We are using the private range in our network because with the help of that we can easily differentiate it from the outside network. There are some specific range of the private ipClass C- 1...

Ajit

• May 14th, 2006

HiI want to add one thing that whan we r using private ip address (which r free for every user ,while public ip 's are paid ip's provided by the isp) if we want to connect with internet we have to use...

Answer Question  Select Best Answer

lucky_2friends

 Profile Answers by lucky_2friends Questions by lucky_2friends

• Apr 23rd, 2007

Windows 2000 Terminal ServicesTerminal services may be provided by Windows 2000 server computers. Terminal services can allow remote computers to run desktops and applications on a server as though i...

bhanu prakash

• Oct 3rd, 2006

Terminal ServicesFirstly you have to configure Terminal Service in Control panel , Add/Remove Programme.IN Terminal Sevices you can configure your Server and Client PC's through Terminal service from ...

Answer Question  Select Best Answer

ashishrs

 Profile Answers by ashishrs Questions by ashishrs

• Jun 8th, 2009

1. If the workstation has static public IP then it is simple. Type ftp://abcd in FTP client running on outside computer connecting to internet where abcd is the IP-address of the workstation.If th...

Boti Curry

• Jan 5th, 2007

I am going to make a few assumptions to this vague question. I am assuming that the the FTP workstation is running FTP server and all IP addresses are publically routable IP addressess. Now it is quit...

Answer Question  Select Best Answer

Kiran Sadasivan

• Mar 29th, 2013

Its loop prevention mechanism in distance vector routing protocols.

Rahul

• Mar 18th, 2013

Split Horizon,it is a ,away or method to avoid the Routing Loop,It generally happens in LINK State Routing Protocol, means Router Send the update or any information to another Router those receiving router does not send the
information back to sender router

Answer Question  Select Best Answer

rabindra kandher

• Aug 31st, 2007

to add a client system at first we need to type of configuration logical & physical . at 1st we have to check all the client system including domain server properly connected with the hub or switc...

sac

• May 3rd, 2007

For configuring client from 2000 ads serverYou need to take the following step Right click on My Computer - Properties - In Computer Name Tab?- Click on change?TabThen in?domain box type the nam...

Answer Question  Select Best Answer

sarunhere

 Profile Answers by sarunhere Questions by sarunhere

• Dec 26th, 2007

Ya Every answer is correct still you have to prepare some basic LikeDNSDHCPWINSTrouble shooting with networkRouter conceptand Domain Conceptif you know mail server it will be good for youBest of luck

vmshenoy

 Profile Answers by vmshenoy Questions by vmshenoy

• Jan 8th, 2007

Hi vijay first of all best of luck for ur interview!1)u should have idea of OSI layers2) should know abt some basic commands like PING,IPconfig3)should know abt IP addresses.4)which type of IP class does india use?5)ethernet 6)Traffic control algo like leaky bucket and token bucketBEST OF LUCK

Answer Question  Select Best Answer

Definition of networking and remote networking; detailed answer

Rahul

• Mar 20th, 2013

Networking is joining of two or more computer or networking devices through wire or wireless network, in order to shared resources like software and hardware, Remote networking is means we solved the...

shiva6950

 Profile Answers by shiva6950 Questions by shiva6950

• Jun 19th, 2010

Networking:  network is group of devices.like hosts,routers,switches,hubs etc used to communicate each others. and share the information .remotenetwork:Is a collection or group of ...

Answer Question  Select Best Answer

What is the difference between Web Server , Application server and Database server with a perfect application server?

bhagare

 Profile Answers by bhagare Questions by bhagare

• Dec 25th, 2012

IN Web Server We Design a Web site make it Public/private and fetching it for information Throughout organization or out of organization. IN Application Server,We Stored the Application/Software Setup...

manoj thakur

 Profile Answers by manoj thakur Questions by manoj thakur

• Oct 31st, 2012

Web server - which holds the information of sites
Application server holds info of all the application we use
Database server is one which is used to hold all the data of users ...

Answer Question  Select Best Answer

Rahul

• Mar 28th, 2013

Check the Driver of Ethernet card,
Check the Patch Code,
Check the Connection from I/O Port to LAN Port of Laptop,
Check the TCP/IP Configuration,
Repair the TCP/IP,
Check the I/O port,
Check the Pairing Of Patch code,
Check the Connectivity From Switch to I/O Port,
In Extreme Case check the Router.

rinku_prd

 Profile Answers by rinku_prd Questions by rinku_prd

• May 19th, 2010

If all went well, you should get output resembling the following: ... From here you can treat the ndis0 device like any other network interface (e.g., dc0). .... sure the device is not conflicti...

Answer Question  Select Best Answer

vinoth

• Apr 14th, 2012

HP open view is a best monitoring tool... its works on SNMP protocol. it discover the network and analysis the server and report the error log or generate the ticket.....

infe12

 Profile Answers by infe12 Questions by infe12

• May 30th, 2008

HPOV - HP OpenView is tool related to service desk operations where tickets will be logged in case of a IT related issue. This tools maintains the CMDB of a particular organisation by which a ticket can be logged on the end user's name stating the issue and assigning it to the related groups

Answer Question  Select Best Answer

vinitogupta

 Profile Answers by vinitogupta Questions by vinitogupta

• Mar 26th, 2009

A protocol like NetBEUI does not use any logical addressing, and isnt routable. because when a router comes across a NetBEUI packet, it has no way of determining where the destination host resides,...

MotoRooter

 Profile Answers by MotoRooter Questions by MotoRooter

• Sep 10th, 2008

Even though they are both network protocols, TCP/IP works on large, routed networks, and is used on the vast majority of modern enterprise networks, as well as the Internet. NetBEUI is an outdated network protocol useful only for older versions of Windows networks that reside on a single LAN.

Answer Question  Select Best Answer