-
When do you start developing your automation tests?
mohan056
- Jan 14th, 2008
To start writing test script 1) The application should be stable. 2) Application Bug density should be Low. 3) After 3 rd or 4th Release only to start writing the test script.
maveric systems sarathi
- Jan 7th, 2008
We can start the automation after the 80% of the cases have been covered by manual testing
-
What are the drawbacks of AD-HOC testing and ways to overcome them?
kurtz182
- Nov 7th, 2009
Ad-hoc testing supplements structured, functional black-box testing and is not meant to stand on its own. Typically, testers are asked to use their imaginations to find defects outside their structure...
vk1978
- Mar 12th, 2009
With the help of a prepared Test case we can give some input data and verifying the expected results, here we can analyze the application blindly by following the Test cases, but it?s not possible wit...
-
Importance of Testing in SDLC
What is the importance of testing in SDLC?
kurtz182
- Dec 22nd, 2009
Testing is important throughout the Software Development Life Cycle because:1) it identifies and reports defects so they can be fixed2) it helps key stakeholders understand the state of prod...
hareeshmte
- Jul 7th, 2008
SDLC: Software Development Life Cycle is the process of building the application or product or project through different phases.Requirement - H/w, S/W Resources, Plan, Team Size, Budget and etcAnalysi...
-
What is difference between the Build version id and software version id
Read Best Answer
Editorial / Best Answer
poo09in- Member Since Jul-2008 | Jul 21st, 2008
Build version Id is the id given to the application when it is released with in the company during different life cycles and Software verion Id is the id given to the appliction when it is released outside the company for the customer
Vishnu Kethireddy
- Jul 26th, 2011
Software version is the version of the market released software
Where as the build version or build id is the version used for testing and further test cycles, before the code is released
honey garg
- Jul 25th, 2011
Build is a Executable file which is handed over to the tester to test the functionality of the developed part of the project. Release is that which we finally hand it over to the client of the pro...
-
Input and Outputs
Input and outputs are most important in which type of testing a. Black box testingb. White box testingc. Decision testingd. Exploratory testing
kurtz182
- Dec 19th, 2009
I choose: a) Black-box testing and d) Exploratory testingBlack-box testing is based on the concept that testers are to view any system under test like a black box without knowledge of ...
vk1978
- Mar 11th, 2009
friends, i too agree that if i consider Test data, Inputs and Outputs are very Important in Black box testing, as most of the test cases will have some input (data) and by doing some transactions ther...
-
What is exactly the requirement testing?
kurtz182
- Dec 19th, 2009
Requirements testing is simply the art and practice of functional testing. It is the process of 1) gathering requirements, 2) understanding them, 3) creating test cases based on them, 4) and executing those test cases to verify that the system under test satisfies the requirements.
vk1978
- Mar 11th, 2009
Requirement's Testing - I dont think so there is something like requirement testing. but as a tester I review all the requirements, attend review meetings, if i have any issues with the requi...
-
Intergration testing
How you will write test cases for integration testing? Explain me with an example
sharads
- Dec 7th, 2009
Before we begin Integration Testing it is important that all the components have been successfully unit tested.Integration Testing Steps: Integration Testing typically involves the following Steps: ...
Himanshu Man
- Oct 8th, 2008
Testing of 2 or more than 2 modules of application/applications is integration testing. It involves validation of data flow via xml or any other technology in between modules.
-
Factors affecting a manual testing project
What are the factors affecting a manual testing project and what are the ways to overcome it?
Nitinkk
- Aug 27th, 2009
Factors affecting a manual testing project are :1- Domain Knowledge.2- Testing Technique u applied.3- How Effective Test Scenario u created to cover the functionality
preethi.gollamandala
- Jan 14th, 2009
Hello friends based on the project size we are going to decide to use Manual testing or Automation Testing.If the project size is very less i mean to say intems of functionlaities we are going to use ...
-
Fixing of Bugs
In which phase of SDLC, the fixing of bugs is least expensive?In which phase of SDLC, the fixing of bugs is most expensive?
kurtz182
- Dec 22nd, 2009
Fixing defects is - least expensive in the Requirements Gathering phase of SDLC and - most expensive in the Maintenance phase of the SDLC.
kurtz182
- Nov 22nd, 2009
The cost of defects is less when found in the requirements gathering phase and the cost is most expensive when discovered in the deployment phase.
-
Testing New Functionality
When developer added a new functionality in the application why do tester needs to make sure that added new functionality does not break the other part of the application?
prajeshbe
- Apr 18th, 2010
I wants to give one real time example for this question.Consider a ticket booking application for film. You have done testing the application and it is working fine in the expected way like login to t...
wieckedkyle
- Mar 15th, 2010
One of the role of a software tester is to test that the application is working as intended when new functionality has been added which is called regression testing. This is simply to make sure that the requirements either old or new were met in a business perspective approach.
-
Regression Testing Testcase Set
How many functional test cases are included during build regression testing? For ex: if there are 100 functional test cases will you execute all the test cases again during regression testing?
-
Manual Testing Daily Status Report
What you will write in daily status report?
-
How would you test a fast lazer printer?
Komal
- Jan 6th, 2016
I want test cases for printer status i.e. when printer is jam or out of paper or out of order.
StevenPace
- Jul 12th, 2008
1.Random Text, try all characters, most common fonts.2.Graphics, design a page that uses the most memory possible, often laser printers run out of memory and fail to print part of the page.
-
What is inspection,review
I dont know
billyin
- Jan 14th, 2008
-A review is the process under which static white-box testing is performed-Inspections are the most formal type of reviews. In inspections, the person who presents the code, the presenter o...
sailaja.ragampudy
- Nov 5th, 2007
The checking process conducted on roles without any prior intimation is called inspectionReview is the study of the documents done by respective roles depending on the context.
-
What is Test Scenario?
vk1978
- Mar 13th, 2009
Test Scenario is a set of events with end to end transactions for a business point of view. Test Scenario is a series of events that are associated together. I cannot say my definition is right bu...
shilpasurya
- Aug 5th, 2008
A Test Scenario is testing behavior of the application under test, under specific test conditions and test environment.Ex. User loginScenario 1 - Correct username & incorrect pwdScenario 2 - incorrect username & pwd
-
-
One person reviews a QA test plan prepared by his counterpart and gives him comment.It is a part of?a) QCb) QAc) Bothd) None
kurtz182
- Nov 22nd, 2009
The act of reviewing a test plan is a Quality Assurance function. Therefore, my answer is b) QA. This is not an easy call because a test plan includes elements of Quality Assurance and Qua...
vk1978
- Mar 17th, 2009
It is QA's part as it is involved in Verification, where as QC is involved in Validation.
-
How do we know about the build we are going to test? where do you see this?
StevenPace
- Jul 12th, 2008
correct build numbers should be built into the binary, and also appear in the documents, and they should agree. If they do not, this is a serious problem. You do not want to waste time rep...
ramesh.natarajanm
- Jul 3rd, 2008
Hello,1. It will be mentioned in the Testplan at the time of preparation.2. Dev team will send the Release notes doc to Test Lead,in that doc it will be mentioned.Ur'sRam~
-
What is defect leakage?
shravaa
- Jul 12th, 2007
When there is a defect which is un-noticed and proceeds to the next phase of the life cycle, the defect is said to be leaked from the earlier ones.Defect leakage is one other factor which can help in ...
Pattabiraman.A.C
- Jun 20th, 2007
If a defect left undetected in one level of testing and found during some other level of testing is called as "Defect Leakage". (i.e.) When a defect left undetected during integration testing and was found during system testing that is called defect leakage.
-
Hi,Can anybody clear me about Equivalance Class partition.
sanumca
- Sep 13th, 2009
Equivalance Class Partition is a Black box testing technique, in which the input data is divided into classes such that, the software functionality remains same for any value of same class. A class is...
G.D.S.Prasad
- Dec 22nd, 2006
Hi,This method divides the input domain of a program into classes of data from which test cases can be derived. Equivalence partitioning strives to define a test case that uncovers classes of errors a...
Software Testing Interview Questions
Read Best Answer
Ans