What is dock audit?

Makwana bharatkumar

• Jun 14th, 2019

Yes sir,
But how to improve dock audit.

siva

• Dec 8th, 2017

It is one of the check sheet prepared by QC inspector for verifying the packaged and FG parts are properly packed

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) Problem SolvingB) Problem IdentificationC) Problem CreationD) None of the above

Manjesh

• Oct 19th, 2018

A) Problem Solving

Kongu sri

• Jun 30th, 2018

A) Problem Solving

Answer Question  Select Best Answer

What is the difference between Quality Assurance, Quality Control and Audit Function.

Sagar detroja

• Mar 13th, 2018

The maintenance of a desired level of quality in a service or product, especially by means of attention to every stage of the process of delivery or production.

ameena

• Aug 11th, 2016

Quality assurance is a set of activities involved in the processes and Quality control is set of activities involved in product and audit function is nothing but periodic inspection in the quality system.

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) DefectsB) VariabilityC) ProductionD) wastagesExplanation: SPC is the application of statistical techniques to reduce and infact eliminate variations in the processes

MOHAMMED ANEES

• Mar 12th, 2018

B) Variability

Paramodi

• Jan 22nd, 2017

B) Veriability

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) Total Quality managementB) Total Quality materialC) Technically Quality Material

siva reddy

• Jan 24th, 2018

A) Total Quality management

suman

• Dec 26th, 2017

Total Quality Management

Answer Question  Select Best Answer

Abhishek jha

• Jan 11th, 2018

Quality control take CORRECTIVE ACTION during production,
Quality Assurance take PREVENTIVE ACTION during development or after production (for completely prevention, if any defect arise)

Vibhuti Mishra

• Jul 5th, 2017

Quality control is the process of identity the defect and quality assurance is a process of improvement Quality control is reactive Action quality assurance is a protective action QC is a set of acti...

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) It is used to monitor the number of defects per unit

Abhishek jha

• Jan 12th, 2018

In case of given ATTRIBUTE DATA and DEFECT PART of one sample

ameena

• Aug 11th, 2016

C chart is used when the item is too complex to analyse the product for confirming or non confirming and sub group size is same

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) Meaning 99.999997% perfect; only 3.4 defects in a million.B) Meaning 5.6 defects in a millionC) Defect of one sixth of the product is acceptedD) None of the above

Abhishek jha

• Jan 12th, 2018

99.99967% (3.4 PPM)

kurtz182

 Profile Answers by kurtz182 Questions by kurtz182

• Dec 25th, 2009

Actually, six sigma represents the six standard deviations from the mean toward the upper specification limit in a normally distributed sample where an average of 3.4 defects per million are reported to live.   

Answer Question  Select Best Answer

What is the maximum Acceptable Tolerance Limit for any product?

Abhishek jha

• Jan 11th, 2018

It is a TOLERANCE limit which is set by CONSUMER for acceptable any lot, parts, etc.

Papiha Gotmare

• Nov 17th, 2017

+/-5%

Answer Question  Select Best Answer

What can be implemented to reduce rework in acoustic enclosure in a DG set manufacturing company

grace

• Jan 2nd, 2018

Proper machine maintenance,
Consistent quality checks on product,
Purchasing of quality raw materials,
Training and awareness of the operating procedure of the machine.

sudhakar redddy

• Oct 27th, 2017

Increase the yield and customer satisfaction

Answer Question  Select Best Answer

K. karthikeyan

• Aug 22nd, 2017

Product quality is a one complete details and analysis data and before customer give to proper quality of material life depth of analysis is known as product quality Process quality is a instructions ...

Ranjeet rai

• Aug 19th, 2017

Product quality deals with the given specification of an individual product where as the process quality deals with the process capability of the process that how much it can be effective to produce the quality products.

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) Range is the difference between the Highest observation in the Sample to the Lowest obervation in the sample

Himansu mohanty

• Aug 25th, 2017

USL - LSL

ameena

• Aug 11th, 2016

Range is the difference between observed high sample to low sample value

Answer Question  Select Best Answer

dharma

• Aug 3rd, 2017

Risk can be anything lead to failure, I will try to face problem, and analysis to monitor where problem is create identified

a

• Aug 11th, 2016

Risk means probability of loss, damage it can prevent by identifying before it happens.

Answer Question  Select Best Answer

Mohammad Shams Tabrez

• Jun 3rd, 2017

Tracking by sampling process, through
FIR (Final Inspection Report)
FOI (First Off Approval Inspection Report)
Patrol Inspection Report

NAVEENKUMAR

• Nov 26th, 2015

Tracking by sampling process, through
FIR (Final Inspection Report)
FOI (First Off Approval Inspection Report)
Patrol Inspection Report

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) TrueB) False

Saini

• Apr 29th, 2017

True
We will take data within a fixed time interval

kundan mishra

• Oct 13th, 2011

150 nos of sample taken in 30 days as 5 nos per days to examine for spc

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) decreasesB) equalsC) improvesD) eliminatesExplanation: More the control on variations, more is the probability of the product or service meeting the specifications and standards

Lakshmipathy

• Mar 30th, 2017

C) Improves

ameena

• Aug 11th, 2016

C) improves

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) 99.73%B) 99.99%C) 99.10%D) 99.78%

Oluwafemi

• Aug 26th, 2016

99.73%

kuchelarao

• Aug 24th, 2016

99.73%

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) American Socitey for Quality Control

ameena

• Aug 11th, 2016

American Society for Quality Control

sudhakar2068

 Profile Answers by sudhakar2068 Questions by sudhakar2068

• Sep 13th, 2006

  ASQC:American Society for Quality control, the primary trade organization for quality improvement. sudhakar kolla.If you have doubts can ask me.My Email:kollasudhakar2005@yahoo.co.in.My Number:09819859346.

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) TrueB) FalseExplanation: X bar means Average or Mean of the samples

ameena

• Aug 11th, 2016

A) True

kurtz182

 Profile Answers by kurtz182 Questions by kurtz182

• Dec 25th, 2009

A) True

Answer Question  Select Best Answer

Skill/Topic: Statistical Process ControlA) VariationExplanation: Even though the process may be stable, it will still have variation. This variation could be due to Common causes.

naveenkumar

• Nov 26th, 2015

Yes, it is common, because machine error or equipment error as possible in process

kannan.v.m

 Profile Answers by kannan.v.m Questions by kannan.v.m

• Jul 3rd, 2012

Common cause variations

Answer Question  Select Best Answer