-
In Normal Distribution, the measurements concentrate near ___________
Skill/Topic: Statistical Process ControlA) MeanB) MedianC) Mode
-
A stable process that is centred on target and has small enough variation will offer little chance of non-conformance. Such processes are known as ________
Skill/Topic: Statistical Process ControlA) AbleB) CapableC) adaptibleD) reliable
-
___________ Analysis, looking for relationships between various data points being collected
Skill/Topic: Statistical Process ControlA) RegressionB) CorrelationC) Breakeven
-
_______________ developed Control Charts
Skill/Topic: Statistical Process ControlA) DemingB) ShewhartC) ParetoD) Joseph Juran
-
LSL is the highest level considered to be acceptable
Skill/Topic: Statistical Process ControlA) TrueB) False
-
Armand V. Feigenbaum developed the concept of Total Quality Control
Skill/Topic: Statistical Process ControlA) TrueB) False
-
If only one of the LSL or USL isset, then it is the characteristic has a one-sided tolerance.
Skill/Topic: Statistical Process ControlA) TrueB) False
-
According to Juran, Quality is fitness to intended use
Skill/Topic: Statistical Process ControlA) TrueB) False
-
How many parameters are there in BETA Distribution?
Skill/Topic: Statistical Process ControlA) 1B) 2C) 3D) 4Explanation: BETA Distribution has four parameters: a and b, which are, respectively, the minimum and maximum values that a beta random variable can assume, and g and h, which are the shape parameters.
-
Who is the Customer of a Process?
Skill/Topic: Quality ProcessA) In Process Improvement, we define the customer as ‘the next person in line’ – whoever receives the output or value of the product or service.
-
The Bell-Shaped curved is also an example of a ___________ distribution
Skill/Topic: Statistical Process ControlA) SymmetricB) Asymmetric
-
The specification limits for the inside diameter of a hole are (0.995", 1.005"). The standard deviation of the inside diameters generated by a lathe machine selected to process this component is estimated to be 0.002". Compute the Cp index of this process. Assume that the inside diameters generated by the machine follow normal distribution
Skill/Topic: Statistical Process ControlA) 0.7444B) 0.8333C) 0.9673D) 0.8777Explanation: Cp = (USL-LCL)/ 6σ = 1.005 - 0.995 / (6 * 0.002 )= 0.8333
sudhakar2068
- Dec 16th, 2006
specification is 0.8333sudhakar kolla,Email ID:kollasudhakar2005@yahoo.co.in.Ph:+91-9819859346
-
Process Capability Ratio PCR or Cp = ------------------------------
Skill/Topic: Statistical Process ControlA) Cp = (USL-LCL)/ 6σExplanation: In this formula, USL and LSL are the upper and lower specification limits of the quality characteristic, respectively. The quantity in the denominator, 6σ signifiesthe fact that 99.73% of the values generated by the process is contained within
sudhakar2068
- Dec 16th, 2006
Cp = (USL-LCL)/ 6σExplanation: In this formula, USL and LSL are the upper and lower specification limits of the quality characteristic, respectively. The quantity in the denominator, 6σ sign...
-
Process capability is ____ times Standard Deviation
Skill/Topic: Statistical Process ControlA) 4B) 5C) 6D) 8Explanation: Process Capability = 6σ
sudhakar2068
- Dec 16th, 2006
Process Capability is 6 times standard deviationsudhakar kolla,Email ID:kollasudhakar2005@yahoo.co.in.Ph:+91-9819859346
-
What is a Process?
Skill/Topic: Quality ProcessA) A set of related activities that provide an output for a customer. The output can be a product or a service
sudhakar2068
- Dec 16th, 2006
It process the output to the customer service by the agent regarding the product or output of the severices.sudhakar kolla,Email ID:kollasudhakar2005@yahoo.co.in.Ph:+91-9819859346
vishal
- Jan 10th, 2006
hi, Process is sequence of steps performed for a given purpose, in order to get the quality product..
-
-
Proportion of Defectives is given by the formula p= 2*P[Z> 3Cp ]
Skill/Topic: Statistical Process ControlA) TrueB) FalseExplanation: In this formula, P[Z> 3Cp ] can be obtained from the Standard Normal Distribution Tables
-
Process capability analysis relates the mean and the variance of the distribution of a quality characteristic to the specificationtolerance limits and gives numerical measures of the extent to which the above conditions are met.
Skill/Topic: Statistical Process ControlA) TrueB) False
Rama
- Sep 28th, 2006
True
-
Quality Control Charts were introduced by ___________
Skill/Topic: Statistical Process ControlA) DemingB) Walter ShewartC) TaguchiD) FisherExplanation: One of the most commonly used statistical tools,control charts, was introduced by Dr. Walter Shewart in 1924 at Bell Laboratories.
-
There are different variables that affect the output variable
Skill/Topic: Statistical Process ControlA) TrueB) False
p k varma
- Nov 19th, 2009
True, controllable inputs, dicrete noise variable, continuous noise variable.
Quality Control Interview Questions
Ans