Explain distance vector routing algorithm with the help of suitable example.

susheeljain1679@hotmail.com

• Jan 12th, 2015

At the present time there is a good distance vector routing protocol is EIGRP. It can use the best route to send the packets as per neighbor route metric and selects the best metric calculation.

rahul nikam

• Nov 8th, 2014

What is distance vector routing?

Answer Question  Select Best Answer

A person would like to access a file on another computer (connected via LAN) while working with safe mode. What should he do?

Rahul

• Mar 20th, 2013

Shared those file, Configured the permission Shared level, Group Permission, If Your Workstation having in a Domain,
Configured the Permission by the Manner.
Then called that Workstation by IP,
Enter the User ID and password.

vinitogupta

 Profile Answers by vinitogupta Questions by vinitogupta

• Mar 26th, 2009

A person can access a file on another computer in safe mode if a person is using safe mode with networking, if a person is only using safe mode then network drivers wont be enable due to which a perso...

Answer Question  Select Best Answer

In IPV6, What is the difference between 6in 4 and 6 to 4

sourabh yadav

• Oct 28th, 2015

6in4 is an Internet transition mechanism for migrating from Internet Protocol version 4 (IPv4) to IPv6. 6in4 uses tunneling to encapsulate IPv6 traffic over explicitly-configured IPv4 links 6to4 is...

Rahul619

• Mar 31st, 2015

1..IPv4 Subnetting is possible whereas in IPv6 subnetting is not possible 2..IPv4 has 4 octet and each octet is of 8 bit(total 32 bit) whereas in IPv6 has 8 octet and each octet is of 16 bit(Total 12...

Answer Question  Select Best Answer

If DNS Server is down, what steps will you take to troubleshoot?

sbmk_bala

 Profile Answers by sbmk_bala Questions by sbmk_bala

• Dec 22nd, 2011

DNS Means Domain Name Service
DNS Server down means server is not available at that pont of time, there will be a lot of causes for that. DNS Server converts human fiendly loguage in to ip addresses when user browses. Otherwice user has to use ip address of perticuler server for browsing.

Mahi

• Sep 19th, 2011

1. Verify that the server computer has a valid functioning network connection. First, check that related Server hardware (cables and network adapters) are working properly at the client using basic ...

Answer Question  Select Best Answer

ajithprasad

• Jul 26th, 2015

Control Plane is the traffic of the routing protocol (eg: rip,ospf,eigrp, depending on what protocol is being used in the network.)
Data Plane: Dataplane carries the actual data.

Asif Shaikh

• May 25th, 2014

control plane & Data plane is resources of device , they distinguish into two part control plane & data plane & reserved 50 to 50% bandwidth for that, normally control plane is carry control packet li...

Answer Question  Select Best Answer

Ashish Mittal

• Oct 17th, 2007

Hi,??? We are using the private range in our network because with the help of that we can easily differentiate it from the outside network. There are some specific range of the private ipClass C- 1...

Ajit

• May 14th, 2006

HiI want to add one thing that whan we r using private ip address (which r free for every user ,while public ip 's are paid ip's provided by the isp) if we want to connect with internet we have to use...

Answer Question  Select Best Answer

lucky_2friends

 Profile Answers by lucky_2friends Questions by lucky_2friends

• Apr 23rd, 2007

Windows 2000 Terminal ServicesTerminal services may be provided by Windows 2000 server computers. Terminal services can allow remote computers to run desktops and applications on a server as though i...

bhanu prakash

• Oct 3rd, 2006

Terminal ServicesFirstly you have to configure Terminal Service in Control panel , Add/Remove Programme.IN Terminal Sevices you can configure your Server and Client PC's through Terminal service from ...

Answer Question  Select Best Answer

ashishrs

 Profile Answers by ashishrs Questions by ashishrs

• Jun 8th, 2009

1. If the workstation has static public IP then it is simple. Type ftp://abcd in FTP client running on outside computer connecting to internet where abcd is the IP-address of the workstation.If th...

Boti Curry

• Jan 5th, 2007

I am going to make a few assumptions to this vague question. I am assuming that the the FTP workstation is running FTP server and all IP addresses are publically routable IP addressess. Now it is quit...

Answer Question  Select Best Answer

Kiran Sadasivan

• Mar 29th, 2013

Its loop prevention mechanism in distance vector routing protocols.

Rahul

• Mar 18th, 2013

Split Horizon,it is a ,away or method to avoid the Routing Loop,It generally happens in LINK State Routing Protocol, means Router Send the update or any information to another Router those receiving router does not send the
information back to sender router

Answer Question  Select Best Answer

vinitogupta

 Profile Answers by vinitogupta Questions by vinitogupta

• Mar 26th, 2009

Active Directory is an implementation of LDAP directory services by Microsoft for use in Windows environments. Active Directory allows administrators to assign enterprise-wide policies, deploy program...

amarjeet7

 Profile Answers by amarjeet7 Questions by amarjeet7

• Sep 6th, 2007

Active directory As per name its the directory of active objects in you Domain. Active directory first time introduced in windows 2000 family, In active directory we can maintain all user records, pri...

Answer Question  Select Best Answer

Explain What is POP3. How does is differ from POP?

ashishrs

 Profile Answers by ashishrs Questions by ashishrs

• Jun 8th, 2009

Post Office Protocol or POP is the protocol which describes the rules to fetch email messages from a server to local email client like outlook. POP3 is the third version and is standard now. There ar...

kumar.sikar

 Profile Answers by kumar.sikar Questions by kumar.sikar

• May 5th, 2009

POP stands for Post Office Protocol. This is used to describe how e-mail clients interact with mail servers. The POP3 Server is a type of mail server used for incoming mail. In simple terms, POP serve...

Answer Question  Select Best Answer

Explain What is Packet Switched, Cell Switched and Circuit Switched Technology?

genius_mjk

 Profile Answers by genius_mjk Questions by genius_mjk

• Mar 27th, 2010

Circuit Switching: In this type of switching the data which is being transmitted follow the path a particular dedicated path which is set during connection establishment.  Once the connection is ...

ersunitasingh

 Profile Answers by ersunitasingh Questions by ersunitasingh

• Jun 15th, 2009

When the packet is moved from one device to another device on a single network is known as packet switching.Circuit switching is provide a dedicated path between sender and receiver. But packet switching is provide different-2 path between sender and receiver, according to resources available.

Answer Question  Select Best Answer

A firewall is implemented in
1. Routers which Connect internet to internet2. Bridges used in an intranet3. Expensive modems4. User's application programs

Rahul

• Mar 20th, 2013

FIREWALL is used to Block the Malicious Means Suspicios Traffics in the Network.

Efren

 Profile Answers by Efren Questions by Efren

• May 5th, 2010

A firewall could be software or hardware. An example of software is the one that reside on your desktop operating systems like Windows XP. A hardware example is CISCO Pix firewall which is usually con...

Answer Question  Select Best Answer

You need to connect a token ring segment to an ethernet segment. Would you use a router, a brouter, or a bridge? Justify

khushimehta

 Profile Answers by khushimehta Questions by khushimehta

• Nov 20th, 2010

The Ethernet to Token Ring Bridge enables adevice with an Ethernet output to be connectedto a Token Ring network.

Jvachon

 Profile Answers by Jvachon Questions by Jvachon

• Jun 1st, 2010

Bridge

Answer Question  Select Best Answer

If the Server restarts often automatically? What could be the cause? How will you troubleshoot it?

bhagare

 Profile Answers by bhagare Questions by bhagare

• Dec 25th, 2012

It May Cause By Voltage Unequalness, may be any update installed need to restart,May be any Suspecious Entry,etc Virus/Malware ,Unathorise access,May be overheating,Check the Temp. of server room.

venkat

• May 1st, 2012

First we should have to check the prob from event viewer why the server got rebooted after that based on error log we can find out the resolution for that........

Answer Question  Select Best Answer

Assume there are 2 Domain Controllers, one has 3 roles and the second domain controller has 2 roles. If the Domain Controller with 3 roles goes down, Can the users who are under that domain controller login?

Rahul

• Mar 18th, 2013

Depends On Trust Relationship,Two Way Communication,Or One Way Communication,

hasiii

• Aug 10th, 2012

First the 2nd domain have to size the roles from the 1st one , after that users can access to the 2nd with full services

Answer Question  Select Best Answer

Rahul

• Mar 18th, 2013

Please Check the user ID & Password,Check The Lan Connection,If You Have a Domain Controller,Or Any Domain,
Please check the server is ON/OFF,Any Virus Iss,ue,Check the Workstation is in Correct Domain,Please check the you use correct the TCP/IP Setting.............. in Workstation.Like DNS.

Swati

• Oct 18th, 2011

May not remember the id or password right.

the password might have expired.

may not be choosing the right domain name at the log on screen.

computer might not be added to the n/w domain.

LAN n/w may be down.

Answer Question  Select Best Answer

When you enter the URL in the browser what it sends to the server ?
What is the path followed by the request sent by the Browser?

nathsambu

 Profile Answers by nathsambu Questions by nathsambu

• Dec 22nd, 2012

When we enter url, browser send ip address of url to the nearest ISP. Different ISP, this ip reach the DNS server. DNS server resolve the ip to name i.e. convert ip address to the web page and again send through the isp to the client

pavan.mustyala

 Profile Answers by pavan.mustyala Questions by pavan.mustyala

• May 17th, 2012

Browser sends a DNS query to the configured DNS server in the network. DNS server responds with the IP address. This is for name resolution. Network Connection is then established to the IP address re...

Answer Question  Select Best Answer

whats the use of higher-order bits in ip class addressing ? like for class "A" its 0
Class "b" its "10" and so on

neel rupani

• Sep 6th, 2018

Can you please explain how?

hemanshu trivedi

• Mar 1st, 2014

Higher order bits are use to identify the default class of the subnet

Answer Question  Select Best Answer

What is Load Balancing?

badshashorif

• May 10th, 2016

In computing, load balancing distributes workloads across multiple computing resources, such as computers, a computer cluster, network links, central processing units or disk drives. Load balancing ai...

rahul

• Dec 27th, 2015

If we have two internet lease line, while switching of traffic from one link to another

Answer Question  Select Best Answer