-
Low Level Formatting
Define Low Level Formatting?
Hamid Ali
- Jul 20th, 2011
Low-level formatting is the process of outlining the positions of the tracks and sectors on the hard disk, and writing the control structures that define where the tracks and sectors are. This is ofte...
-
Difference between *.ost and *.pst
What is the difference between *.ost and *.pst ? How does it work?
-
Windows XP Boot Options
What advance boot options are available for Windows XP?
-
Installing Printer
You are required to install a new printer on the Print Server what are your steps? Remember this will be a shared printer
komodosp
- May 25th, 2010
To share it on the network, in Control Panel / Printers and Faxes, you can right-click on it, and in the menu, click on Sharing
syed_nrp
- Apr 30th, 2009
First Start--->Control Panel--->Printers---->Add printer--->Local (or) Network
Printer--->Choose which brand printer and which one type of printer
(if it's needed drivers, push the driver CD in that PC)---->Select TYPE (LPT1 or USB)--->Finish.
It's ready to use printer. now printer is online. -
How can you view startup items
There are a couple of way to view and disable the items that start to the task pain... how would you go about doing it and give me the full path to get you there
pks07pro
- Jan 7th, 2010
To see the most start up item,Go to start>programm>start upTo make any changes, enable or disableGo to Run & type "msconfig"
-
How to take backup of emails on Outlook ?
shashi021
- Jun 23rd, 2011
Other way to take backup install PST SYNC (http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=9003)and set backup path for which pst want to be backup. it,s take much less time as using copying method.
anshulmehra_2007
- May 27th, 2011
log in with some user->delete files->tools->options->maintenance->store folder->copy the path->create new folder->paste the path to the new folder created->import->messages->MS outlook->select the user from where files is deleted->browse folder where the path was pasted->finish
-
Printing Problems
User sent a job but it is stuck in the local cue how can you delete it? name a couple ways
Read Best Answer
Editorial / Best Answer
syed_nrp- Member Since Apr-2008 | Jan 3rd, 2009
You first Install the proper printer driver install. Check that printer is on/off status. Then give a test page. The test page is not printing, go To
RUN-->services.msc
check printspooler?give stop and start. it's work fine
Dastagir Amir Hamaja
- Jun 18th, 2011
Go to start, setting , priter and faxes, there you will see your printer, double click that printer, you will find jobs you have printed, right click that job and try to delete it.If not deleting then restart printer spooler services. if not deleting then restart printer and pc.Thanks,Dastagir
syed_nrp
- Jan 3rd, 2009
You first Install the proper printer driver install. Check that printer is on/off status. Then give a test page. The test page is not printing, go To RUN-->services.msc check printspooler?give stop and start. it's work fine
-
Printers
How do you install a pre existing printer on a users desktop
pavankumarnagisetti
- May 21st, 2009
Go to Start-> Settings -> Printers and FaxesThis opens a new window now click on add a printer from right side panel.
Follow the steps.You can add normal as well network printer using this.rrsain
- Sep 13th, 2008
Go to control panel and then go to add hardware wizard After that read all the options carefully. When system requires software for that, insert the software CD otherwise system will install automatically. Restart the system, if it is not working, tell me, I will give you complete solution
-
FireWire Port
What is Firewire Port? What are its uses?
khurramjol
- Apr 21st, 2010
Firewire port is a form of Serial Port that make use of FireWire Technology to transfer data rapidly from one electronic device to another.FireWire port has the ability to interact with a number of&nb...
delhi.itsupport
- May 22nd, 2009
Firewire generally ports are genereally comes with laptop & apple desktop/laptops. You can connect various external hardware with this. e.g HDD, CDROM, Cameras etc. the transfer rate of a FireWire port can reach up to 400 Mbps.
-
Virtual Memory
How to improve virual memory of PC?
Dastagir Amir Hamaja
- Jun 18th, 2011
Go to system propert--> Advanced Tab--> click on setting of performance--> Advanced Tab--> Click on Change 0f Virtual memory--> now here you can increase virtual memoryDastagir
srbnew
- Feb 4th, 2011
Just right click on my computer icon select propertiesgo to advance go to performance select virtual memory select how much u want apply and click okthatz itz
-
Restore Windows XP
How to restore Windows XP in Command Mode.
ashi786
- Aug 18th, 2009
To start System Restore Windows XP first you create a system restore point by following steps:1. Click start and go help and support options on right hand side you see under pick a task options.2. C...
mahadeva83
- Apr 7th, 2009
To start System Restore using the Command prompt, follow these steps: Restart your computer, and then press and hold F8 during the initial startup to start your computer in safe mode with a Command pr...
-
PXE Use
What is PXE used for? What dependencies does it have to be useful?
sharmavivek096
- Jun 2nd, 2011
The Preboot eXecution Environment (PXE, also known as Pre-Execution Environment; sometimes pronounced "pixie") is an environment to boot computers using a network interface independently of data stora...
s.pandilwar
- Jan 28th, 2011
Preboot Execution Environment (PXE) :- When we are trying to boot system from network we need to enable PXE boot device from BIOS. It is helpful to install OS from network & it will pick IP address automaticaly. It is helpful in large network were we cannot install OS manualy.
-
Home folders
user has a home folder setup in AD when he logs in it maps the U drive which point to the share on the server.. he accidentally deleted it what is the fastest way to get it back from a command line?
khurramjol
- Apr 21st, 2010
Re-mapping will restore the home folder, and we can do in Command line as net use u: serverhome
-
LDAP on Outlook
What is the IP range in networking side? How do we troubleshoot Outlook? How do we configure ldap on Outlook?
Ushadavuluri
- Jul 30th, 2009
I am hoping I am submiting the correct answer. IP range in netwroking side is related to DHCP and Address pools. Ex: 192.168.0.10 to 192.168.0.200 -> Can be defined as address range allowed to dist...
Ushadavuluri
- Jul 29th, 2009
From Microsoft OutlookSelect: Tools->Account settings->AddressBook->New Address book-> select Internet Directory Service(LDAP) radio button-> Next step will take you to the window of se...
-
Set IP address from CMD Prompt
How do you set the IP address by using the command prompt?
arunbathery
- Aug 5th, 2010
There are Two ways to Set the IP address from CMD Prompt1. Go to start, select run, type CMD, and in CMD Prompt type the command C:>netsh interface ip set address name="Local A...
lila123
- May 28th, 2010
Set IP address from CMD prompt :type cmd in run type following command in sequence like IP address,Subnet mask, Default Getway, DNS,Wins, ect...exmpl : netsh interface ip set address name="...
-
What is the difference between LCD and TFT ?
shashi jadhav
- Sep 26th, 2008
A TFT monitor uses thin-film transistor technology. Nearly all LCD monitors today use TFT technology. The benefit of a TFT monitor is a separate, tiny transistor for each pixel on the display. Because...
SONY & RAVI
- Nov 22nd, 2007
LCD Means Liquid crystal display TFT means Thin Film Transistor Liquid Crystal Display.What I think you mean is Active and Passive matrix LCD panels. This is where there is a difference in price. A ty...
-
Enable or Disable Firewall
How would you Enable or Disable the Firewall in Windows XP?
adnanj85
- Feb 23rd, 2011
To enable Windows Firewall, follow these steps:Click Start, click Run, type Firewall.cpl, and then click OK.On the General tab, click On (recommended).Click OK.------------------------------To disable...
-
Install Operating System on more than 50 PC
How will you install Operating System in more than 50 PC at a time when the all Pcs having same configuration.
walker233
- Jan 14th, 2011
This depends on your operating system and target hardware.If you are deploying XP then you are bound by the hardware, and are required to make an image of the OS, using ghost or another image capture ...
-
Create an Email Account for a user already in AD
How would you create an email account for a user already in AD?
Anele Takane
- Jan 6th, 2011
If the user account has been created with a mailbox (mailbox enabled) you may follow ameetsaha's instructions, but if you need to create an email account (mailbox) you will have to go to your Active d...
ameetsaha
- Nov 5th, 2008
Open Micosoft Outlook if you are using office 2000, and click on "Tools" tab. Go to "Email Accounts". There you can find two option like Email and Directory. Click on "Add a n...
-
SMS Update
A PC did not receive an update from SMS. What steps would we take to resolve this?
Prabu2009
- Dec 17th, 2010
If SMS not updated in client system. 1. Need to check system getting IPaddress or not.2. Need to check system in domain or not3.Ensure that windows firewall should be off.Above reason SMS will not update to the client system.
Desktop Support Interview Questions
Read Best Answer
Ans