Set IP address from CMD Prompt

How do you set the IP address by using the command prompt?

Questions by dreamcast

Showing Answers 1 - 3 of 3 Answers

lila123

  • May 28th, 2010
 

Set IP address from CMD prompt :
type cmd in run
type following command in sequence like IP address,Subnet mask, Default Getway, DNS,Wins, ect...

exmpl :  netsh interface ip set address name="Local Area Connection" static 192.168.1.2 255.255.255.0 192.168.1.1


here is the 192.168.1.2 is IP
255.255.255.0 is subnet mask and
192.168.1.1 is default getway

By Amit J.

arunbathery

  • Aug 5th, 2010
 

There are Two ways to Set the IP address from CMD Prompt

1. Go to start, select run, type CMD, and in CMD Prompt type the command 

 C:>netsh interface ip set address name="Local Area Connection" source=dhcp

2.Go to start, select run, type CMD, and in CMD Prompt type the command 

C:>netsh interface ip set address local static 192.168.20.100 255.255.255.0 192.168.20.1 1

Give your answer:

If you think the above answer is not correct, Please select a reason and add your answer below.

 

Related Answered Questions

 

Related Open Questions