rakesh9770756364

 Profile Answers by rakesh9770756364 Questions by rakesh9770756364

• Jan 26th, 2012

NO junction in conducter

ARUL MOZHI

• Jan 22nd, 2012

No there is no junction in conductor. because its not semi-conductor. only semi-conductor contains junction

Answer Question  Select Best Answer

what are the application of different waveforms ? Explain how they are used in real time ?

waqas mehboob

• Mar 5th, 2012

Different waveforms have different applications.in some applications we require digital signal where we require only on or off state or discrete output but in some applications we require continuous o...

Answer Question  Select Best Answer

manasa

• Jun 1st, 2012

2m+2n

Raju Shrestha

• Feb 22nd, 2012

4. 2m+2n

Answer Question  Select Best Answer

What is the difference between inductance and resistance?

pradeep

• Jun 2nd, 2012

As resistance dissipates energy in the form of heat and
Inductor stores in the form of magnetic fields and hence
Two different energy is obtained by the two

ANUSHA MANEPALLI

• May 4th, 2012

RESISTANCE:It is the property of the material by which it opposes the flow of current through it. the resistance is denoted by r and measured in ohms.

INDUCTANCE: It is the element in which energy is stored in the form of electromagnetic field. The inductance is denoted by l and measured in Henry

Answer Question  Select Best Answer

Can a gas be used for conducting current?

sandeep yandamuri

• Jun 7th, 2012

Yes yes search "ATOMTRONICS" topic u can get total info how gases acts as a conductors and super conductors

vishnupriya

• Jun 7th, 2012

Yes, gases can be used provided they are in controlled condition

Answer Question  Select Best Answer

What is the difference Allen Bradley and Siemens plc

rashmikant

• Aug 5th, 2012

Allen bradley plc software can use for programming offline otherwise siemens software can`t use in offline only use in online mode

Answer Question  Select Best Answer

Viji Balakrishnan

• Sep 18th, 2012

3. set of tokens

Answer Question  Select Best Answer

viswanath

• Oct 3rd, 2012

If frequency of SMPF is reduced capacitor size is increased SMPF size also increased.

Answer Question  Select Best Answer

SUMANTH

• Dec 20th, 2012

For eg: code is 1101
this must be convert binary to gray then first 1 written as it is, 1 XOR 1
,1 XOR 0, 0 XOR 1.
then the gray code is 1 0 1 1

AKSA DAVID

• Oct 10th, 2011

For converting binary 2 gray code add three to the given binary no.

Answer Question  Select Best Answer

Design binary to gray code converter

tanuja

• Dec 22nd, 2012

First write 1 then 1 EXOR 1 then 1 EXOR 1 THEN 1 EXOR 1
so answer is 1000

praveen

• Nov 28th, 2012

Q: Where we use binary to Gray code and vice-versa...?

Answer Question  Select Best Answer

When a small amount of Cu is added to a Ni conductor, then the?a) Resistivity of Ni will decrease at all temperatures because Cu is better conductor than Nib) Residual resistivity of Ni at low temperatures will increase as Cu atoms acts as defect centersc) Resistivity of Ni will increase at all temperatures as Cu destroys the periodicity of Ni and acts as defectsd) Resistivity of Ni remains unaltered...

Lokesh M

 Profile Answers by Lokesh M Questions by Lokesh M

• Jan 3rd, 2013

Answer is C. If a small amount of Cu is added to Ni conductor, then resistivity of Ni will increase at all temperatures as Cu destroys the periodicity of Ni and acts as defects. According to Matthies...

Answer Question  Select Best Answer

what is Micro controller ? how to program Micro controller ?

irshad

• Jan 31st, 2013

Generally, microprocessor is a integrating the CPU on a single chip and it has some additional features like memory, registers,flags,pointer etc;but micro controller means it has same operation as microprocessor but with the different features like counters,ram,rom, etc.

kaliraja

• Nov 10th, 2012

Micro controller = micro processor + memory + interfacing features(ports) + additional features like counters.
A Micro controller can be directly connected to external devices. But a Processor needs a interface controller to connect with external input and output devices.

Answer Question  Select Best Answer

himanshi

• Feb 12th, 2013

Two ground terminals are provided to make the pin structure symmetrical o/w it requires only 39 pins.

hari krishna

• Jan 23rd, 2013

One is for the VCC & another one is clock issues

Answer Question  Select Best Answer

How to measure the insulation resistance for printed circuit boards ?

SANJIVAN

• Feb 22nd, 2013

Because opamp having high input impedance due to differential amplifier connected at the input side which is in the range of MEGA ohms and low output impedance due to power amplifier used at the outpu...

sumanth

• Dec 20th, 2012

Yes, by using the known impedance load at the output

Answer Question  Select Best Answer

How can we increase the gain and directivity of an antenna?

abid saleem

• Mar 18th, 2013

Antenna gain relates the intensity of an antenna in a given direction to the intensity that would be produced by a hypothetical ideal antenna that radiates equally in all directions (isotropically) an...

uzipereg

 Profile Answers by uzipereg Questions by uzipereg

• Jul 30th, 2011

Geometry, direction for example.

Answer Question  Select Best Answer

What is Memristor? How many modes it works? Also what is its Advantage? How It differ from others & why the name evolve? & What is its Uses?

Aaqib

• Mar 19th, 2013

Memristor is a contraction of Memory Resistor it means that its store the value based on amount of Charge Has Passed through on the applied previously applied voltage it was postulated by Leon Chua f...

Answer Question  Select Best Answer

Is RFID in developing stage?
WHat is scope in RFID?

Sahil

• Mar 22nd, 2013

RFID transponder is a special kind of radio transmitter and reciever. It is activated when it receives a signal of a specific kind. RFID transponders are present in smart cards and Radio Frequency Identification tags.

Answer Question  Select Best Answer

Nadim

• Mar 29th, 2013

I think you should do a project based on micro controller...if you have a knowledge of MATLAB then it will be an added advantage for you, you can make a project on that. The micro controller based projects are simple and easy to understand and even you can understand their programs easily..

purushottam

• Jan 2nd, 2007

I  am in BE(electronics engineer).I want to make a project,please suggest me a project that i do.I hope you will do a needfull help

Answer Question  Select Best Answer

Justin

• May 5th, 2013

No. Telecommunications equipment are sometimes scattered on a wide area (as one example), so you'd probably find the need to check for interference using a spectrum analyzer, etc.

Answer Question  Select Best Answer

Give examples of circuit protecting device apart from fuse, circuit beaker, relays, lighting arrestor, switch gears.

Justin

• May 5th, 2013

A zener diode, for smaller amounts of voltage regulation.

gorakh anna pandhre

• Apr 18th, 2013

Opoto-isolaters

Answer Question  Select Best Answer