adisgee

 Profile Answers by adisgee Questions by adisgee

• Aug 2nd, 2007

Hi,It is possible to automate mainframes, though not advisable, using WinRunner.WinRunner is designed a GUI interfacing tool and hence you will require some Terminal Software interface that interacts ...

Answer Question  Select Best Answer

adisgee

 Profile Answers by adisgee Questions by adisgee

• Aug 2nd, 2007

Could you provide some more information on what platform you are testing and what add-ins are being utilized?7.5 and 8.2 should ideally be compatible. Perhaps the answer might lie in some of the ...

Answer Question  Select Best Answer

adisgee

 Profile Answers by adisgee Questions by adisgee

• Aug 2nd, 2007

Hi,Connection to the Database can be established using an ODBC connection.Following are some simple steps that may help:1. Set up an ODBC DSNa. Go to the control panel and then double clikc on th...

Answer Question  Select Best Answer

adisgee

 Profile Answers by adisgee Questions by adisgee

• Aug 2nd, 2007

Hi,The concept of modular testing (referring to setting up a test automation framework), could be stated somewhat as follows:1. Assumption:a. There is an AUT - application/system under testb. You have...

Answer Question  Select Best Answer

Dhanasekar

• Jul 28th, 2007

[0-9]?[0-9]?[0-9]|[1][01][0-9][0-9]|1200

yoga3112

• Jan 31st, 2007

Assuming that 0 is also represented by 0000, then the Regular expression for 0 - 1200 would be ?![0-1][0-2][0-9][0-9]*?

Answer Question  Select Best Answer

The extension for a GUI Map file is “.gui”.

Alka

• Jul 13th, 2007

".gui"

vamsi.mogaraju

 Profile Answers by vamsi.mogaraju Questions by vamsi.mogaraju

• Jan 25th, 2006

THE EXTENSION OF GUI MAP FILE IS .GUI

Answer Question  Select Best Answer

Rose

• Jul 13th, 2007

In Context sensitive recoding, we take the help of GUI map file for getting the information about the objects.?In Analog recording, we are keeping all the information as tracks which contains all the information about the mouse movements, x,y coordinate details etc..

Answer Question  Select Best Answer

subahani.mahammad

• Jul 11th, 2007

Frame work is heart for automation. If we want to run?any application without using any GUI files, we should follow framework. We only prepare the framework. It's a combination of functions and scripts.

ravikunar

 Profile Answers by ravikunar Questions by ravikunar

• Dec 12th, 2006

winrunner frame work is nothing but winrunner testing process. 1. select the manual functionality test cases.2.Recieve stable build from devlopers.3. Recognise build using winrunner.4.convert manual f...

Answer Question  Select Best Answer

alex

• Jul 5th, 2007

You can write a function and save it as ".Lib".? You can then just compile it , just try run from top. for loading the function, go to the test properties and select test type as compiled module unde...

Answer Question  Select Best Answer

leena

• Jul 2nd, 2007

For getting unique user id use function get_time. e.g Name= "Raj"&get_time();and save the name in xls using following commandddt_set_row_value("Table name",rownumber,"Name...

Rahulku007

 Profile Answers by Rahulku007 Questions by Rahulku007

• Mar 28th, 2007

Good Question?.You can use the variable to capture the updated userid and use that variable in the script every time while login to application.I hope i answer your ? 

Answer Question  Select Best Answer

Krishna

• Jun 27th, 2007

DLL is similar to compiled module concept.Ex:consider abc.dll.INSTALL dll file in the respective environment and make the different tests or Test cases as compiled modules.Use Load and Unload functions to Test the activity.

Answer Question  Select Best Answer

When you work with WinRunner, you can choose to save your tests directly to your TestDirector database or while creating a test case in the TestDirector we can specify whether the script in automated or manual. And if it is automated script then TestDirector will build a skeleton for the script that can be later modified into one which could be used to test the AUT.

pravin08

 Profile Answers by pravin08 Questions by pravin08

• Jun 19th, 2007

We can integrate the automated scripts with TD by storing the script in TD database. We can run the scripts from TD by establishing connection with the TD using startup scripts.

nagarjuna

• Jun 7th, 2006

 We can integrate the win runner scripts to the test director my using Tools menu>connect test director

Answer Question  Select Best Answer

Following each test run, WinRunner displays the results in a report. The report details all the major events that occurred during the run, such as checkpoints, error messages, system messages, or user messages. If mismatches are detected at checkpoints during the test run, you can view the expected results and the actual results from the Test Results window. If a test run fails due to a defect...

pravin08

 Profile Answers by pravin08 Questions by pravin08

• Jun 19th, 2007

The test result contains information about the steps which are pass and failed due to defect in the AUT. If there is any mismatch in the checkpoints it is also reported as fail in the result. Based on this we can report the defects to QA manager through mail or report the defects in Quality Center.

nagarjuna

• Jun 7th, 2006

 By examining the results we send the reports

Answer Question  Select Best Answer

We run tests in Verify mode to test your application. Each time WinRunner encounters a checkpoint in the test script, it compares the current data of the application being tested to the expected data captured earlier. If any mismatches are found, WinRunner captures them as actual results.

pravin08

 Profile Answers by pravin08 Questions by pravin08

• Jun 19th, 2007

We can run the scripts in Verify mode inorder check the behaviour of the application under controlled condiitions. Verify mode is the default run mode.

logasiva

• Sep 23rd, 2005

If u want to run the script in winrunner,that time we will use run option verify mode is the default running mode.it compares the expected result toactual result.if any mismatchis there .it display fail result in red color&both are same it display the pass result in green color.

Answer Question  Select Best Answer

Yes, I have performed debugging of scripts. We can debug the script by executing the script in the debug mode. We can also debug script using the Step, Step Into, Step out functionalities provided by the WinRunner.

pravin08

 Profile Answers by pravin08 Questions by pravin08

• Jun 19th, 2007

Debugging of scripts can be performed using Step in, Step inout commands and break points. Add watch is used to check the value of the variables at runtime.

Divya

• Dec 1st, 2005

We can "Add watch" and see values of variable at different points by putting breakpoints. We use Step run to see result after each line of the script.

Answer Question  Select Best Answer

Following each test run, WinRunner displays the results in a report. The report details all the major events that occurred during the run, such as checkpoints, error messages, system messages, or user messages. If mismatches are detected at checkpoints during the test run, you can view the expected results and the actual results from the Test Results window.

pravin08

 Profile Answers by pravin08 Questions by pravin08

• Jun 19th, 2007

Winrunner doesnt evaluate results actually. It displays the system error messages, user messages and the test pass or fail criteria and the information about whether the checkpoint comparison passes or fails

Answer Question  Select Best Answer

N Reddy

• May 31st, 2007

Main test: Maintest calls the all scripts which are written for different modules including user defined functions and compiled modules. Briefly complete scripts called it is as maintest. ( some times...

Answer Question  Select Best Answer

Anil.Kumar

• May 30th, 2007

Class refers to type of object (or the logical description) and label refers to physical description of the object

Answer Question  Select Best Answer

We can handle varying window labels using regular expressions. WinRunner uses two “hidden” properties in order to use regular expression in an object’s physical description. These properties are regexp_label and regexp_MSW_class. i. The regexp_label property is used for windows only. It operates “behind the scenes” to insert a regular expression into a window’s...

arul

• May 15th, 2007

Latest Winrunner 9.2 is out recently in market. But most of features are same like WR 8.2 WR 9.2 supports IE 7.0, etc.Arul,Bangalore.

nagesh

• Dec 29th, 2006

Hai winrunner latest version is 8.2,QTP 9.0

Answer Question  Select Best Answer

karthik

• Apr 29th, 2006

This is a TSL statement used to load dll's for use in winrunner. Usually DLL's contain user defined functions that might needed regularly.ex:r=load_dll("dll-path");r=unload_dll("dll-path");There are 2...

Answer Question  Select Best Answer