sarada

• Jul 12th, 2006

How Boundary Value Analsys (BVA) can be use in interface testing?

masthanamma

• May 17th, 2006

Boundary value analysis is used to check the size and range of the particular object while testing manually. it is the upper limit and lower limits of variable data to test the object.

Answer Question  Select Best Answer

sudhakar2068

 Profile Answers by sudhakar2068 Questions by sudhakar2068

• Sep 12th, 2006

   gray testing:Test designed based on the knowledge of algorithm , internalstates, architectures, or other high -level descriptions of the program behavior. sudhakar kolla.If you have doubts can ask me.My Email:kollasudhakar2005@yahoo.co.in.My Number:09819859346. 

Shilpi Boosar

• Apr 25th, 2006

Glass box testing is distinguished from black box testing, in which the program is treated as a black box. You can't see into it. The tester (or programmer) feeds it input data, observes output data, ...

Answer Question  Select Best Answer

testing.siva

 Profile Answers by testing.siva Questions by testing.siva

• Jun 17th, 2008

Monkey testing is nothing but adhoc testing.. it is randomely tested without any formal test case..

sudhakar2068

 Profile Answers by sudhakar2068 Questions by sudhakar2068

• Sep 11th, 2006

Inter system testing:It is also known as Interoperatability testing. Test engineers are validating whether our application build in co existence with other software application to share common resourc...

Answer Question  Select Best Answer

nirmmal

 Profile Answers by nirmmal Questions by nirmmal

• Feb 11th, 2007

Adhoc testing is the testing done without following any test case design technique

sudhakar2068

 Profile Answers by sudhakar2068 Questions by sudhakar2068

• Sep 12th, 2006

 Ad hoc Testing :Testing carried out using no recognised test case design technique.Gorilla Testing:Testing one particular module,functionality heavily.  sudhakar kolla.If you have doubts can ask me.My Email:kollasudhakar2005@yahoo.co.in.My Number:09819859346. 

Answer Question  Select Best Answer

radha krishna

• Mar 25th, 2007

Reliability testing is application build or s/w allowes you to change from abnormal situation to normal situation here abnormal means?database disconnected, serverdown, major data creshed in the application

sravanthi

• Feb 27th, 2007

Reliability is ability of s/w product to perform its required functions under stated conditions for specified time and process of testing to detemine the reliablity of s/w product is reliability testing

Answer Question  Select Best Answer

srisandy

 Profile Answers by srisandy Questions by srisandy

• Nov 27th, 2007

BRD is a high level documention (means tables) and SRS/FRS is Low level documention (use case diagrams).

csr

• Jan 22nd, 2007

As of my knowledgeBRD is the Buisness Requirement Documet/FRS is the Functional Requirement Specification------In intial phase of SDLC ,requirements gathering from customer and prepares the ...

Answer Question  Select Best Answer

lina

• Mar 20th, 2007

Hi Friends,No damage testing is nothing but it is Positive testing.. This means we execute the test case only to check the funtionality is full filled or?not according to the requirements.Testers will have no intention of finding out?the bug....

koina

• Mar 1st, 2007

A kind of testing who's main intension is to pass the test. Or we can say that positive testing is no damage testing.

Answer Question  Select Best Answer

chandramohen

 Profile Answers by chandramohen Questions by chandramohen

• Dec 7th, 2007

Can u explain in detail

prateeti

• Aug 21st, 2007

The SCM processes are1.Software Configuration Identification.2.Software Configuration Control.3.Software Configuration Status Accounting.4.Software Configuration Auditing & Validation.5.Software Release Management & Delivery.

Answer Question  Select Best Answer

mathan_vel

 Profile Answers by mathan_vel Questions by mathan_vel

• Mar 2nd, 2010

Business Rules is nothing but, some conditions given for the requirement or changes in the application flow. below i gave an example for the business Rules.For a Web Application Prohm Business Analyst...

karunachennai

 Profile Answers by karunachennai Questions by karunachennai

• May 31st, 2008

It means following the standard business  procedures within the company limit. Before applying the business rules should be done the forecasting accurately.

Answer Question  Select Best Answer

bgopal_5

 Profile Answers by bgopal_5 Questions by bgopal_5

• May 23rd, 2008

Number of defects found in single module is know as defect density.

raghu

• Sep 24th, 2007

Defect Density=Total No. of Defects/Total Defects in module,functional

Answer Question  Select Best Answer

What type of testing come under this?explain with an example

neha

• Mar 25th, 2019

Control structure testing Control structure testing is a group of white-box testing methods. CONDITION TESTING It is a test case design method. It works on logical conditions in program...

satish

• Nov 22nd, 2007

Control structure testing is a part of white box testing. it includes following methods:1) Condition testing2) Loop testing3) Data validation testing.4) Branch testing/Path testing.

Answer Question  Select Best Answer

Where do you use this type of testing

emmily

 Profile Answers by emmily Questions by emmily

• Sep 10th, 2010

A third stage of software testing sometimes peformed after beta testing but before commercial release. In gamma testing, the software is believed to be complete and free of errors, but the manuals and packaging may not yet be in final form.

udaykanth

 Profile Answers by udaykanth Questions by udaykanth

• Aug 24th, 2010

Saritha for your information there are alpha testing and beta testing but there is no gamma testing at all.

Answer Question  Select Best Answer

Tiger2k

 Profile Answers by Tiger2k Questions by Tiger2k

• Mar 3rd, 2008

V model is one of the type of sdlc model where validation and verification happens at same time.Developement and testing activites are conducted simuntanelously in this phase.One of the famous and widely used sdlc model

preetikalra

 Profile Answers by preetikalra Questions by preetikalra

• Dec 28th, 2007

V-model explains about the steps to be followed while testing.The steps are1. Requirement Analysis2. System Design3. Program Design4. Implementaion5. Unit testing6. Integration testing7. System testingEach phase has corresponding test or validation counterpart.

Answer Question  Select Best Answer

What does PPQA process area exactly do?

Manvi Arora

 Profile Answers by Manvi Arora Questions by Manvi Arora

• Mar 27th, 2008

PPQA (Process and Product Quality Assurance) are intended to achieve the following objectives:1.To determine to what extent the quality system: a.Achieves its objectives.  b.Conforms to the requi...

Manvi Arora

 Profile Answers by Manvi Arora Questions by Manvi Arora

• Mar 26th, 2008

PPQA stands for Process and Product Quality Assurance. PPQA are intended to achieve the following objectives: 1. To determine to what extent the quality system:       ...

Answer Question  Select Best Answer

What is Release Notes?What is Final Candidate?

mahe_sh26

 Profile Answers by mahe_sh26 Questions by mahe_sh26

• Jun 29th, 2010

Generally Release notes is Derived from SRS Documnet, Release notes will be prepared by Release Manager. It Contains the CR Production , Deffered IR, IR Production In the Particular Release. &nbs...

sunithachenna

 Profile Answers by sunithachenna Questions by sunithachenna

• Apr 1st, 2008

Release notes is the one where it contains the summary of Testing performmed in the particular build like Functionalities that can be tested,Functionalities that cannot be tested, Defects that are fixed, known issues etc...

Answer Question  Select Best Answer

Explain Physical Configuration Audit (PCA) and Functional Configuration Audit (FCA)

Hari

• Nov 8th, 2012

@mnsp

Can u give few examples on PCA and FCA findings with some work products (PMP, RMP, Builds, Test cases)?

mnsp

• Jan 4th, 2012

Starting from configuration audits, then getting into physical and functional configuration audits. Primarily purpose of Configuration audit is to verify the "status" of the configuration items that...

Answer Question  Select Best Answer

What is meant by "Scripted Testing" ?

Kronus

 Profile Answers by Kronus Questions by Kronus

• Aug 20th, 2010

In my view, scripted testing might be referring to automation testing. This mean you are writing a script (Perl, Java etc) to test you feature, instead of carrying out test on the product manually. 

anujsingh.jadon

 Profile Answers by anujsingh.jadon Questions by anujsingh.jadon

• Apr 10th, 2010

There is no word like scripted testing. But in testing, scripted documents like test plan, tests case, design document, SRS etc is necessarary in order to avoid ambuiguity and redundancy of work.

Answer Question  Select Best Answer

What is exhaustive and non-exhaustive testing?

ashishks

 Profile Answers by ashishks Questions by ashishks

• Jul 28th, 2009

Exhaustive testing- Testing all possible scenarios(all permutation and combination of functionalities) is called exhaustive testing.Non-Exhaustive testing: Testing only postive & negative scenario...

goksn

 Profile Answers by goksn Questions by goksn

• Jul 23rd, 2009

IMHO, Exhaustive testing, testing all the possible test cases (which is in many cases not possible due to time and budget factors)Non-exhaustive testing is executing the chosen test cases based on prirotiy. This is normally followed in many testing projects.

Answer Question  Select Best Answer

What to you mean by Endurance Testing? What its also called?

goksn

 Profile Answers by goksn Questions by goksn

• Jul 12th, 2009

Checks for memory leaks or other problems that may occur with prolonged execution.

deven_a76

 Profile Answers by deven_a76 Questions by deven_a76

• Jun 21st, 2009

Endurance testing is also known as Load Testing. It isbasically used to check the memory leaks.

Answer Question  Select Best Answer

A sequence of one or more consecutive, executable statements containing no branches.

Bindu Dey

 Profile Answers by Bindu Dey Questions by Bindu Dey

• Apr 16th, 2007

HiBasic Block:  is code that has one entry point (i.e., no code within it is the destination of a jump instruction), one exit point and no jump instructions contained within it. The start of a ba...

Sujatars

 Profile Answers by Sujatars Questions by Sujatars

• Mar 20th, 2007

Basic Block: A sequence of one or more consecutive, executable statements containing no branches

Answer Question  Select Best Answer