-
Prepare 10 test cases for the above scenario based on minimum balance and withdraw amount input ?
When you try to withdraw money from an ATM machine, the minimum balance is 5000 prior to the withdraw.At any time user can withdraw an amount 500 only Assume remaining conditions are working.
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 16th, 2010
Test Cases :
1. To check whether the card is valid
2. To check whether account is valid
3.To check whether the card is working only with the correct pin number
4.To check whether the card is directed to work with appropriate a/c
5.To check whether the card has miniumum balance of above 5000
6.To check whether the card holder can get the amount when thereshalinimohan
- Jan 12th, 2011
Try to input an amount more than 5000 and verify that atm shows the required error message Try to input an amount equal to or less than 5000 and verify that user is able to withdraw the entered amoun...
saravanan123
- Jul 16th, 2010
Test Cases :1. To check whether the card is valid2. To check whether account is valid3.To check whether the card is working only with the correct pin number4.To check whether the card is directe...
-
Write Test cases for Traffic Signal
Read Best Answer
Editorial / Best Answer
sarvesh4u- Member Since Apr-2008 | May 12th, 2010
Test cases on the Traffc Signal
1- There should be three signal light (Red,Yellow,Green) also there should be provision to have a left and right arrow signal.
2- At a time only one stright and aadjacent left direction should have green signal on.
3- There should be duration of 5 second after completation of Green signal.
4- At the time of Green signal the Zebra cross signal should be red.
5- There should a provision when all the signal should be closed and only zebra crossing is allowed.
6- To make sure the visibility of the signal the height of the signal pole should be grater than 10 feet.
7- There should be provision to allow maual control if it is not a digitally controled.
8- Each and every signal should have time meter in the decreasing order.
9- There should be power backup provided to the signal.
10- The intensity of the signal light should be brighter and should not be dull.
mathan_vel
- Oct 1st, 2010
Test cases for T-Signal1. Ensure that T-signal is working fine on Power.2. Ensure that all 3 colors are glowing at frequent time.3. Ensure Red light should glow after the yellow light off.4. Ensure th...
sarvesh4u
- May 12th, 2010
Test cases on the Traffc Signal1- There should be three signal light (Red,Yellow,Green) also there should be provision to have a left and right arrow signal.2- At a time only one stright and aadjacent...
-
what is a test case? how to write the general test cases on PEN, PAPER, TABLE, FAN , ETC.
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 20th, 2010
Test case is nothing but writing the test description,test data,test actions ,actual and expected output these will be noted there based upon the requirements
Test cases for Table:
1.To check whether the table should be flat
2.To check whether the table has got good surface to keep the books over it to read and write
3.To check whether the table has enough strength
4.To check whether the table is very comfort for all the peoples to do their works
5.To check whether the table should not be more height
6.To check whether should be easily be taken or to move
7.To check whether the table should be easily folded and kept any where
Test Case for White Paper
1.Check it is unruled
2.Check whether nothing has been written on to it
3.Check whether it is pure white
4.Check whether it is not dared inside in any corner
5.Check it is ready to write
6.Check both sides are empty
7.Check it is not in wet condition
8.Check it is very neat
Test Case for Pen
1.Check whether the pen is writing in which colour
2.Check whether we can see the liquid from outside
3.Check whether the pen is ballpoint or ink
4.Check whether the pen is compact at the holding area
5.Check whether the pen can write in different conditon
6.Check whether the pen can write if it writes in ulta i.e if we sign or write or anything by keeping in the wall and writing
7.Check whether the pen is very attractive
8.Check whether the pen is very good in writing i.e nib area
Test cases for Fan:
1.To check whether the fan should have on off button
2.To check whether the fan should have at least 2 wings
3.To check whether the fan should give long life
4.To check whether the fan should give good speed of air
5.To check whether the fan`s speed can be controlled by using the buttons
6.To check whether the fan should run in all environmentsaravanan123
- Jul 20th, 2010
Test case is nothing but writing the test description,test data,test actions ,actual and expected output these will be noted there based upon the requirements Test cases for Table: 1.To check whether ...
raj29
- Jun 8th, 2008
To test the INK pen the following prerequisites should be there 1. cap 2. The pen should be divided into 2 part. The top to hold the nib and the bottom to hold the ink. 3. The parts cap, top of the...
-
Can any one give me BVA and Equivalence partitioning Testcases for >18 and
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Jan 7th, 2010
Equivalence partitioning and boundary value analysis to test a text box and accepts values greater than 18 and less than 21. The range of acceptable input is then 19 an 20. This isn't much of a range. In this example, there is no need to perform equivalence class partitioning because all numbers in the class will be used to conduct boundary value analysis.
The test values are:
18 ( min - 1 )
19 ( min )
20 ( max )
21 ( max + 1 ) -
Write test cases for forget password functionality.
By clicking forget password , request for password security questions and send new password.
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 20th, 2010
Test Cases For Forget Password :
1.To check whether when we select the forgot password link it is directing to forgot password link page.
2.To check whether in that page it must ask for alternative email id to send the link
3.To check whether the link has sent to the mail to which the user has provided
4.To check whether the link can be used once once
5.To check whether when the user using the link for more than one time it should be dissolved
6.To check whether the user opens the link it should ask the security question same at the time he registered
7.To check whether the answer given by the user at that time and he has given while at the time of registering must be the same
8.To check whether the user gives any wrong answer then it must ask for the user to wait and to get more details to get his password
9.To check whether the user gives the correct answer then the link should move to new password page
10.To check whether the user enters the new password and retype the password both should match untill new password should not be setted
11.To check whether once the password is setted then the account should ask the user to move to his account or exit
12.To check whether the user now logins with new password it is workingsaravanan123
- Jul 20th, 2010
Test Cases For Forget Password : 1.To check whether when we select the forgot password link it is directing to forgot password link page. 2.To check whether in that page it must ask for alternative em...
saravanan123
- Jul 19th, 2010
Test Cases for forget password : 1. Check whether when we click the forgot password link it must directs to forgot password link page2.Check whether it must ask the email to send the forgot password l...
-
What are the test cases for ceiling fan and would you perform the stress testing on it?
Read Best Answer
Editorial / Best Answer
mathan_vel- Member Since Dec-2007 | Aug 18th, 2009
1. Check the Ceiling Fan company (Logo, branded)
2. Check the Ceiling Fan Appearance and color.
3. Check that the Ceiling Fan is exactly mounted in Wall.
4. Check that the Blades are fitted in the Fan.
5. Check that the Fan is run on Switch on
6. Check that the Fan should stop run on Switch off.
7. Check that the air circulation up on the Regulator speed.
Stress Test Case:
1. Check the Ceiling fan running at Voltage problem.
2. Check the Ceilling fan life by run certain hour per day.
3. Check the Ceiling fan sound after several hour of runsaravanan123
- Jul 20th, 2010
Test cases for Ceiling fan :1.TO check whether it has got more than 2 wings2.To check whether the fan is connected to current3.To check whether the fan is rotating in single direction everytime4.To check whether the fan is working based on the speed
mathan_vel
- Aug 18th, 2009
1. Check the Ceiling Fan company (Logo, branded)2. Check the Ceiling Fan Appearance and color.3. Check that the Ceiling Fan is exactly mounted in Wall.4. Check that the Blades are fitted in the Fan.5....
-
How do you create a test data for testing purpose
How do you create a test data and how many methods are available?
Read Best Answer
Editorial / Best Answer
mathan_vel- Member Since Dec-2007 | Aug 18th, 2009
Test Data are data which have been specifically identified for use in tests, typically of a computer program. Some data may be used in a confirmatory way, typically to verify that a given set of input to a given function produces some expected result. Other data may be used in order to challenge the ability of the program to respond to unusual, extreme, exceptional, or unexpected input. Test data may be produced in a focused or systematic way (as is typically the case in domain testing), or by using other, less-focused approaches (as is typically the case in high-volume randomized automated tests). Test data may be produced by the tester, or by a program or function that aids the tester. Test data may be recorded for re-use, or used once and then forgotten.
Domain testing is a family of test techniques that focus on the test data. This might include identifying common or critical inputs, representatives of a particular equivalence class model, values that might appear at the boundaries between one equivalence class and another, outrageous values that should be rejected by the program, combinations of inputs, or inputs that might drive the product towards a particular set of outputs.
saravanan123
- Jul 20th, 2010
We are creating a test data based upon what output we need to get based upon what input we have to give.this also depends upon the requirementsThis may be different to each project
mathan_vel
- Aug 18th, 2009
Test Data are data which have been specifically identified for use in tests, typically of a computer program. Some data may be used in a confirmatory way, typically to verify that a given set of input...
-
Write test case for Find and Replace funcationality?
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 20th, 2010
Test Cases:
1.To check whether find and replace options should be there
2.To check whether when we give some word to find and replace it must user whether to change for the whole or only particular word
3.To check whether shortcut key is working properly
4.To check whether all the words are replaced correctly5.To check whenever the user clicks find option or replace option immediately find and replace tab should be open6.To check whether when we select for more option it must display with more options7.To check whether if there are more than one page then we must click for goto and we give the page number it must work as per the dateils in that pagesaravanan123
- Jul 20th, 2010
Test Cases:1.To check whether find and replace options should be there2.To check whether when we give some word to find and replace it must user whether to change for the whole or ...
-
How to write requirements and test cases for sign up yahoo new user account .
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 20th, 2010
1.Check whether firstname field accept only alphabets
2.Check whether last name field accept only alphabets
3.Check firstname last name cannot accept other than alphabets - negative
4.Check the login name field accept only alphabets numerics and special characters except dot.
5.Check whether the desired login name is created only when it displays specific name is available.
6.Check whether desired login name cannot be created with existing login name - negative
7.Check password accept more than 8 characters
8.Check password cannot accept less than 8 characters - negative
9.Check the password and re-enter password field be the matched
10.Check it display a message when password and re-enter password mismatches - negative 11.Check whether you can view the security question
12.Check whether answer field cannot be null.
13.Verify whether secondary mail field entered with valid id
14.Verify whether your location is present in the location field
15.Verify whether the captcha entered and available is correct.
16.Check every time you refresh or selecting i accept it display a new captcha
17.Check captcha be unique
18.Check captcha is case sensitive
19.Check when i accept is selected it moves to next page
20.Check when any required field is not entered or entered with the wrong values it display a message with red color fontsaravanan123
- Jul 20th, 2010
1.Check whether firstname field accept only alphabets 2.Check whether last name field accept only alphabets 3.Check firstname last name cannot accept other than alphabets - negative 4.Check the login ...
-
Where TRACEABILITY MATRIX's are used in projects at real time?
This question was asked to me in the interview.. please answer anyone and clear my doubt friends
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Jan 7th, 2010
The most practical application of a traceability matrix is to map requirements to test cases and then verify that all requirements have been adequately covered by test cases. The is done after all of the test cases have been prepared.
saravanan123
- Jul 20th, 2010
Traceabilbity Matrix are used inprojects at the time of acceptance testing
kurtz182
- Jan 7th, 2010
The most practical application of a traceability matrix is to map requirements to test cases and then verify that all requirements have been adequately covered by test cases. The is done after all of the test cases have been prepared.
-
How do you ensure that there are no duplicate test cases?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 13th, 2009
1) Perform a backward trace from the test cases to requirements and place all testcases that map to the same requirement in a contiguous grouping. Examine all test cases in each grouping to verify they test something unique.
2) Conduct peer reviews of test cases and ask reviewers to ensure that there are no duplicate test cases.
3) Use the buddy system to have testers execute one another's test cases. A fresh look at the test cases can often catch test case redundancies.kurtz182
- Dec 13th, 2009
1) Perform a backward trace from the test cases to requirements and place all testcases that map to the same requirement in a contiguous grouping. Examine all test cases in each grouping to veri...
-
What are Testcases for date field validationIt has calender provided beside textbox (we need to select date from text box)
saravanan123
- Jul 13th, 2010
Test Cases :1. To check whether the cursor moves to the date field text box itself the calender should display2.to check when the user selects the date in calender it must display the same date in date fields3.To check whether the user cannot select more than the system date
Archana
- Oct 5th, 2007
1.Should accept dates in any format as decided ie dd/mm/yy or mm/dd/yy or yyyy(ex:1983). Client machine has some format set in regional settings.2.If the date field is system driven then t...
-
Define equivalent partitions for a text field which accepts maximum 20 alphabetical chars and hyphens "-".
ssaradha85
- Jan 25th, 2010
1 ) Chk by enterning empty string in the text field2 ) Chk by enterning special char other than hyphen3 ) Chk by enterning a alphabetical chars with a max of 20 4 ) Chk by enterning a hyphe...
kurtz182
- Dec 26th, 2009
Enter the following:- no alpha chars or hyphens- 1 alpha char- 1 hyphen- 1 alpha char and 1 hyphen- combination of (max - 1) alpha chars and hyphens- combination of max alpha chars and hyphens- c...
-
Write test cases for sending email from cell phone.
kurtz182
- Dec 26th, 2009
Here are a few sample test cases:APPLICATION PAGE1) mobile email is an option on this page2) mobile email icon image meets spec3) mobile email icon is located in proper location on page4) can place fo...
saravanan123
- Aug 13th, 2009
1.Check you have got enough balance and battery on you cell 2.Check whether you GPRs activation is working fast 3.Check whether if you select gprs in your phone it connects to net 4.Check whether ...
-
How to write test case on compose box in email
goksn
- Sep 23rd, 2009
In high level, I can see the coverage asPlatform coverage-> From where the emails are triggered like from email client (different email clients like Thunderbird,MS Outlook express, Opera Mail, Appl...
saravanan123
- Jul 20th, 2009
Test Case forCompose Mail1.Check whether when you give yahoomail and press enter in firefox it moves to login page2.Verify whether it doesn`t moves give the url name correctly3.Check whether you are e...
-
CAPTCHA's
Write testcase for CAPTCHA's?
rajmohan23
- Aug 22nd, 2009
To check whether the captcha field is defaultly present To check whether the captcha filed only in alphabets and in numbers To check whether the captcha filed is changed when the captcha is entered ...
mathan_vel
- Aug 12th, 2009
Test Cases for CAPTCHA1. Ensure that the CAPTCHA code screen should be viewable.2. Ensure that the CAPTCHA code should be in Image format.3. Ensure that the CAPTCHA code should be reusable.(able to ge...
-
How would you test a COTS integration?
What are the test factors and test design?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 17th, 2009
Human factors are very important in testing COTS applications:
1) Communicate with the vendor
2) Get Information for Test Planning
3) Get Support for Testing
4) Get Cooperation for Integration Testing
5) Get Customer and User Input and Assistance in Testing
The phases of testing a COTS application:1) Understand the COTS application and how it will be used
- Determine test integration 'glue'
2) Develop a COTS test strategy
- objectives
- understand general COTS risks
- identify risks unique to your application
3) Plan for testing COTS application
- Map planning activities to COTS life cycle
- Gather required input and entry criteria
- Determine what needs to be verified
- Determine what needs to be validated
- Create a test plan
- Create test cases; test scenarios; test scripts
- Add traceability to tests
4) Test execution on COTS application
- build the environment (hardware, software, tools, data, and verify integration feasibility)
- train testers
- Perform tests
- record defects
- verify results
- perform regression tests
5) Analyze and report results of COTS testing
- evaluate defects
- make sense of information to improve processes
> requirements
> acquisition
> integration
> customization
> testing
> implementation
kurtz182
- Dec 17th, 2009
Human factors are very important in testing COTS applications: 1) Communicate with the vendor2) Get Information for Test Planning3) Get Support for Testing4) Get Cooperation for Integration Test...
Test Cases Interview Questions
Read Best Answer
Ans