-
-
Buttons Functional test cases
We have 3 buttons (submit,reset,cancel) .. what are the functional test cases of these three buttons..
Rishabh
- Jul 28th, 2015
On click submit button if fields are properly field then must show the next page.
On click reset button data of field must be erased.
On click cancel back to previous page.BNP1990
- Jul 14th, 2015
Generic Test case will be : A) For Submit Button. 1) Check Whether Button is enable or not. 2)On Click Submit Button Data on Form should hit either DB or Redirect to other page based on requirement...
-
Testcase writing for radio button and check box
How to write testcases for radio button and check box please can you explain with some example.......
bhogavalli srilakshmi
- Dec 9th, 2013
Hi Saket srinivastava, As a part of testing we are having some scenarios for check boxes. So those also very important to test the application. Actually i faced that kind of situations in my organiza...
surya
- Mar 25th, 2013
See whether with out selecting the check box we can submit or not i.e., to test whether it is a mandatory field or not.
-
Test Case for Integer Addition
Write test cases for X+Y=20; Where X,Y are integers
Manhad khan Mohammed
- Feb 21st, 2016
Can Anyone specify with some values.
let x=0, y=-7 expected =-7 ... something like thisparularora
- Oct 6th, 2015
- Enter X as 0 Y as integer result should be integer - Enter Y as 0 X as integer result should be integer - Enter X as negative number and Y as positive number > 0 result should be integer. - Enter x ...
-
Test Cases for GPS
What are the Test Cases for GPS?
-
How do you test a television?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 12th, 2009
1) adherence to brand
2) packaging
3) operating manual
4) set-up
5) menu navigation
6) parental controls
7) visual performance adjustments
8) audio performance adjustments
9) visual modes (ex: picture in picture)
10) channel selection and sensitivity
11) ease of use
12) power supply
13) visual quality and adherence to standards
14) audio quality and adherence to standards
15) stress
16) environmental factors
17) interfaces
- remote control
- local antennae
- cable boxRakesh Kumar Singh
- Jul 29th, 2011
1.Check the connection of wire and current flow. 2.Check that input voltage 230v /50 Hz and it should display the clear picture after providing the supply. 3.Power should be on within specified period...
kurtz182
- Dec 12th, 2009
1) adherence to brand2) packaging3) operating manual4) set-up5) menu navigation6) parental controls7) visual performance adjustments8) audio performance adjustments9) visual modes (ex: picture in pict...
-
How to write testcases for n factorial? How many test cases will we get?
sai kiran reddy
- Jun 2nd, 2016
Factorial of a given number should not be negative numbers, decimal point numbers, alpha characters, special characters and if it is function, it takes only one parameter.
kurtz182
- Dec 28th, 2009
Factorials are represented by n! Examples: 3! = 1 * 2 * 3 = 6 4! = 1 * 2 * 3 * 4 = 24 &n...
-
Pls Suggest the test cases on Traffic Signals
saravanan123
- Jul 14th, 2010
Test cases for T-Signal 1.check whether it has got 3 colour lights 2.check whether there must be atleast 2 colour light 3.check whether it has red colour and green colour 4.check whether at a time bot...
kurtz182
- Dec 28th, 2009
My answer assumes two traffic lights work in tandem with one another in a cross-section each having two lanes where the center lanes are the left turn lanes. To keep things simple, I will use the...
-
How do we ensure the requirement coverage other than Tracability Matrix ..this was the interview question
saravanan123
- Jul 14th, 2010
Work with the application and see what really the work environment people need based upon check whether you have covered all the requirements
kurtz182
- Dec 16th, 2009
How can you ensure requirement coverage other than using the Traceability Matrix? One way is to conduct peer reviews with testers reviewing one another's test suites. Another is to fac...
-
1.Write Test cases for ATM with giving high priority?2.How to test this triangle whose co-ordinate is (x1,y1),(X2, y2),(X3, y3)
saravanan123
- Jul 14th, 2010
Test Cases For ATM in Bank 1. Check Whether ATM is accepting your inserted card 2. Check whether ATM displays to Welcome screen when the card is valid 3. Check whether ATM is displays any 3 lan...
kurtz182
- Dec 16th, 2009
user interface + screens have proper format and text + buttons correspond to proper items on screens + keypad entries are properly displayed + can backs...
-
How to write tets cases for electric bulb please explain me in brief
Ambili Tester
- Dec 16th, 2011
With bulb:
filament is not broken.
holder nibs are available.
With holder:
fits?
removable?
falling?
With switch:
glows when ON
not glowing when OFF
glows as per the volt.
With power:
performance when no power?
performance with low voltage?
perfromance when switch is turned oN/off frequently?saravanan123
- Jul 21st, 2009
Test Cases For Electric Bulb1.Check whether the bulb is fitted to the bulb attacher2.Check whether the bulb glows when there is power supply3.Check whether the light vision be very high4.Check it is h...
-
What are the classifications of test cases
kurtz182
- Dec 26th, 2009
You can classify test cases any way you want to. They can be classified as formal or informal. They can be classified as functional or nonfunctional. I classify test cases by folder ...
mathan_vel
- Aug 19th, 2009
1. Formal Test Cases2. Informal Test Cases1.Formal Test CasesIn order to fully test that all the requirements of an application are met, there must be at least two test cases for each requirement: one...
-
-
How do you ensure that there are no duplicate test cases?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 13th, 2009
1) Perform a backward trace from the test cases to requirements and place all testcases that map to the same requirement in a contiguous grouping. Examine all test cases in each grouping to verify they test something unique.
2) Conduct peer reviews of test cases and ask reviewers to ensure that there are no duplicate test cases.
3) Use the buddy system to have testers execute one another's test cases. A fresh look at the test cases can often catch test case redundancies.kurtz182
- Dec 13th, 2009
1) Perform a backward trace from the test cases to requirements and place all testcases that map to the same requirement in a contiguous grouping. Examine all test cases in each grouping to veri...
-
Where TRACEABILITY MATRIX's are used in projects at real time?
This question was asked to me in the interview.. please answer anyone and clear my doubt friends
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Jan 7th, 2010
The most practical application of a traceability matrix is to map requirements to test cases and then verify that all requirements have been adequately covered by test cases. The is done after all of the test cases have been prepared.
saravanan123
- Jul 20th, 2010
Traceabilbity Matrix are used inprojects at the time of acceptance testing
kurtz182
- Jan 7th, 2010
The most practical application of a traceability matrix is to map requirements to test cases and then verify that all requirements have been adequately covered by test cases. The is done after all of the test cases have been prepared.
-
What are the test cases for ceiling fan and would you perform the stress testing on it?
Read Best Answer
Editorial / Best Answer
mathan_vel- Member Since Dec-2007 | Aug 18th, 2009
1. Check the Ceiling Fan company (Logo, branded)
2. Check the Ceiling Fan Appearance and color.
3. Check that the Ceiling Fan is exactly mounted in Wall.
4. Check that the Blades are fitted in the Fan.
5. Check that the Fan is run on Switch on
6. Check that the Fan should stop run on Switch off.
7. Check that the air circulation up on the Regulator speed.
Stress Test Case:
1. Check the Ceiling fan running at Voltage problem.
2. Check the Ceilling fan life by run certain hour per day.
3. Check the Ceiling fan sound after several hour of runsaravanan123
- Jul 20th, 2010
Test cases for Ceiling fan :1.TO check whether it has got more than 2 wings2.To check whether the fan is connected to current3.To check whether the fan is rotating in single direction everytime4.To check whether the fan is working based on the speed
mathan_vel
- Aug 18th, 2009
1. Check the Ceiling Fan company (Logo, branded)2. Check the Ceiling Fan Appearance and color.3. Check that the Ceiling Fan is exactly mounted in Wall.4. Check that the Blades are fitted in the Fan.5....
-
what is a test case? how to write the general test cases on PEN, PAPER, TABLE, FAN , ETC.
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 20th, 2010
Test case is nothing but writing the test description,test data,test actions ,actual and expected output these will be noted there based upon the requirements
Test cases for Table:
1.To check whether the table should be flat
2.To check whether the table has got good surface to keep the books over it to read and write
3.To check whether the table has enough strength
4.To check whether the table is very comfort for all the peoples to do their works
5.To check whether the table should not be more height
6.To check whether should be easily be taken or to move
7.To check whether the table should be easily folded and kept any where
Test Case for White Paper
1.Check it is unruled
2.Check whether nothing has been written on to it
3.Check whether it is pure white
4.Check whether it is not dared inside in any corner
5.Check it is ready to write
6.Check both sides are empty
7.Check it is not in wet condition
8.Check it is very neat
Test Case for Pen
1.Check whether the pen is writing in which colour
2.Check whether we can see the liquid from outside
3.Check whether the pen is ballpoint or ink
4.Check whether the pen is compact at the holding area
5.Check whether the pen can write in different conditon
6.Check whether the pen can write if it writes in ulta i.e if we sign or write or anything by keeping in the wall and writing
7.Check whether the pen is very attractive
8.Check whether the pen is very good in writing i.e nib area
Test cases for Fan:
1.To check whether the fan should have on off button
2.To check whether the fan should have at least 2 wings
3.To check whether the fan should give long life
4.To check whether the fan should give good speed of air
5.To check whether the fan`s speed can be controlled by using the buttons
6.To check whether the fan should run in all environmentsaravanan123
- Jul 20th, 2010
Test case is nothing but writing the test description,test data,test actions ,actual and expected output these will be noted there based upon the requirements Test cases for Table: 1.To check whether ...
raj29
- Jun 8th, 2008
To test the INK pen the following prerequisites should be there 1. cap 2. The pen should be divided into 2 part. The top to hold the nib and the bottom to hold the ink. 3. The parts cap, top of the...
-
How do you create a test data for testing purpose
How do you create a test data and how many methods are available?
Read Best Answer
Editorial / Best Answer
mathan_vel- Member Since Dec-2007 | Aug 18th, 2009
Test Data are data which have been specifically identified for use in tests, typically of a computer program. Some data may be used in a confirmatory way, typically to verify that a given set of input to a given function produces some expected result. Other data may be used in order to challenge the ability of the program to respond to unusual, extreme, exceptional, or unexpected input. Test data may be produced in a focused or systematic way (as is typically the case in domain testing), or by using other, less-focused approaches (as is typically the case in high-volume randomized automated tests). Test data may be produced by the tester, or by a program or function that aids the tester. Test data may be recorded for re-use, or used once and then forgotten.
Domain testing is a family of test techniques that focus on the test data. This might include identifying common or critical inputs, representatives of a particular equivalence class model, values that might appear at the boundaries between one equivalence class and another, outrageous values that should be rejected by the program, combinations of inputs, or inputs that might drive the product towards a particular set of outputs.
saravanan123
- Jul 20th, 2010
We are creating a test data based upon what output we need to get based upon what input we have to give.this also depends upon the requirementsThis may be different to each project
mathan_vel
- Aug 18th, 2009
Test Data are data which have been specifically identified for use in tests, typically of a computer program. Some data may be used in a confirmatory way, typically to verify that a given set of input...
-
How to write test case on compose box in email
goksn
- Sep 23rd, 2009
In high level, I can see the coverage asPlatform coverage-> From where the emails are triggered like from email client (different email clients like Thunderbird,MS Outlook express, Opera Mail, Appl...
saravanan123
- Jul 20th, 2009
Test Case forCompose Mail1.Check whether when you give yahoomail and press enter in firefox it moves to login page2.Verify whether it doesn`t moves give the url name correctly3.Check whether you are e...
-
Hii am working into a project where mails has to be sent to the clients i have to write the test cases to test the sending of the mails what are all the possibilitiescan someone write the test cases in a doc and send it to jyothi_katgi@rediffmail.comRegardsjyothi
saravanan123
- Jul 21st, 2009
Test Cases For sending the mails to client area i.e from your client side checking the mail1.Check whether when you give the correct userid and password the mail account opens2.Verify if it not opens ...
jyothi_k
- May 10th, 2006
hibasically i need test cases for the functionalities which may come across for mailsjyothi
Test Cases Interview Questions
Read Best Answer
Ans