What are the disadvantages of ACL compared to a Firewall?

dcapote

 Profile Answers by dcapote Questions by dcapote

• Feb 3rd, 2009

Firewalls have many additional features/benefits such as Statefull Packet Inspection.

Answer Question  Select Best Answer

What is a hardware loopback plug?

Astro Rat

 Profile Answers by Astro Rat Questions by Astro Rat

• Jan 14th, 2009

Hardware loopback connectors are simple devices that redirect outgoing transmissions from a system directly back into it. Hardware loopback connectors are used in conjunction with diagnostic software ...

Answer Question  Select Best Answer

Which of the following is the class A network.1) 128.14.0.0 ii) 127.0.0.0 iii) 127.8.0.0 iv) 127.4.5.0

steveprakash2k3

 Profile Answers by steveprakash2k3 Questions by steveprakash2k3

• Dec 8th, 2008

i) 128.14.0.0 =======> This is Class B
ii) 127.0.0.0 =======> This is Loop Back
iii) 127.8.0.0 =======> This is Loop Back
iv) 127.4.5.0 =======> This is Loop Back

Answer Question  Select Best Answer

Luking for answers

 Profile Answers by Luking for answers Questions by Luking for answers

• Dec 5th, 2008

One more important difference is Win 2003 supports Volume shadow copy featurewhich is not in windows 2000..A NEW TOOL TO RECOVER FILES Window 2003 server includes IIS server in it.

kapooranil14

 Profile Answers by kapooranil14 Questions by kapooranil14

• Nov 10th, 2008

Windows Server 2000 has three editions and does not include managment snap-inwhile Windows Server 2003 has 4 editions as followsStandard editionWeb editionEnterprise editionData center editionIt has manament snap-in too which can handle almost all queries.

Answer Question  Select Best Answer

chinmay_lp

 Profile Answers by chinmay_lp Questions by chinmay_lp

• Oct 13th, 2008

Router - Basically routers are use to connect different n/w's together.Routers  communicate between two or more  networks.L3 Switch - L3 switches are just like L2 switches.but there is a...

M.Alam

• Nov 10th, 2007

A Layer3 switch can handle a network divided in multiple segments running on different subnets, as it can perform routing? too.Whereas?for such networks we need?a Layer2 switch?for inter-segment communication and a router for?one segment to?another segment???

Answer Question  Select Best Answer

vinit mishra

 Profile Answers by vinit mishra Questions by vinit mishra

• Oct 9th, 2008

FTP means File Transfer Protocol & UDP is User Datagram Protocol.Both are usefull for transfering Data.but FTP is more Secure in compare of UDP.

waugh_ananda

 Profile Answers by waugh_ananda Questions by waugh_ananda

• Feb 23rd, 2008

Dear Sandesh, IP is 32 bit (not byte) and IPv6 is 128 bit in length

Answer Question  Select Best Answer

Dushyant111

 Profile Answers by Dushyant111 Questions by Dushyant111

• Aug 30th, 2008

Both are virtual group, collision domain are group of computer in a network that share bandwith c/a collision domain, collision domain decrease the data rate.Broadcast domain are the group of com. in ...

tinku

• Nov 22nd, 2007

Collision Domain: If you have 10 Ticket counters in a Reservation counter, you can reduce the rush, similarly, a switch can provide 24 ports to avoid colission of data.Broadcast Domain: is based on nu...

Answer Question  Select Best Answer

What is the features of BGP Protocol? How it is different to other protocol

amnfrs

 Profile Answers by amnfrs Questions by amnfrs

• Jul 29th, 2008

Border Gateway Protocol is the core routing protocol .It works by maintaining a table of IP networks which designate network reachability among autonomous systems (AS). It is described as a ...

Answer Question  Select Best Answer

sthil_007

 Profile Answers by sthil_007 Questions by sthil_007

• Apr 22nd, 2008

TCP/IP - Transmission Control Protocol/Internet Protocol. The dominant protocol suite in the worldwide Internet, TCP is Layer 4, the transport layer. IP is Layer 3, the network layer.

JITHINRAJ

• Oct 25th, 2007

The Transmission Control Protocol (TCP) is one of the core protocols of the Internet protocol suite TCP provides reliable, in-order delivery of a stream of bytes, making it suitable for applications l...

Answer Question  Select Best Answer

singhathakur

 Profile Answers by singhathakur Questions by singhathakur

• Feb 11th, 2008

Hi        This is sutable method for discover the destination address.

Answer Question  Select Best Answer

singhathakur

 Profile Answers by singhathakur Questions by singhathakur

• Feb 11th, 2008

Hi we can have 2 more dhcp in a same network but each dhcp server should be diffrent ip address.other wise network will be colide.

anit vohra

• Nov 21st, 2007

Yes, we can create as much scopes on the same network. For this what we have to do:- First we can create more than one scope and afterwards we have to create superscope, and merge as much scopes in that. This is mainly use for load balancing of network and fault tolerance.

Answer Question  Select Best Answer

sarunhere

 Profile Answers by sarunhere Questions by sarunhere

• Dec 26th, 2007

Ya Every answer is correct still you have to prepare some basic LikeDNSDHCPWINSTrouble shooting with networkRouter conceptand Domain Conceptif you know mail server it will be good for youBest of luck

vmshenoy

 Profile Answers by vmshenoy Questions by vmshenoy

• Jan 8th, 2007

Hi vijay first of all best of luck for ur interview!1)u should have idea of OSI layers2) should know abt some basic commands like PING,IPconfig3)should know abt IP addresses.4)which type of IP class does india use?5)ethernet 6)Traffic control algo like leaky bucket and token bucketBEST OF LUCK

Answer Question  Select Best Answer

Benjamin200975

 Profile Answers by Benjamin200975 Questions by Benjamin200975

• Dec 7th, 2007

Virtual LANs (VLANs) divide one physical network into multiple broadcast domains. But, VLAN-enabled switches cannot by themselves, forward traffic across VLAN boundaries. So you need to have routing b...

Answer Question  Select Best Answer

RAKSHIT SHARMA

 Profile Answers by RAKSHIT SHARMA Questions by RAKSHIT SHARMA

• Nov 19th, 2007

1) In 2000 we cannot rename domain where as in 2003 we can rename domain.2) 2000 supports IIS 5.0 and 2003 supports IIS 6.0 . 3) 2000 supports 4-node ...

ahmad

• May 3rd, 2007

There are many features in windows 2003 domain controller as compares to windows 2000 DC like 1- We can create cross forest link trust . 2- Can rename domain name. 3- More scaleable 4- Have th...

Answer Question  Select Best Answer

bharath

• Nov 16th, 2007

roaming profile is created by admin on server,can be accessed on any computer throughout the network and can make changes from any computer in network and the changes updated in server.to give excel p...

kesi reddy

• Mar 31st, 2007

roaming profile:first we have create a one text document with sharing permissions.go to ads and select pretricluar user right click/properties.mentioned profile path system name/ share folder// user n...

Answer Question  Select Best Answer

ch.sridhar

• Sep 12th, 2007

Remote Access ServerRemote access is the ability to get access to a computer or a network from a remote distance. In corporations, people at branch offices, telecommuters, and people who are traveling...

biraj n mishra

• Jan 19th, 2007

RAS stand for Remote Access Service.in RAS maximum 2 users can remotely acess the PC not more than taht.if u want to acess more user then we have to make licence

Answer Question  Select Best Answer

Benerjee

 Profile Answers by Benerjee Questions by Benerjee

• Sep 3rd, 2007

(PCM) a way to convert sound or analog information to binary information (0s and 1s) by taking samples of the sound and record the resulting number as binary information. Used on all CDs, DVD-Audio, and just about every other digital audio format. It can sometimes be found on DVD-Video.

Answer Question  Select Best Answer

rabindra kandher

• Aug 31st, 2007

to add a client system at first we need to type of configuration logical & physical . at 1st we have to check all the client system including domain server properly connected with the hub or switc...

sac

• May 3rd, 2007

For configuring client from 2000 ads serverYou need to take the following step Right click on My Computer - Properties - In Computer Name Tab?- Click on change?TabThen in?domain box type the nam...

Answer Question  Select Best Answer

chandar

• Aug 5th, 2007

Hi,RARP is Reverse Address Resolution Protocol. This protocol is working in Datalink layer. Coz it is made so to work, in that layer to find the DLCI number in a WAN Link.

Answer Question  Select Best Answer

Sumit Sinha

• Jul 14th, 2007

The communication is between two SERVERS. But to a server can communicate with a client only. so if both system are behaving as server then first of all on both system a client should run as well.Now ...

mitul patel

• Jun 10th, 2006

hi,i am giving answer by considering switch and router.switch is a layer2 device(data link layer) while router is a layer 3 device(network layer). now tcp/ip is a peer-peer protocol suite, which means...

Answer Question  Select Best Answer