Samir Dhara

• Dec 2nd, 2014

Subnetmask is screen of number used for routing traffic within a subnet
Host is non changeable IP of all class

Answer Question  Select Best Answer

how to check printer registry ? and whats the need to check printer registry waht its use?

Pavan

• May 27th, 2015

Every software which is installed on the computer registers itself in registry. Start->run>regedit-> HKEY_CURRENT_USERPrinters

Answer Question  Select Best Answer

(i) Simplex   (ii) Half-duplex   (iii) Full-duplex.

shridhar

• Apr 21st, 2006

Hi,Simplex ,Half Duplex , Full Duplex , Fiber Connectivit (Very Fast) Shridhra

ankitsays9

 Profile Answers by ankitsays9 Questions by ankitsays9

• Jan 15th, 2006

There are three possible ways of data exchange. These are:1. Simplex: in this, data is transmitted in one direction only. this means one end will always be a transmitter and the other end will always ...

Answer Question  Select Best Answer

A generic term for section of a large networks usually separated by a bridge or router.

panditume

 Profile Answers by panditume Questions by panditume

• Jul 6th, 2011

Dividing the network into smaller groups is a subnet.

Crsna Suneel

 Profile Answers by Crsna Suneel Questions by Crsna Suneel

• May 19th, 2009

In topology and related areas of mathematics, a subnet is a generalization of the concept of subsequence to the case of nets. The definition is not completely straightforward, but is designed to allow...

Answer Question  Select Best Answer

Telnet is also called as terminal emulation. It belongs to application layer.

Rajnish

• Apr 30th, 2012

What is terminal server and how to work in a terminal server.

Sandhya.Kishan

 Profile Answers by Sandhya.Kishan Questions by Sandhya.Kishan

• Apr 19th, 2012

Terminal emulation is the ability to make one computer terminal appear like some other terminal. Terminal emulation is used to give the users the ability to log on and get direct access to legacy pro...

Answer Question  Select Best Answer

It is a protocol used to advertise the set of networks that can be reached with in an autonomous system. BGP enables this information to be shared with the autonomous system. This is newer than EGP (Exterior Gateway Protocol).

Boti Curry

• Jan 5th, 2007

BGP stands for Border Gateway Protocol. It is an inter-AS ( Autonomous System Routing Protocol ). BGP is the routing protocol that runs the Internet. BGP is used to interconnect network islands ( ASs ...

gautam chandra pandey

• Feb 9th, 2006

In the BGP,the criterion is the policy,which can be set by the Administrator .the policy defines what paths should be chosen.

Answer Question  Select Best Answer

shridhar76

 Profile Answers by shridhar76 Questions by shridhar76

• Mar 27th, 2006

This is depend upon clients need, in broadband connection today there r static ip is mostly provided by Service provider for better result , in Dynamic routing the congession is very less.shridhar

Kalyan Raghavan

• Feb 4th, 2006

As Saurabh said; we can use static and Dynamic Routing in one network. However Dyanmic Routing is used to have the best path no matter what the status of the physical links.All routing protocols have ...

Answer Question  Select Best Answer

zz

• Jul 30th, 2006

If the following two conditions are simultaneously true:1. routing error leading to a loop2. the TTL field of the IP packet is not properly decremented at each hop

swathee

• May 29th, 2006

count to infinity problemor may due to the condition like (in RIP)if it exceeds 16 hops..

Answer Question  Select Best Answer

dharmesh

• Jul 15th, 2006

VLAN also refers to a LAN port grouping within a single switch. VLANs improve security by isolating groups. A VLAN is a bridging domain and all broadcast and multicast traffic is contained within it.

Lata Patel

• Jun 7th, 2006

Vlan is virtual Lan...vlan have 2 main advantages:1] it is used for security purpose, eg by making vlan u can diffenrentiate group.2]u can increase collision domain, so collision is reduced 

Answer Question  Select Best Answer

pavan

• Feb 18th, 2013

An email client, email reader, or more formally mail user agent (MUA), is a computer program used to manage a users email..
1.email client is a client who change to any document in web page which he registered
2.web client is a client who doest be change anything only they were read the data

Kaushal Patel

• Jun 4th, 2006

Email ClientEmail clients download your emails onto your computer. Using a specialized email program such as Outlook Express or Apple Mail has the advantage of giving you complete control over your em...

Answer Question  Select Best Answer

Thomas Whitten

 Profile Answers by Thomas Whitten Questions by Thomas Whitten

• Jun 27th, 2011

A layer 2 switch provides connectivity but doesn't act upon the packets at all.? These switches are often found in small offices, your home or on the very edge of a LAN to provide Internet or client/...

sony

• Sep 15th, 2006

A layer 2 switch provides switchingA Layer 3 switch provides Switching as well as Routing

Answer Question  Select Best Answer

Pruthvi Raj

• Aug 10th, 2006

Osi reference model consisting of 7 layers hepls the data to be moved in more optimal from source to the destination.And here the protocols are better hidden so the furhter enhancement can be done easily.This reference model can be used for both connection oriented and connectionless service.

sunil k. soni

• Jul 20th, 2006

It is very important model for networking:The main aim to design the OSI model is that actully they want to set a standerd for the communication and want to standarized the network equipement so that they would not be any Brand consuines

Answer Question  Select Best Answer

viki

• Oct 20th, 2011

OST Conversion to PST software convert database and recover OST to PST with all emails, contacts, tasks, notes, calendar, journal and appointment, etc. OST to PST Conversion Utility easily understand OST file. http://www.exportost.com/

vikrant sharma sysnet global technologies

• Jul 27th, 2006

 In Microsoft Office Outlook 2003, a new offline folder file format is introduced that offers greater storage capacity for items and folders and supports multilingual Unicode data. An offlin...

Answer Question  Select Best Answer

Class A 0.0.0.0 - 127.255.255.255Class B 128.0.0.0 - 191.255.255.255Class C 192.0.0.0 - 223.255.255.255Class D 224.0.0.0 - 239.255.255.255Class E 240.0.0.0 - 247.255.255.255

sabarish

• May 27th, 2007

class A  1 - 126 . class B 128 - 191.class C 192 - 223.class D 224 - 239.class E 139 - 246. 

abhay narayan

• Dec 5th, 2006

Answer: Class A     0 -    126      255.0.0.0      (127 is loopback)Class B     128 - 191. ...

Answer Question  Select Best Answer

Routable protocols can work with a router and can be used to build large networks. Non-Routable protocols are designed to work on small, local networks and cannot be used with a router

preeti

• May 11th, 2007

Routable protocols can work with a router and can be used to build large networks. Non-Routable protocols are designed to work on small, local networks and cannot be used with a router

nikhil_rattan

 Profile Answers by nikhil_rattan Questions by nikhil_rattan

• Jan 10th, 2007

Routable protocols can work with a router and can be used to build large networks. Non-Routable protocols are designed to work on small, local networks and cannot be used with a router 

Answer Question  Select Best Answer

Along any transmission path from a given source to a given destination, a group of virtual circuits can be grouped together into what is called path.

neha

• May 17th, 2012

Such a path is a path which virtual physically possible. The path from Source to Destination cover every Node. It makes virtual circuit.

Sandhya.Kishan

 Profile Answers by Sandhya.Kishan Questions by Sandhya.Kishan

• May 1st, 2012

A bundle of virtual channels which share the same end point is known as virtual path.Each virtual path is identified by its unique virtual path identifier (VPI). All channels within a single path must...

Answer Question  Select Best Answer

It is a simple protocol used to exchange information between the routers.

monami85

 Profile Answers by monami85 Questions by monami85

• Jun 3rd, 2008

Rip is a true distance vector routing algorithm.Every 30seconds rip sends it complete routing table out to all active interfaces.RIP uses hop count to determine the best way to reach a remote network,...

RameshKumar Kaliamoorthi

• Dec 5th, 2006

RIP is one of the most enduring of all routing protocols. RIP is also one of the more easily confused protocols because a variety of RIP-like routing protocols proliferated, some of which even used th...

Answer Question  Select Best Answer

PING stands Packet Internet Gopher. This is a utility for ensuring connectivity between computers . ICMP protocol works behind this utility. Under it , sending node sends packets to destination node and reply is received if there is proper communication between two.

narinder

• Apr 20th, 2006

PING IS Packect Internet Grope it is using for check the connectivity with other .

shridhar76

 Profile Answers by shridhar76 Questions by shridhar76

• Mar 27th, 2006

HI,This reply's echo msg that otherside pc's is in network or not.checking for network status between two nodes in network.shridhar

Answer Question  Select Best Answer

RAJA

• Apr 25th, 2006

 The communication b/w two tcp host are established by using 3-way handshaking.these are request , acknowldgement ,and data transfer.transmitting host sent request to receiving host,receiving host sent ACK to senting host and then data is transfer from source to destination.

shaik_bavajan

 Profile Answers by shaik_bavajan Questions by shaik_bavajan

• Apr 15th, 2006

Three way TCP/Ip handshake means, while communicating with other system.3 procedure will done those are request,reply and aknoledgement.

Answer Question  Select Best Answer

Sarith

• Sep 21st, 2006

That is a TCP ip rule you can't ping to another subnet why because of if you try to communicate to another machine the machine's TCP/IP protocol suite will check by using AND ing the destination IP. ...

Abhishek Bhat

• Jul 1st, 2006

In case you can ping your default gateway also but cant reach the subnet means your first hop router does not have a valid route to the subnet

Answer Question  Select Best Answer