-
Missing Test Cases
A tester(A) is working on Module 1 and tester(B) is working on Module 2. After sometime manager appoints B to Module 1 and A to Module 2. Now If B sees that some test cases/data are missing. What Should B do?
mathan_vel
- Sep 17th, 2010
Check the Testcases bi directionaly from Traceability Matrix with Requirement and trace out the missing testcases. Design Testcases for the missed cases.
virgosls
- Aug 13th, 2010
Detailed RCA(root cause analysis) should be carried out.1. Any such scenarios should be verified using Bi-Directional Tracebility matrix. Using Tracebilty matrix, we can identify how particular requir...
-
When u test a web application in different browsers what difference u will find(i mean changes with application)
mathan_vel
- Sep 16th, 2010
While doing compatability testing for web application. below are some of the differences.1. Design issues(Css files not supports or it's not defined for the browser)2. Object not supports, which makes action not supports.(ActiveX Control)
-
Waht is testlog document in testing process?
mathan_vel
- Sep 16th, 2010
The Test Log provides a detailed, typically time-based record that serves both as verification that a set of tests were executed, and provides information relating to the success of those tests....
skbandaru
- Oct 26th, 2005
Testlog provides a chronological record of all relevant details about the execution of the testcaes.
-
How do u established link with requirements and test cases to do traceability matrix?
mathan_vel
- Sep 16th, 2010
In Manual process, it can be done through with Requirement Tracability Matrix.In QC, Req id is trace with Test Case(Test plan-->Test Case)
Aruna Kumar G
- Sep 7th, 2006
Requirement Traceability matrix have a template, in that we can find columns such as requirement number/requirement document name, Test case. See following Table Module nameRequirement Number/Req...
-
How do you perform regression testing?
Answer posted by Ravi on 2005-06-01 13:37:16: Regression Testing is carried out both manually and automation. The automatic tools are mainly used for the Regression Testing as this is mainly focused repeatedly testing the same application for the changes the application gone through for the new functionality, after fixing the previous bugs, any new changes in the design etc. The regression testing...
findvishwa
- Sep 6th, 2010
@"Regression testing is retesting..."Please note regression testing is different from retesting
bhopu
- Aug 5th, 2010
Basically Regression testing is nothing but reexecution of some or all the testcases to check fixation of defect is going to create any problem in existing module also in any newly created modules.Reg...
-
In the Static Testing, what all can be tested?Can test condition, test case & test script help you in performing the static testing?
rmolabanti
- Sep 2nd, 2010
Static testing means testing the things with our excecuting the software.Testing the things by excecuting hte software is dynamic testing.Static testing includes reviewing/verifying of any kind of doc...
mathan_vel
- Sep 1st, 2010
Static Testing is perform by developers on Code (Reviews, Inspection, Walkthrough) before delivered it to the Test team for functional Testing.Yes, Test Condition, Test Cases, Test Scripts can help perform Static Testing.
-
Product Delivery
The product has undergone several unexpected changes during your previous test cycles and as a result there have been more test cycles than originally planned. Marketing has a firm deadline on which to announce this product to the public and upper management feels obligated to deliver on schedule. Nevertheless, your test team had discovered several priority 1 defects in the last test run and the...
virgosls
- Aug 14th, 2010
As requirement is frequently changing then the extra efforts to incorporate these changes must be published by Test manager to all the relevant parties and release must be postponed.But If release dat...
-
Test Effort
You have been hired into a small company where a hot-shot developer serves as business analyst and project manager on top of his development duties. He has undermined your efforts to create a worthwhile test management process over the past month. He refused to provide requirements and specifications for the product and is now delivering the first build for you to test. How do you handle this situation?
virgosls
- Aug 13th, 2010
Reason is not still clear why the BA/ProjectManager is failed to provide documented requirements. It could be either requirements are not freezed either its very rapid development approach where requi...
-
Corner Case
What is a corner case?
virgosls
- Aug 13th, 2010
A corner case is the problem or situation arised in system which is caused by more than 1 factors or variables reaching to its minimum/maximum state. For example when computer is put on load with proc...
-
How does unit testing play a role in the development / software lifecycle?
mathan_vel
- Jul 22nd, 2010
Unit Testing play a important Role in the Development & Software Life Cycle. Unit tests find problems early in the development cycle. Which reduces the cost. Facilitates Change Readily-available u...
Sujatars
- Oct 10th, 2007
Unit testing helps in verfying that a unit or module that is built is as per requirements and functions properly .It helps in preventing bugs getting multiplied and migrated in later phases.
-
What is non-regression testing? what is the difference between regression and non-regression testing? what is the need for non-regression testing any example?
chitta10
- Apr 4th, 2010
Non Regression testing means only testing.Regression testing means the testing the application again and again in tow scenarios.(i)When any defects are found by tester and rectified by devel...
Hlaing Su Su Htar
- Apr 1st, 2010
After programmer modified one program, tester tested only this program and not tested other related programs. That means non-regression testing
-
What do you like (not like) in this job?
pavani prasad
- Mar 28th, 2010
I like testing beacuse I have to think in both positive and negative ways on the application.negative means breakthrough attitude.As a tester I can't depend on any technology.I can test the application which is prepared using any technology.
kurtz182
- Dec 5th, 2009
This is a very good question!Likes:1) Being part of a team that is striving for the same outcome.2) Having a significant impact on the quality of product and services.3) Being a customer advocate...
-
Most Important Person on a Test Team
Consider the roles of the Test Manager, Test Lead, and Tester. Who among them is the most valuable member and why?
vamc366
- Feb 3rd, 2010
All the three are very important to make the project sucessfull.Test Manager: He plas a vital roll in understanding the new projects/releases that are in pipline and staffing the resources.Team Lead: ...
-
What are the bug and testing metrics
kurtz182
- Jan 4th, 2010
Some defect and test metrics are:Effort variance = (actual fffort - planned effort) / planned effort * 100Schedule variance = ((actual calendar days - planned calendar days) + start variance) / planne...
G.D.S.Prasad
- Mar 11th, 2009
Test Metrics Include:1. Effort Variance2. Shedule variance3. Test Effectiveness4. Productivity
-
For a bug with high severity can we give the priority also to be high...If so why we need both?For exampleseverity=1 and priority=1...Cant we have only priority/severity??
Give me answer
kurtz182
- Jan 4th, 2010
Defect reports should include both severity and priority. Severity refers to impact on customer; Priority refers to the urgency of its fix. You can have a high severity defect that&nb...
sha
- Jul 8th, 2006
HiThis?is Sha.?I?think?that Prority is given on basics on functionality, where as Severity is given on meaning ex. Addtion of two number.By giving two number as input the output generated is corre...
-
What is the difference b/w frame work,architecture and methadology in testing?I mean Define--what is frame work,architecture and methadology?
kurtz182
- Jan 3rd, 2010
A software framework is a re-usable design for a software system which may include support programs, code libraries, a scripting language, or other software to help develop and glue together the ...
bharathi_ark
- Nov 21st, 2006
Hi,Frame Work: It is a structure for describing a set of concepts, methods, technologies and cultural changes necessary for a complete product design and manufacturing process.Archetecture: Combinatio...
-
What is test Strategy...what is it relation with test plan and test design...
kurtz182
- Jan 3rd, 2010
A test strategy describes the general approach to testing in terms of people, tools, procedures and support. It is used to gain feedback from key stakeholders as early as possible in t...
subbu
- Dec 22nd, 2006
hai rajkumar........im not agreeing with u r answer based on test strategy only we will prepare test plan....
-
What is nightly build?
kurtz182
- Jan 3rd, 2010
A nightly build is the practice of automatically launching a build that reflects the current state of the sourcecode each night. Developers arrive in the morning to assess the results...
sudhakar2068
- Oct 19th, 2006
Nightly BuildsNightly builds are a good thing, they provide immediate feedback to developers if they broke the build. Having a nightly build means that the software stable and is likely to build for n...
-
What is the relationship between Use Case and Test Case?
kurtz182
- Jan 2nd, 2010
A use case is a method that is used to identify, clarify, and organize system requirements. A good use case describes a required function on a high level and from a user perspective and it involves in...
Sunil Kumar Nanda
- Sep 15th, 2006
Test Case: Test Case is a commonly used term for a specific test. This is usually the smallest unit of testing. A Test Case will consist of information such as requirements testing, test steps, verifi...
-
What are the three key skills a Tester should possess ?
Testing General Interview Questions
Ans