-
-
Prepare 10 test cases for the above scenario based on minimum balance and withdraw amount input ?
When you try to withdraw money from an ATM machine, the minimum balance is 5000 prior to the withdraw.At any time user can withdraw an amount 500 only Assume remaining conditions are working.
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 16th, 2010
Test Cases :
1. To check whether the card is valid
2. To check whether account is valid
3.To check whether the card is working only with the correct pin number
4.To check whether the card is directed to work with appropriate a/c
5.To check whether the card has miniumum balance of above 5000
6.To check whether the card holder can get the amount when thereshalinimohan
- Jan 12th, 2011
Try to input an amount more than 5000 and verify that atm shows the required error message Try to input an amount equal to or less than 5000 and verify that user is able to withdraw the entered amoun...
saravanan123
- Jul 16th, 2010
Test Cases :1. To check whether the card is valid2. To check whether account is valid3.To check whether the card is working only with the correct pin number4.To check whether the card is directe...
-
How to write test cases in oracle application projects?
Read Best Answer
Editorial / Best Answer
Answered by: Surya Kumar Reddy
- Aug 1st, 2011
Test cases should be derived from business requirements of the client. - Read through the business requirements clearly and then look at the configuration of the oracle apps. This would help understand the way requirements are mapped in the oracle application. - Once the mapping is understood clearly, writing test cases would just be an offset of the step 1. Test cases should bring out each and every business requirement of the client. - Few test cases will be needed to test the intended functionality of the product. These must be included in the test cases mandatory apart from business req's driven test cases.
Surya Kumar Reddy
- Aug 1st, 2011
Test cases should be derived from business requirements of the client. - Read through the business requirements clearly and then look at the configuration of the oracle apps. This would help understa...
saravanan123
- Aug 13th, 2009
As a Tester we should know that there is not a any difference in writing Test cases for Java,.net or like Oracle these are only the platforms based upon this only the application is built we are going to test only in the front end of the application not on the coding so it doesn`t matter
-
Write test cases for sending email from cell phone.
kurtz182
- Dec 26th, 2009
Here are a few sample test cases:APPLICATION PAGE1) mobile email is an option on this page2) mobile email icon image meets spec3) mobile email icon is located in proper location on page4) can place fo...
saravanan123
- Aug 13th, 2009
1.Check you have got enough balance and battery on you cell 2.Check whether you GPRs activation is working fast 3.Check whether if you select gprs in your phone it connects to net 4.Check whether ...
-
How will you write a test case for Graph Calculation?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 13th, 2009
I would study the functional requirements and technical specifications and then I would create test cases based on my knowledge. In general, I would do the following:
1) Enter valid data in all fields and verify graph is properly displayed
2) Enter valid data in all but one field and invalid numeric data in remaining field and ensure validation
3) Enter valid data in all but one field and no data in remaining field and ensure validation
3) Use boundary value analysis to select input data
4) Use equivalence class partitioning to minimize input data
5) Enter alpha characters in all fields and verify validation
6) Enter special characters in all fields and verify validationsaravanan123
- Jul 12th, 2010
Test Case For Graph Calculation :1. To check whether we have got x values2. To check whether we have got Y Values3. To check whether we are marking in graph sheet only4. To check whether we are ...
kurtz182
- Dec 13th, 2009
I would study the functional requirements and technical specifications and then I would create test cases based on my knowledge. In general, I would do the following:1) Enter valid data in all f...
-
How will you write testcase for a quadratic equation ?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 13th, 2009
The quadratic equation is a polynomial of the second degree.
Its general form is
ax^2 + bx + c = 0
where x represents a variable and a, b, and c are constants.
I would study the functional requirements and technical specifications and create test cases based on my knowledge. The requirements might include the following features:1) Text which describes the quadratic equation and how to use the application.
2) A graphical representation of the quadratic function.
3) Text which decribes the first and second root of the equation.
4) Text which describes the equation's descriminant.
I will assume the requirements indicate that the application simply solves for x when all of the constants are input into the equation. I will also assume there is no
graphical representation supplied by the application. In this case, I would do the following:
1) Enter valid data in all fields and verify result.
2) Enter valid data in all but one field and invalid numeric data in remaining field and ensure validation.
3) Enter valid data in all but one field and no data in remaining field and ensure validation.
4) Enter a = 0 to verify it becomes linear.
5) Data set should include the following types:
a) Integers
- Positive
- Zero
- Negative
b) Decimal (applying greatest number of significant digits)
- Postive
- Negative
6) For each data type, I would
a) Use boundary value analysis to select input data for all data types.
b) Use equivalence class partitioning to minimize input data.
7) Enter alpha characters in all fields and verify validation.
8) Enter special characters in all fields and verify validation.
9) On each text box, I would try to enter numbers that extend beyond the range that the text box can accept.kurtz182
- Dec 13th, 2009
The quadratic equation is a polynomial of the second degree. Its general form is ...
Atulkale04
- Nov 25th, 2009
1. Valid test cases with all integer vaules2. Valid test cases with all imaginary values3. Valid Test cases with negatives values4. Valid test cases with infinity values.Same for invalid test cases.5....
-
Write the test cases for File Transfer ?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 26th, 2009
TEST CASES
FUNCTIONAL
1) Transfer an empty file
2) Transfer a file with one character
3) Transfer a file with maximum number of characters
4) Transfer a file that exceeds maximum number of characters by 1 (max+1)
5) Transfer a file that is less than maximum number of characters by 1 (max-1)
6) Transfer a file that contains the entire ASCII character set
7) Transfer a file that contains the entire UTF-8 character set
8) Transfer a file that contains the entire Unicode character set
9) Transfer a file that contains the entire Unicode big endian character setPERFORMANCE
Verify speed of file transfer meets specificationSTEPS
1) send file
2) navigate to the file destination,
3) verify the file is transferred to proper target destination,
4) verify the filename has not changed,
5) verify the file's size has not changed,
6) open the file and
7) verify that the contents had been transferred without changes.mithr17
- Nov 30th, 2011
Adding to Kurtz answer.. Functional: Every file transfer mode can handle a specified limit of files at a time. Keeping this requirements in mind, check the behavior for - Upload files exceeding the ...
kurtz182
- Dec 26th, 2009
TEST CASESFUNCTIONAL1) Transfer an empty file 2) Transfer a file with one character3) Transfer a file with maximum number of characters4) Transfer a file that exceeds maximum number of characters by 1...
-
Test Case Design for Website File Uploading
Design a test case for a website feature "user upload PPT file to the web server".After uploading a PPT file, and then download it. How do you test the file is the same as the one you uploaded?
Read Best Answer
Editorial / Best Answer
Answered by: Jax
- Jul 15th, 2011
1-Access the website 2-Verify the Click on user link(through where you need to open upload the file) 3-Verify the pop up window or text box appeared for selecting the file. 4-Verify the correct PPT file 5-Verify the name of the file 6-Validate that you have clicked on upload button 7-Verify the successfully uploaded message 8-Access the webserver 9-Verify the file uploaded in server.
Jax
- Jul 15th, 2011
1-Access the website 2-Verify the Click on user link(through where you need to open upload the file) 3-Verify the pop up window or text box appeared for selecting the file. 4-Verify the correct PPT fi...
prabadi
- Mar 25th, 2011
1.We need to?compare the file name of the file uploaded into web server and download file.2.We need to?compare the extension of the file uploaded into web server and download file.3.Verify the file ...
-
Write test case for Find and Replace funcationality?
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 20th, 2010
Test Cases:
1.To check whether find and replace options should be there
2.To check whether when we give some word to find and replace it must user whether to change for the whole or only particular word
3.To check whether shortcut key is working properly
4.To check whether all the words are replaced correctly5.To check whenever the user clicks find option or replace option immediately find and replace tab should be open6.To check whether when we select for more option it must display with more options7.To check whether if there are more than one page then we must click for goto and we give the page number it must work as per the dateils in that pagesaravanan123
- Jul 20th, 2010
Test Cases:1.To check whether find and replace options should be there2.To check whether when we give some word to find and replace it must user whether to change for the whole or ...
-
How to write requirements and test cases for sign up yahoo new user account .
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 20th, 2010
1.Check whether firstname field accept only alphabets
2.Check whether last name field accept only alphabets
3.Check firstname last name cannot accept other than alphabets - negative
4.Check the login name field accept only alphabets numerics and special characters except dot.
5.Check whether the desired login name is created only when it displays specific name is available.
6.Check whether desired login name cannot be created with existing login name - negative
7.Check password accept more than 8 characters
8.Check password cannot accept less than 8 characters - negative
9.Check the password and re-enter password field be the matched
10.Check it display a message when password and re-enter password mismatches - negative 11.Check whether you can view the security question
12.Check whether answer field cannot be null.
13.Verify whether secondary mail field entered with valid id
14.Verify whether your location is present in the location field
15.Verify whether the captcha entered and available is correct.
16.Check every time you refresh or selecting i accept it display a new captcha
17.Check captcha be unique
18.Check captcha is case sensitive
19.Check when i accept is selected it moves to next page
20.Check when any required field is not entered or entered with the wrong values it display a message with red color fontsaravanan123
- Jul 20th, 2010
1.Check whether firstname field accept only alphabets 2.Check whether last name field accept only alphabets 3.Check firstname last name cannot accept other than alphabets - negative 4.Check the login ...
-
How would you test a COTS integration?
What are the test factors and test design?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 17th, 2009
Human factors are very important in testing COTS applications:
1) Communicate with the vendor
2) Get Information for Test Planning
3) Get Support for Testing
4) Get Cooperation for Integration Testing
5) Get Customer and User Input and Assistance in Testing
The phases of testing a COTS application:1) Understand the COTS application and how it will be used
- Determine test integration 'glue'
2) Develop a COTS test strategy
- objectives
- understand general COTS risks
- identify risks unique to your application
3) Plan for testing COTS application
- Map planning activities to COTS life cycle
- Gather required input and entry criteria
- Determine what needs to be verified
- Determine what needs to be validated
- Create a test plan
- Create test cases; test scenarios; test scripts
- Add traceability to tests
4) Test execution on COTS application
- build the environment (hardware, software, tools, data, and verify integration feasibility)
- train testers
- Perform tests
- record defects
- verify results
- perform regression tests
5) Analyze and report results of COTS testing
- evaluate defects
- make sense of information to improve processes
> requirements
> acquisition
> integration
> customization
> testing
> implementation
kurtz182
- Dec 17th, 2009
Human factors are very important in testing COTS applications: 1) Communicate with the vendor2) Get Information for Test Planning3) Get Support for Testing4) Get Cooperation for Integration Test...
-
Write test cases for printing Single Linked List and Double Linked List ?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 31st, 2009
SINGLY-LINKED LIST
Preconditions:
Node A points to node C ; [NODE A]---->[NODE C]
Node B is an insertion node; Insert [NODE B]
Test cases:
TC1) You can insert [NODE B] after [NODE A]
TC2) You can not insert [NODE B] before [NODE A]
TC3) [NODE A] points to [NODE B] after insertion
TC4) [NODE B] points to [NODE C] after insertion
TC5) You can remove [NODE B]
TC6) [NODE A] points to [NODE C] after removalDOUBLY-LINKED LIST
Preconditions:
Nodes A and C point to one another; [NODE A]<---->[NODE C]
Node B is an insertion node; Insert [NODE B]
Test cases:
TC1) You can insert [NODE B] after [NODE A]
TC2) You can insert [NODE B] before [NODE A]
TC3) [NODE A] and [NODE B] point to one another after insertion
TC4) [NODE B] and [NODE C] point to one another after insertion
TC5) You can remove [NODE B]
TC6) [NODE A] and [NODE C] point to one another after removal
kurtz182
- Dec 31st, 2009
SINGLY-LINKED LISTPreconditions:Node A points to node C ; [NODE A]---->[NODE C]Node B is an insertion node; Insert [NODE B] Test cases:TC1) You can insert [NODE B] after [NODE A]TC2) You...
-
What are the Test Cases for T-Signal ?
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Mar 23rd, 2010
Test cases for T-Signal
1.check whether it has got 3 colour lights
2.check whether there must be atleast 2 colour light
3.check whether it has red colour and green colour
4.check whether at a time both colour light should not glown
5.check whether always it should have current
6.check whether each colour should be glown one after other
saravanan123
- Mar 23rd, 2010
Test cases for T-Signal1.check whether it has got 3 colour lights2.check whether there must be atleast 2 colour light3.check whether it has red colour and green colour4.check whether at a time both co...
-
Write test cases for Supermarket Software ?
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 12th, 2010
Test cases for super market :
1. To check whether all the product name is displaying or not2. To check whether all the product price is entered3. To check when the user enters the first letter of the product name itself it must display the products list starting with that letter.4. To check whether the product cannot entered without qty5.To check when the user gives the qty immediately it must multiply with cost price and must display the result6.To check whether at last it must display the total cost along with s.no7. To check each product must show its cost pricesaravanan123
- Jul 12th, 2010
Test cases for super market : 1. To check whether all the product name is displaying or not2. To check whether all the product price is entered3. To check when the user enters the first letter of...
-
Test cases for smart phone
Test cases for smart phone both positive and negative test scanarios
-
MS Word test cases
Please design tests for MS Word using different test case design techniques.
BNP1990
- Mar 17th, 2015
There Are Mainly or say Broadly two Design Techniques.. 1) Static . 2) Dynamic. For MS Word Application Static Test Cases Will be : 1)Testcase for GUI appearance and Handling 2)Testcase for Invok...
-
Save Button Test Case
Username :
Password:
First Name:
Last Name:
Resident address:
City:
Zip Code:
Save Cancel
In this case all the fields are mandatory..
Explain How to write a test case for save button
Test Cases Interview Questions
Read Best Answer
Ans