-
Write test cases for Supermarket Software ?
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 12th, 2010
Test cases for super market :
1. To check whether all the product name is displaying or not2. To check whether all the product price is entered3. To check when the user enters the first letter of the product name itself it must display the products list starting with that letter.4. To check whether the product cannot entered without qty5.To check when the user gives the qty immediately it must multiply with cost price and must display the result6.To check whether at last it must display the total cost along with s.no7. To check each product must show its cost pricesaravanan123
- Jul 12th, 2010
Test cases for super market : 1. To check whether all the product name is displaying or not2. To check whether all the product price is entered3. To check when the user enters the first letter of...
-
Write test cases for printing Single Linked List and Double Linked List ?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 31st, 2009
SINGLY-LINKED LIST
Preconditions:
Node A points to node C ; [NODE A]---->[NODE C]
Node B is an insertion node; Insert [NODE B]
Test cases:
TC1) You can insert [NODE B] after [NODE A]
TC2) You can not insert [NODE B] before [NODE A]
TC3) [NODE A] points to [NODE B] after insertion
TC4) [NODE B] points to [NODE C] after insertion
TC5) You can remove [NODE B]
TC6) [NODE A] points to [NODE C] after removalDOUBLY-LINKED LIST
Preconditions:
Nodes A and C point to one another; [NODE A]<---->[NODE C]
Node B is an insertion node; Insert [NODE B]
Test cases:
TC1) You can insert [NODE B] after [NODE A]
TC2) You can insert [NODE B] before [NODE A]
TC3) [NODE A] and [NODE B] point to one another after insertion
TC4) [NODE B] and [NODE C] point to one another after insertion
TC5) You can remove [NODE B]
TC6) [NODE A] and [NODE C] point to one another after removal
kurtz182
- Dec 31st, 2009
SINGLY-LINKED LISTPreconditions:Node A points to node C ; [NODE A]---->[NODE C]Node B is an insertion node; Insert [NODE B] Test cases:TC1) You can insert [NODE B] after [NODE A]TC2) You...
-
How will you write testcase for a quadratic equation ?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 13th, 2009
The quadratic equation is a polynomial of the second degree.
Its general form is
ax^2 + bx + c = 0
where x represents a variable and a, b, and c are constants.
I would study the functional requirements and technical specifications and create test cases based on my knowledge. The requirements might include the following features:1) Text which describes the quadratic equation and how to use the application.
2) A graphical representation of the quadratic function.
3) Text which decribes the first and second root of the equation.
4) Text which describes the equation's descriminant.
I will assume the requirements indicate that the application simply solves for x when all of the constants are input into the equation. I will also assume there is no
graphical representation supplied by the application. In this case, I would do the following:
1) Enter valid data in all fields and verify result.
2) Enter valid data in all but one field and invalid numeric data in remaining field and ensure validation.
3) Enter valid data in all but one field and no data in remaining field and ensure validation.
4) Enter a = 0 to verify it becomes linear.
5) Data set should include the following types:
a) Integers
- Positive
- Zero
- Negative
b) Decimal (applying greatest number of significant digits)
- Postive
- Negative
6) For each data type, I would
a) Use boundary value analysis to select input data for all data types.
b) Use equivalence class partitioning to minimize input data.
7) Enter alpha characters in all fields and verify validation.
8) Enter special characters in all fields and verify validation.
9) On each text box, I would try to enter numbers that extend beyond the range that the text box can accept.kurtz182
- Dec 13th, 2009
The quadratic equation is a polynomial of the second degree. Its general form is ...
Atulkale04
- Nov 25th, 2009
1. Valid test cases with all integer vaules2. Valid test cases with all imaginary values3. Valid Test cases with negatives values4. Valid test cases with infinity values.Same for invalid test cases.5....
-
How will you write a test case for Graph Calculation?
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Dec 13th, 2009
I would study the functional requirements and technical specifications and then I would create test cases based on my knowledge. In general, I would do the following:
1) Enter valid data in all fields and verify graph is properly displayed
2) Enter valid data in all but one field and invalid numeric data in remaining field and ensure validation
3) Enter valid data in all but one field and no data in remaining field and ensure validation
3) Use boundary value analysis to select input data
4) Use equivalence class partitioning to minimize input data
5) Enter alpha characters in all fields and verify validation
6) Enter special characters in all fields and verify validationsaravanan123
- Jul 12th, 2010
Test Case For Graph Calculation :1. To check whether we have got x values2. To check whether we have got Y Values3. To check whether we are marking in graph sheet only4. To check whether we are ...
kurtz182
- Dec 13th, 2009
I would study the functional requirements and technical specifications and then I would create test cases based on my knowledge. In general, I would do the following:1) Enter valid data in all f...
-
Notepad Testing
Question:Below is Notepad's File/Save dialog.a) If you were asked to test this dialog, how would you go about it?b) List various inputs you might place into the "File name" text field to test it.
nealgen
- Mar 26th, 2011
Test the functionality of the dialog boxes with both positive and negative test cases.like saving the file name with standard file names, negative testing with special characters,?blank spaces etc.Te...
-
How to write the test cases of Cut/Paste & Copy/Paste in Excel format.
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 14th, 2009
Testcase for Cut / Paste in Excel format
1.Check whether we are typed something in many fields
2.Check whether we can select the 2 rows and 2 columns in excel by clicking and dragging
3.Check whether we are dragging the field it displays the field to be covered with some highlighted colors
4.Check whether we can copy the highlighted field by pressing Ctrl+x
5.Check whether we cut the field it should be blinked
6.Check whether we can select any field in the excel
7.Check whether we can paste the cut fields by selecting Ctrl+v
8.Check whether the field we cut and pasted is correct
9.Verify whether the old field is empty.prabadi
- Mar 25th, 2011
First copy one cell, then cut other cell now paste the date in other cell the most recent data should be pastedSelect one cell cut the data and tries to paste in multiple cells. Select one cell copy the data and try to copy in to multiple cells
saravanan123
- Jul 14th, 2009
Testcase for Cut / Paste in Excel format 1.Check whether we are typed something in many fields 2.Check whether we can select the 2 rows and 2 columns in excel by clicking and dragging 3.Check whe...
-
Prepare 10 test cases for the above scenario based on minimum balance and withdraw amount input ?
When you try to withdraw money from an ATM machine, the minimum balance is 5000 prior to the withdraw.At any time user can withdraw an amount 500 only Assume remaining conditions are working.
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 16th, 2010
Test Cases :
1. To check whether the card is valid
2. To check whether account is valid
3.To check whether the card is working only with the correct pin number
4.To check whether the card is directed to work with appropriate a/c
5.To check whether the card has miniumum balance of above 5000
6.To check whether the card holder can get the amount when thereshalinimohan
- Jan 12th, 2011
Try to input an amount more than 5000 and verify that atm shows the required error message Try to input an amount equal to or less than 5000 and verify that user is able to withdraw the entered amoun...
saravanan123
- Jul 16th, 2010
Test Cases :1. To check whether the card is valid2. To check whether account is valid3.To check whether the card is working only with the correct pin number4.To check whether the card is directe...
-
Test Case Without Defect
You found a Defect, but it does not have a Test Case. what you will do at this situation?Remember: Existing test cases are already approved.
rafeeqraja
- Oct 14th, 2010
Log the defect in Defect management tool, and mention that the defect found in Adhoc testing.
-
Is migrated application testing needs to design new test cases or we can use the old TCs
VB 6.0 Application migrated in to .net, while testing do we need to design new TC or can I use old VB application Test cases.
rafeeqraja
- Oct 14th, 2010
We can use the old VB version test cases for testing .Net application.We should use the same, since the .Net application should exactly look like VB version application after the migration.FYI, I worked in this same migration testing.
-
Write Test cases for Traffic Signal
Read Best Answer
Editorial / Best Answer
sarvesh4u- Member Since Apr-2008 | May 12th, 2010
Test cases on the Traffc Signal
1- There should be three signal light (Red,Yellow,Green) also there should be provision to have a left and right arrow signal.
2- At a time only one stright and aadjacent left direction should have green signal on.
3- There should be duration of 5 second after completation of Green signal.
4- At the time of Green signal the Zebra cross signal should be red.
5- There should a provision when all the signal should be closed and only zebra crossing is allowed.
6- To make sure the visibility of the signal the height of the signal pole should be grater than 10 feet.
7- There should be provision to allow maual control if it is not a digitally controled.
8- Each and every signal should have time meter in the decreasing order.
9- There should be power backup provided to the signal.
10- The intensity of the signal light should be brighter and should not be dull.
mathan_vel
- Oct 1st, 2010
Test cases for T-Signal1. Ensure that T-signal is working fine on Power.2. Ensure that all 3 colors are glowing at frequent time.3. Ensure Red light should glow after the yellow light off.4. Ensure th...
sarvesh4u
- May 12th, 2010
Test cases on the Traffc Signal1- There should be three signal light (Red,Yellow,Green) also there should be provision to have a left and right arrow signal.2- At a time only one stright and aadjacent...
-
Status of Test Cases
What is the status of the test case in Test Director which are not executed?
saravanan123
- Mar 23rd, 2010
These test cases are not executed so it has no run and will be marked differently
-
1000-5000 Test Cases
If there are 1000-5000 testcases, a defect/bug/error occures in 5,6,7,89,178,4005th testcase. How will you rectify or solve this issue?
-
what is a test case? how to write the general test cases on PEN, PAPER, TABLE, FAN , ETC.
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 20th, 2010
Test case is nothing but writing the test description,test data,test actions ,actual and expected output these will be noted there based upon the requirements
Test cases for Table:
1.To check whether the table should be flat
2.To check whether the table has got good surface to keep the books over it to read and write
3.To check whether the table has enough strength
4.To check whether the table is very comfort for all the peoples to do their works
5.To check whether the table should not be more height
6.To check whether should be easily be taken or to move
7.To check whether the table should be easily folded and kept any where
Test Case for White Paper
1.Check it is unruled
2.Check whether nothing has been written on to it
3.Check whether it is pure white
4.Check whether it is not dared inside in any corner
5.Check it is ready to write
6.Check both sides are empty
7.Check it is not in wet condition
8.Check it is very neat
Test Case for Pen
1.Check whether the pen is writing in which colour
2.Check whether we can see the liquid from outside
3.Check whether the pen is ballpoint or ink
4.Check whether the pen is compact at the holding area
5.Check whether the pen can write in different conditon
6.Check whether the pen can write if it writes in ulta i.e if we sign or write or anything by keeping in the wall and writing
7.Check whether the pen is very attractive
8.Check whether the pen is very good in writing i.e nib area
Test cases for Fan:
1.To check whether the fan should have on off button
2.To check whether the fan should have at least 2 wings
3.To check whether the fan should give long life
4.To check whether the fan should give good speed of air
5.To check whether the fan`s speed can be controlled by using the buttons
6.To check whether the fan should run in all environmentsaravanan123
- Jul 20th, 2010
Test case is nothing but writing the test description,test data,test actions ,actual and expected output these will be noted there based upon the requirements Test cases for Table: 1.To check whether ...
raj29
- Jun 8th, 2008
To test the INK pen the following prerequisites should be there 1. cap 2. The pen should be divided into 2 part. The top to hold the nib and the bottom to hold the ink. 3. The parts cap, top of the...
-
Can any one give me BVA and Equivalence partitioning Testcases for >18 and
Read Best Answer
Editorial / Best Answer
kurtz182- Member Since Nov-2009 | Jan 7th, 2010
Equivalence partitioning and boundary value analysis to test a text box and accepts values greater than 18 and less than 21. The range of acceptable input is then 19 an 20. This isn't much of a range. In this example, there is no need to perform equivalence class partitioning because all numbers in the class will be used to conduct boundary value analysis.
The test values are:
18 ( min - 1 )
19 ( min )
20 ( max )
21 ( max + 1 ) -
Write test cases for forget password functionality.
By clicking forget password , request for password security questions and send new password.
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 20th, 2010
Test Cases For Forget Password :
1.To check whether when we select the forgot password link it is directing to forgot password link page.
2.To check whether in that page it must ask for alternative email id to send the link
3.To check whether the link has sent to the mail to which the user has provided
4.To check whether the link can be used once once
5.To check whether when the user using the link for more than one time it should be dissolved
6.To check whether the user opens the link it should ask the security question same at the time he registered
7.To check whether the answer given by the user at that time and he has given while at the time of registering must be the same
8.To check whether the user gives any wrong answer then it must ask for the user to wait and to get more details to get his password
9.To check whether the user gives the correct answer then the link should move to new password page
10.To check whether the user enters the new password and retype the password both should match untill new password should not be setted
11.To check whether once the password is setted then the account should ask the user to move to his account or exit
12.To check whether the user now logins with new password it is workingsaravanan123
- Jul 20th, 2010
Test Cases For Forget Password : 1.To check whether when we select the forgot password link it is directing to forgot password link page. 2.To check whether in that page it must ask for alternative em...
saravanan123
- Jul 19th, 2010
Test Cases for forget password : 1. Check whether when we click the forgot password link it must directs to forgot password link page2.Check whether it must ask the email to send the forgot password l...
-
What are the test cases for ceiling fan and would you perform the stress testing on it?
Read Best Answer
Editorial / Best Answer
mathan_vel- Member Since Dec-2007 | Aug 18th, 2009
1. Check the Ceiling Fan company (Logo, branded)
2. Check the Ceiling Fan Appearance and color.
3. Check that the Ceiling Fan is exactly mounted in Wall.
4. Check that the Blades are fitted in the Fan.
5. Check that the Fan is run on Switch on
6. Check that the Fan should stop run on Switch off.
7. Check that the air circulation up on the Regulator speed.
Stress Test Case:
1. Check the Ceiling fan running at Voltage problem.
2. Check the Ceilling fan life by run certain hour per day.
3. Check the Ceiling fan sound after several hour of runsaravanan123
- Jul 20th, 2010
Test cases for Ceiling fan :1.TO check whether it has got more than 2 wings2.To check whether the fan is connected to current3.To check whether the fan is rotating in single direction everytime4.To check whether the fan is working based on the speed
mathan_vel
- Aug 18th, 2009
1. Check the Ceiling Fan company (Logo, branded)2. Check the Ceiling Fan Appearance and color.3. Check that the Ceiling Fan is exactly mounted in Wall.4. Check that the Blades are fitted in the Fan.5....
-
What are the test cases developed for testing the performance of an application manually using Test Director and automated using WinRunner?
The application is for the HR group to get accessibility for details of employees salary, leaves, retirement benefits across the world
saravanan123
- Jul 20th, 2010
Hifirst of we cannot do the performance testing manually it will not give a good resultif you perform the performance testing there is no problem simply write the test case and execute as in the actual result mention if it is pass or fails based upon this you can write in test director
-
How do you create a test data for testing purpose
How do you create a test data and how many methods are available?
Read Best Answer
Editorial / Best Answer
mathan_vel- Member Since Dec-2007 | Aug 18th, 2009
Test Data are data which have been specifically identified for use in tests, typically of a computer program. Some data may be used in a confirmatory way, typically to verify that a given set of input to a given function produces some expected result. Other data may be used in order to challenge the ability of the program to respond to unusual, extreme, exceptional, or unexpected input. Test data may be produced in a focused or systematic way (as is typically the case in domain testing), or by using other, less-focused approaches (as is typically the case in high-volume randomized automated tests). Test data may be produced by the tester, or by a program or function that aids the tester. Test data may be recorded for re-use, or used once and then forgotten.
Domain testing is a family of test techniques that focus on the test data. This might include identifying common or critical inputs, representatives of a particular equivalence class model, values that might appear at the boundaries between one equivalence class and another, outrageous values that should be rejected by the program, combinations of inputs, or inputs that might drive the product towards a particular set of outputs.
saravanan123
- Jul 20th, 2010
We are creating a test data based upon what output we need to get based upon what input we have to give.this also depends upon the requirementsThis may be different to each project
mathan_vel
- Aug 18th, 2009
Test Data are data which have been specifically identified for use in tests, typically of a computer program. Some data may be used in a confirmatory way, typically to verify that a given set of input...
-
Write test case for Find and Replace funcationality?
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 20th, 2010
Test Cases:
1.To check whether find and replace options should be there
2.To check whether when we give some word to find and replace it must user whether to change for the whole or only particular word
3.To check whether shortcut key is working properly
4.To check whether all the words are replaced correctly5.To check whenever the user clicks find option or replace option immediately find and replace tab should be open6.To check whether when we select for more option it must display with more options7.To check whether if there are more than one page then we must click for goto and we give the page number it must work as per the dateils in that pagesaravanan123
- Jul 20th, 2010
Test Cases:1.To check whether find and replace options should be there2.To check whether when we give some word to find and replace it must user whether to change for the whole or ...
-
How to write requirements and test cases for sign up yahoo new user account .
Read Best Answer
Editorial / Best Answer
saravanan123- Member Since Jul-2009 | Jul 20th, 2010
1.Check whether firstname field accept only alphabets
2.Check whether last name field accept only alphabets
3.Check firstname last name cannot accept other than alphabets - negative
4.Check the login name field accept only alphabets numerics and special characters except dot.
5.Check whether the desired login name is created only when it displays specific name is available.
6.Check whether desired login name cannot be created with existing login name - negative
7.Check password accept more than 8 characters
8.Check password cannot accept less than 8 characters - negative
9.Check the password and re-enter password field be the matched
10.Check it display a message when password and re-enter password mismatches - negative 11.Check whether you can view the security question
12.Check whether answer field cannot be null.
13.Verify whether secondary mail field entered with valid id
14.Verify whether your location is present in the location field
15.Verify whether the captcha entered and available is correct.
16.Check every time you refresh or selecting i accept it display a new captcha
17.Check captcha be unique
18.Check captcha is case sensitive
19.Check when i accept is selected it moves to next page
20.Check when any required field is not entered or entered with the wrong values it display a message with red color fontsaravanan123
- Jul 20th, 2010
1.Check whether firstname field accept only alphabets 2.Check whether last name field accept only alphabets 3.Check firstname last name cannot accept other than alphabets - negative 4.Check the login ...
Test Cases Interview Questions
Read Best Answer
Ans