manjula

• Feb 11th, 2013

According to the production server, the software development company as to make the testing server. i.e hardware( make and configuration) should be similar, the software(OS, web server, application se...

Lakshya

• Jan 25th, 2013

Based on the user requirements like the hardware, OS, system conditions etc. set the environment so that it works similar to production environment

Answer Question  Select Best Answer

What do you do If a defect is affecting two separate test cases indirectly not directly. DO you assign the defect to both test cases and fail both or just assign it to one ??

manjula

• Feb 11th, 2013

Assign to first test case, say it as blocker defect and mention priority according to application

Amar

• Jan 22nd, 2013

If a defect is indirectly affecting two cases... in QC the defect can be linked to both the test cases and those cases may be marked "Blocked by defect"...

Answer Question  Select Best Answer

UNKNOWN

• Feb 13th, 2013

Test Bed is an mandatory environment setup for the application to be tested.

mfsi_chinmayb

 Profile Answers by mfsi_chinmayb Questions by mfsi_chinmayb

• Jan 18th, 2012

Hi
Test bed is the blocks which is used to make the test environment for the execution of the test.
It includes H/W, S/W,configuration of the product under test , operating system or any other additional things that may establish to environment for the test execution.

Answer Question  Select Best Answer

In a system designed to work out the tax to be paid:
An employee has £4000 of salary tax free. The next £1500 is taxed at 10%
The next £28000 is taxed at 22%
Any further amount is taxed at 40%
To the nearest whole pound, which of these is a valid Boundary Value Analysis test
case?


Please explain how to get the BVA?

archana

• Oct 6th, 2013

Boundary value is just below or Just above the extreme edges of input Data
So As Salary 4000 is tax free
next 1500 is taxed at 10% => 4000+1500=5500 taxed at 10%
next 28000 is taxed at 22% =>28000+5500= 33500 is taxed at 22%
any further taxed at 40%
so valid boundary value is 33501.

Answer Question  Select Best Answer

kalyaniunr

 Profile Answers by kalyaniunr Questions by kalyaniunr

• Mar 4th, 2014

Severity describes seriousness of an Issue It has three categories 1. Critical 2. Non Critical High (NCH) 3. Non Low (NCL) Critical: Critical severity will given by the test engineers whenever they ...

Answer Question  Select Best Answer

What do we do if we cannot execute all the test cases

sulochana

• Mar 24th, 2014

We can mark it as blocked and proceed with other testcases.

pavan

• Dec 10th, 2013

We mark it as not applicable and proceed with further testcases which are executing

Answer Question  Select Best Answer

What is difference between test case review and traceability matrix?

Rajat Shukla

• Jun 12th, 2014

Test case review : Its a process where a Test Lead reviews the test cases of his junior test engineer, so that test better test coverage and quality product can be achieved. This process is same as ...

Answer Question  Select Best Answer

what is actual meaning of defect tracking? Is there any difference between defect tracking and defect loging. I need practical answer.

swapnali

• Jul 3rd, 2014

Defect tracking covers all stages of a bug life cycle such as logging the defect in a defect database, assign that defect to respective developer, analyze the root cause of the defect, fixing the defe...

Praveena

• Jun 24th, 2014

Defect tracking - it is tracking of a issue or a defect found right from ?logging into the tool throughout the defect cycle when it is in various stages .New -Assigned -Open-Test- verified-Closed or ...

Answer Question  Select Best Answer

What is actual meaning of linking defect
?

STI

• Jul 6th, 2014

Linking of defect also means - If a user story / task has multiple defects, so all these bugs should be linked to the user story / task for tracking purposes. Why linking ? - To track, If the bug is ...

Viswa

• Jul 3rd, 2014

If there is duplicate defects like two defects created for same problem then this defects will be linked to get a better attention to the problem

Answer Question  Select Best Answer

During internal review which comments we get ? and what comments we give to others? I need practical answer. Suppose project is in banking and financial domain.

Manish

• Jul 22nd, 2014

Basically the internal reviews are useful to check the quality of test cases.where the reviewer might check 1.The simplicity of the test cases for a tester to execute 2. Whether the test cases are w...

Answer Question  Select Best Answer

Hi Guys

Recently I faced few interviews where they keep asking me this question, how do you justify Involvement of testing team in initial project planning stages OR Do you think this helps tester in any way while spending time on this .

Please provide best of your knowledge

Thanks in advance

raja

• Aug 8th, 2014

Testing team should also include from the initial phase of the project, for ex:, planning stage. This gives them a good idea about the project and it helps them in writing test cases.

Anish

• Sep 19th, 2013

Testing team should also include from the inital phase of the project, for ex:, planning stage. This gives them a good idea about the project and it helps them in writing test cases. At the planning s...

Answer Question  Select Best Answer

HI,

Please someone let me know what all the questions we can expect from the interviewer for the manual testers who has 3 yrs of exp.

Thanks,

Sumanth

Ashish

• Nov 21st, 2014

Yes

g l n babu

• Sep 10th, 2014

1. Entry and exit criteria 2. Severity and priority 3. Bug life cycle 4. Qc left side menus 5. Test cases template 6. Traceability matrix template 7. Regression test 8. Test cases execution 9. Test pl...

Answer Question  Select Best Answer

maheswari

• Dec 27th, 2014

Build is a developed software. initially some part of code is developed and then test it and then remaining some part of code is developed and the test it. It means that developers + testers is called build

Varsha

• Dec 26th, 2014

It is a executable set of code file for the s/w application handed over to the tester to test the developed functionality

Answer Question  Select Best Answer

The was found by the tester how can he knows the bug is valid or invalid?

sandeep12345

 Profile Answers by sandeep12345 Questions by sandeep12345

• Dec 30th, 2014

Any thing that is not matched with the given requirement or expected result,So from tester side it declared as BUG. And if this bug is really impact on coming release based on high priority than its...

Answer Question  Select Best Answer

Definition of test case?

sandeep12345

 Profile Answers by sandeep12345 Questions by sandeep12345

• Dec 30th, 2014

Test case is a document which contains the all requirement in informal way.

gopinathks9

 Profile Answers by gopinathks9 Questions by gopinathks9

• Nov 19th, 2014

Test case is document that take input and out put is the action where action is prepared by referring to Functional Speciication

Answer Question  Select Best Answer

Neha Jha

• Apr 7th, 2015

SQT is acronym of Software Quality Testing. Software Testing can be defined as: Testing is an activity that helps in finding out bugs / defects / errors in a software system under development, in order to provide a bug free and reliable system/solution to the customer.

s.lakshmipriya

• Feb 14th, 2007

Hai!SQT- software Quality Testing . for eg In Rational Robot we are using SQT language. it capturesobject properties and converts into its own objects and create the statements.regards

Answer Question  Select Best Answer

How do you perform exploratory testing? How do you know requirements covers positive and negative testing? What is the difference between for loops and while loops?

Sanju

• May 5th, 2015

If the requirements are not given by the end user then test that particular application or software by using the previous experience and knowledge but this can be done by only senior software test engineers.... It is also suitable when the requirements are frequently changing...

Rahul Chauhan

• May 5th, 2015

If you dont have document of your application in this case tester explore application in details to understand the flow of application that is called exploratory testing

Answer Question  Select Best Answer

sanju

• May 5th, 2015

1.white box testing is used to test only internal logic where as black box testing is used to testing test functionality of software. 2.white box testing is a process model where as black box testing...

Sadiya

• Jul 4th, 2014

Black box testing :Code is invisible,Testers are needed
White Box Testing : Code is visible,Only Developers are needed because they are the ones having good knowledge of programming as compared to the tester.

Answer Question  Select Best Answer

When do we prepare RTM (Requirement traceability matrix), is it before test case designing or after test case designing?

sanju

• May 5th, 2015

This is nothing but simply matching the requirements with the prepared test cases to ensure that whether the prepared test cases are enough to find the defect or not.... Due to this we can reduce the time allocated for test cases design

rahul chauhan

• May 5th, 2015

Requirements traceability matrix is a table that shows the many to many relationship between requirements and test cases. Each requirement is mapped to one or more test cases. Each test tests one or more requirements

Answer Question  Select Best Answer

sanju

• May 5th, 2015

Pilot testing is nothing but testing the software or application under real time conditions so that we can find more and more number of defects... By using this we can reduce the system failure condition

harikrishnaa

• Feb 24th, 2015

Pilot Testing is nothing but the end user will test the application, once it is fully developed. the application should satisfy the user needs and expectations.

Answer Question  Select Best Answer