shoban

• Aug 27th, 2013

In console under environment tab by clicking on virtual host we can configure virtual host.and also for every jvm we have virtual host there also we have to configure virtual host.
At application level also we can configure virtual host

Answer Question  Select Best Answer

Achyuth Ram

 Profile Answers by Achyuth Ram Questions by Achyuth Ram

• Apr 1st, 2011

The main purpose of virtual host is to provide multiple host aliases to a single host name i e default host r admin host.. The virtual host entries available in virtualhost.xml. It is the cell level f...

Answer Question  Select Best Answer

hari

• Oct 28th, 2011

Hi, From the console go to Applications --> Enterprise Applications --> Select the deployed application --> select virtual host under web module properties --> change the virtual host which should be...

Answer Question  Select Best Answer

What is work load manager in WebSphere? What is the default work load management policy?

Murtaza

• Jan 8th, 2012

Workload management (WLM) is a WebSphere facility that provides load balancing and affinity between application servers in a WebSphere clustered environment. WLM is an important facet of performance. ...

Answer Question  Select Best Answer

What is the difference between Vertical and Horizontal clustering? What is the use of Horizontal and Vertical clusters? Which performance better among these two?

Achyuth Ram

 Profile Answers by Achyuth Ram Questions by Achyuth Ram

• Apr 1st, 2011

Clustering is mainly to provide Fail-over capability.. i e if one server is goes down automatically the other server which is having the same configuration ie replica of failed server have to serve th...

Answer Question  Select Best Answer

Which XML file will get update when you change the fort name or add a fort number to a particular host?

krishna mul

 Profile Answers by krishna mul Questions by krishna mul

• Mar 28th, 2011

Serverindex.xml file contains all info about ports

Answer Question  Select Best Answer

What is a Cell, Node and a Profile?

HARI

• Oct 28th, 2011

Cell: A cell is a grouping of nodes into a single administrative domain. Based on the Websphere packages the servers available in each node will vary. Node: A node is nothing but logical grouping of ...

Answer Question  Select Best Answer

Read Best Answer

Editorial / Best Answer

suji  

 Profile Answers by suji Questions by suji

• Member Since Sep-2005 | Apr 12th, 2011

---

WebSphere Application Server default ports

•Web container port (HTTP_TRANSPORT) - 9080
•Web container secure port (HTTPS_TRANSPORT) -  9443
•Administrative console port (HTTP_TRANSPORT_ADMIN) -  9090
•Adminstrative console secure port (HTTPS_TRANSPORT_ADMIN) -  9043
•Name service or RMI connector port (BOOTSTRAP_ADDRESS) -  2809
•Simple Object Access Protocol (SOAP) port (SOAP_CONNECTOR_ADDRESS) -  8880
•Data replication service client port (DRS_CLIENT_ADDRESS) -  7873
•Java Message Service (JMS) queued port (JMSSERVER_QUEUED_ADDRESS) -  5558
•JMS security port (JMSSERVER_SECURITY_PORT) -  5557
•JMS direct port (JMSSERVER_DIRECT_ADDRESS) -  5559
•Secure Association Services (SAS) SSL server authentication port (SAS_SSL_SERVERAUTH_LISTENER_ADDRESS) -  9501
•Common Secure Interoperability Version 2 (CSIV2) server transport port (CSIV2_SSL_SERVERAUTH_LISTENER_ADDRESS) -  9503
•CSIV2 client transport port (CSIV2_SSL_MUTUALAUTH_LISTENER_ADDRESS) -  9502


WebSphere Deployment deployment manager default ports

•Administrative console port (HTTP_TRANSPORT_ADMIN) - 9090
•Adminstrative console secure port (HTTPS_TRANSPORT_ADMIN) - 9043
•Name service or RMI connector port (BOOTSTRAP_ADDRESS) - 9809
•Simple Object Access Protocol (SOAP) port (SOAP_CONNECTOR_ADDRESS) - 8879
•Data replication service client port (DRS_CLIENT_ADDRESS) - 7989
•Cell discover port (CELL_DISCOVERY_ADDRESS) - 7277
•Secure Association Services (SAS) SSL server authentication port (SAS_SSL_SERVERAUTH_LISTENER_ADDRESS) - 9401
•Common Secure Interoperability Version 2 (CSIV2) transport port (CSIV2_SSL_SERVERAUTH_LISTENER_ADDRESS) - 9402
•CSIV2 transport port (CSIV2_SSL_MUTUALAUTH_LISTENER_ADDRESS) - 9403
•Object Request Broker (ORB) listener port (ORB_LISTENER_ADDRESS) - 9100

WebSphere Application Server node agent default ports

•Name service or RMI connector port (BOOTSTRAP_ADDRESS) - 2809
•Simple Object Access Protocol (SOAP) port (SOAP_CONNECTOR_ADDRESS) - 8878
•Data replication service client port (DRS_CLIENT_ADDRESS) - 7888
•Secure Association Services (SAS) SSL server authentication port (SAS_SSL_SERVERAUTH_LISTENER_ADDRESS) - 9901
•Common Secure Interoperability Version 2 (CSIV2) transport port (CSIV2_SSL_SERVERAUTH_LISTENER_ADDRESS) - 9101
•CSIV2 transport port (CSIV2_SSL_MUTUALAUTH_LISTENER_ADDRESS) - 9201
•Object Request Broker (ORB) listener port (ORB_LISTENER_ADDRESS) - 9900
•Node discovery port (NODE_DISCOVERY_ADDRESS) - 7272
•Node multicast discovery port (NODE_MULTICAST_DISCOVERY_ADDRESS) - 5000


WebSphere Application Server JMS server default ports

•Java Message Service (JMS) queued port (JMSSERVER_QUEUED_ADDRESS) - 5558
•JMS security port (JMSSERVER_SECURITY_PORT) - 5557
•JMS direct port (JMSSERVER_DIRECT_ADDRESS) - 5559
•Simple Object Access Protocol (SOAP) port (SOAP_CONNECTOR_ADDRESS) - 8876

suji

 Profile Answers by suji Questions by suji

• Apr 12th, 2011

WebSphere Application Server default ports•Web container port (HTTP_TRANSPORT) - 9080•Web container secure port (HTTPS_TRANSPORT) -  9443•Administrative console port (HTTP_TRANSPOR...

Improve Answer

What happens if a profile is federated to DMGR at that time when it is stopped? What happens to the applications under the Servers in WebSphere 6.0

Achyuth Ram

 Profile Answers by Achyuth Ram Questions by Achyuth Ram

• Apr 3rd, 2011

There is no impact on running of applications on the servers when the DMGR is in running or  in stopped state. DMGR is just only for admin purpose only.. NO applications r running on DMGR

Answer Question  Select Best Answer

Achyuth Ram

 Profile Answers by Achyuth Ram Questions by Achyuth Ram

• Apr 1st, 2011

If node agent is not running , the corresponding the application will not  b  served thru that particular server... if the application is deployed on multiple servers, the remaining  servers will serve the application request..

Answer Question  Select Best Answer

What do you mean by Federate A NODE, in Web Sphere 6.0

Achyuth Ram

 Profile Answers by Achyuth Ram Questions by Achyuth Ram

• Apr 1st, 2011

We will Federate a appserver node to the dmgr node thru the command.. go to was product--> profies--> appserver home--> bin--> run the addNode.bat/sh dmgr hostname  dmgr soap con...

Answer Question  Select Best Answer

Achyuth Ram

 Profile Answers by Achyuth Ram Questions by Achyuth Ram

• Apr 3rd, 2011

During installation, we have to check the hardware and software prerequisites...WEBSPHERE product's installation will b successful only on UNIX flavours and windows xp servicepack2 , windows server......

Answer Question  Select Best Answer

What are the differences between load balancing and work load management?

kiran

• Oct 15th, 2012

Workload Management: When we assign clusters to the servers, the cluster maintain high performance when one of server failed to respond, the other server in cluster responds to the task.

Answer Question  Select Best Answer

Achyuth Ram

 Profile Answers by Achyuth Ram Questions by Achyuth Ram

• Apr 1st, 2011

1) The webserver plug-in examines the url, verifies the list of host name aliases from which it wil accept traffic based on the virtual host information, and chooses a server to handle the request.WEB...

Answer Question  Select Best Answer

Achyuth Ram

 Profile Answers by Achyuth Ram Questions by Achyuth Ram

• Apr 2nd, 2011

After logging into admin consoleEnvironments-->virtualhosts.. we r having default host admin host and proxy host..In admin hostwe r having the dmgr admin console ports i e 9060 to access admin console...

Answer Question  Select Best Answer

Achyuth Ram

 Profile Answers by Achyuth Ram Questions by Achyuth Ram

• Apr 3rd, 2011

yes.. There is a possibility to listen the multiple port numbers in Websphere... This is possible when we deployed the two applications on the single server.... We must add the ports of that particula...

Answer Question  Select Best Answer

How to install a fix pack in WebSphere 6.0? Explain all the steps

ks9bp

 Profile Answers by ks9bp Questions by ks9bp

• Feb 28th, 2012

To install fix packs We need the following 1. Update installer 2. Appropriate fiX packs for WAS,SDK,HTTP SERVER AND PLUG-IN. STEPS: 1. Stop the server before you apply the fix packs. 2. Use update ...

Answer Question  Select Best Answer

What is the port number for LDAP server with SSL and without SSL?

mohan

• Mar 23rd, 2012

SSL Port No.389 (without SSL), Port NO.636(with SSL)

Answer Question  Select Best Answer

How to provide security for application users in websphere

Tirupathi

• Aug 1st, 2014

Go to was admin console
Click on security tab

1.Check the "Enable administrative security" checkbox.

2.Make sure that "Enable application security" is also checked.

3.Optionally, enable "Java 2 security" on the same page.

4.Click Apply.

5.Click "Save directly to the master configuration".

Answer Question  Select Best Answer

Ragapriya Sukumaran

• Feb 20th, 2013

Type 2 Driver : Thick driver which requires a database client software running in client node
Type 4 Driver : Connects directly to server

Answer Question  Select Best Answer