Skill/Topic: Networking BasicsA) TrueB) FalseExplanation: NIC means Network Interface Card

nathsambu

 Profile Answers by nathsambu Questions by nathsambu

• Dec 21st, 2012

A) True Nerwork Interface Card

bhagare

 Profile Answers by bhagare Questions by bhagare

• Nov 21st, 2012

Network Interface Card

Answer Question  Select Best Answer

How do you configure a Cisco switch or router?

sm_feroz

 Profile Answers by sm_feroz Questions by sm_feroz

• Dec 4th, 2012

One can configure Cisco Switch and Router through Console Port.

Answer Question  Select Best Answer

bhagare

 Profile Answers by bhagare Questions by bhagare

• Nov 21st, 2012

Routing Protocol learn route for routed protocol and routed protocol carries user traffic such as Email file transfer.

harish

• Oct 6th, 2011

Routing protocol is used by routers to dynamically find all the networks in the internetwork & to ensure that all routers have the same routing.

Routed protocol is used to send user data through the established network.

Answer Question  Select Best Answer

bhagare

 Profile Answers by bhagare Questions by bhagare

• Nov 21st, 2012

Check via ping utility,check modem,or any mux device provided by service provider, which power is on/off,also checking via login by username & password into the router by connecting through hyper terminal,or directly login over network.

saurabh

• Nov 30th, 2011

1. First of all you can check the modem indication if in modem data light is not glowing it means link is down. 2. if you have a router login access you can also check the interface status where the ...

Answer Question  Select Best Answer

What is a wildcard mask, and how is it different from a netmask?

Santhosh

• Nov 20th, 2012

Wildcard mask is contrast to the subnet mask .
for ex . take an class c ip add . 192.168.10.1/24 for this subnet mask will be 255.255.255.0 !
wildcard mask is just opposite to subnet mask ,
wildcard mask for this ip address is 0.0.0.255.

sonet

 Profile Answers by sonet Questions by sonet

• Aug 4th, 2010

When you want to match certain bits of the IP address and ignore some bits, then you mask the IP address with 0 in bits you want to match and 1 where you want to ignore. The resulting mask is the wild...

Answer Question  Select Best Answer

Skill/Topic: Networking BasicsA) Open B) Closed C) None of the above

shaukat

• Sep 14th, 2012

Ans is a).
open look - good design

ankitsays9

 Profile Answers by ankitsays9 Questions by ankitsays9

• Jan 13th, 2006

B. Closed Loop

Answer Question  Select Best Answer

When our router get damage from branch end then how to take back up from our end?

what is stub area?
what is mean by area 0 ?

what is COST OF OSPF ?
what is VPN ?
what is VLAN
what is GRE ?
what is HSRP?
TELL ME DIFFRENCE BETWEEN ISDN & ATM ?
WHAT IS MEAN BY DTP?

ankushmahajan

 Profile Answers by ankushmahajan Questions by ankushmahajan

• Apr 5th, 2012

See this I hope it works for u

http://technet.microsoft.com/en-us/library/cc940476.aspx

Answer Question  Select Best Answer

mahesh

• Mar 26th, 2012

Static IP address- administratively assignment of IP address.
dynamic - assigning the IP address dynamically by using DHCP.

Answer Question  Select Best Answer

When intermediary devices only direct data flow and do not generate or change data content, how can they regenerate data signals ? If they do so, which is the intermediary device that can regenerate data signals ?

Bharat Singh

• Feb 23rd, 2012

Its Repeater, it can amplify the signals strength.

UMESH SINGH MEHTA

• Dec 8th, 2011

Basically when our signal is weak (on a network) then we should have a repeater device. This device used to regenerate the weak signal.

Answer Question  Select Best Answer

Lokesh M

 Profile Answers by Lokesh M Questions by Lokesh M

• Feb 12th, 2012

As far as I know this term is used for items that needs to be picked from various locations in a warehouse whenever a customer fills the shopping cart and & submits the list for purchase.

Answer Question  Select Best Answer

ljohns

• Jan 11th, 2012

Port is registered with IANA for the application = Official Port is not registered with IANA for the application = UnOfficial Telnet = port - 23(Official) FTP = port - 20(Data Tx), 21(Command), 22(S...

Shriniwas

• Oct 22nd, 2011

Telent : 23
FTP : 22/21
HTTP: 80
RPC : 135

Answer Question  Select Best Answer

how to take IIS server backup ?

Laxmikant C K

• Jan 6th, 2012

Hi,
Its too simply to IIS backup. Take the system state backup in that only IIS will be consider, if the server is IIS.

Answer Question  Select Best Answer

what is Ras server, how we configure in winnt?

Durgesh Pandey

• Jan 4th, 2012

RAS is stand for Remote Access Server.
It provide authentication to access our server by a remote location to any user.

pllaxman

 Profile Answers by pllaxman Questions by pllaxman

• Apr 11th, 2008

Remote Access Server is the ful form of RAS!Its possible to configure in WIN NT only with the third party RAS utility!Not inbuided into WIN NT Server OS!

Answer Question  Select Best Answer

UMESH SINGH MEHTA

• Dec 8th, 2011

For connecting the Switch to Modem we use standard cable in any version of UDP (cat 1.2.3.4.5.5e.6)

suneel

• Nov 17th, 2011

Straight cable.

If we use different devices we can use straight cable.
If we use same devices we can use cross cable

Answer Question  Select Best Answer

What is definition of E1, E3, T1, T3, BRI PRI How thay work and what is difference ?

saurabh

• Dec 1st, 2011

E-1 Similar to the North American T-1, E-1 is the European format for digital transmission. E-1 carries signals at 2.048 Mbps (32 channels at 64 Kbps), versus the T-1, which carries signals at 1.544 M...

nshahane

 Profile Answers by nshahane Questions by nshahane

• Jan 8th, 2009

A 2.048 Mbps point-to-point dedicated, digital circuit provided by the telephone companies in Europe. E1 is the European counterpart of the North American T1 line, which transmits at 1.544 Mbps, and E...

Answer Question  Select Best Answer

What is DFS stands for in the trem of Windows Server 2003

manju

• Sep 7th, 2011

Distributed file system

chirakuddin

 Profile Answers by chirakuddin Questions by chirakuddin

• Jun 9th, 2008

dfs is a distributed file system that enables administrators to make shares that are  stored on diff servers on the network that appear to  users that all shares are stored on a single share...

Answer Question  Select Best Answer

Aswins

• Sep 4th, 2011

DORA stands for Discover Offer Request Ack When there is request been sent from the client and there should be a response should be sent from the the server, So the process discovering the request b...

Answer Question  Select Best Answer

Skill/Topic: Networking BasicsA) Physical LayerB) Data Link LayerC) Network layerD) Application Layer

anshu

• Aug 29th, 2011

Physical layer, as it is the lowest layer in every model and is used mostly for any network to work properly.

Bibha Rawat

 Profile Answers by Bibha Rawat Questions by Bibha Rawat

• Aug 23rd, 2011

Physical Layer

Answer Question  Select Best Answer

Stan

• Aug 23rd, 2011

No because Infrastructure master performs its task by comparing its state against the state of a GC - and updates other DCs in the same domain based on the outcome. Effectively, the update would never took place since no differences would be detected.

Answer Question  Select Best Answer