Which of these drivers have their implementation in Java
a) .Net protocol
b) JDBC-ODBC driver
c) Native-API driver
d) Native protocol

Ankita

• Jul 1st, 2017

JDBC ODBC driver

Anuj Garg

• Mar 23rd, 2017

JDBC-ODBC driver

Answer Question  Select Best Answer

Can we replace diode connected BJT with diode in current mirror circuit? Will that work in the same way or not?

bichi

• Nov 10th, 2016

No it will not work as like

Nihal

• Sep 14th, 2016

I could not understand question, but I think the question is related to BJT has p-n-p or n-p-n band if you take two diodes, each it has n(-ve) side and p(+ve) side. so now, by using two diodes you wi...

Answer Question  Select Best Answer

Nadim

• Mar 29th, 2013

I think you should do a project based on micro controller...if you have a knowledge of MATLAB then it will be an added advantage for you, you can make a project on that. The micro controller based projects are simple and easy to understand and even you can understand their programs easily..

purushottam

• Jan 2nd, 2007

I  am in BE(electronics engineer).I want to make a project,please suggest me a project that i do.I hope you will do a needfull help

Answer Question  Select Best Answer

raja

• Dec 21st, 2006

I would like to know about the difference between the PLC and DCs.  I also like to know about the DCS in detail.

adraj

 Profile Answers by adraj Questions by adraj

• Dec 6th, 2006

Yeah visit nptel.iitm.ac.in

Answer Question  Select Best Answer

What is the difference between LED's and PN junction diode?Why cut in voltage is high for LED's?

Kishan Vaghani

• Feb 20th, 2015

In LED all energy converted into a light when in PN junction all energy converted into a heat

jhabua

 Profile Answers by jhabua Questions by jhabua

• Jun 27th, 2011

LEDs are made of direct band gap elements whereas as general PN junctions are made of indirect band gap elements.In LEDs while a carrier is making transition from conduction to valence band the releas...

Answer Question  Select Best Answer

How can we increase the gain and directivity of an antenna?

abid saleem

• Mar 18th, 2013

Antenna gain relates the intensity of an antenna in a given direction to the intensity that would be produced by a hypothetical ideal antenna that radiates equally in all directions (isotropically) an...

uzipereg

 Profile Answers by uzipereg Questions by uzipereg

• Jul 30th, 2011

Geometry, direction for example.

Answer Question  Select Best Answer

In a ripple counter using edge-triggered JK flip-flop. the pulse input is applied to the 1. clock input of oll flip-flops 2. clock input of one flip-flop 3. J and K input of one flip-flop 4. J and K input of all flip-flops

RZara

 Profile Answers by RZara Questions by RZara

• Nov 24th, 2009

The first flip flop is clocked and the rest are clocked from their previous flip flop's output.

linzmath

 Profile Answers by linzmath Questions by linzmath

• Oct 30th, 2008

2. clock input of one flip-flop (first)

Answer Question  Select Best Answer

1. vector processor 2. array processor 3. von neumann 4. both array processor and von neumann

shahina

• Aug 14th, 2017

Von neumann

FALGUNI

• Jul 15th, 2016

Array processor

Answer Question  Select Best Answer

gopichand

• Jun 21st, 2013

Hi guys,
here the information about 1 start and 1stop bit is given to confuse the candidate ,
in synchronous transmission there is no need of start and stop bits so 2400/(7+1) is the ans..........

samatha

• Jun 15th, 2013

Start an d stop bits are not needed so it is 2400/8=300

Answer Question  Select Best Answer

harshil102

 Profile Answers by harshil102 Questions by harshil102

• Sep 27th, 2010

Flooding most often occurs when a large enough number of packets (the droplets in a stream of data) are flowing through the network that regular data cannot be sent in a normal speed and fashion. Ge...

shashi.srm

 Profile Answers by shashi.srm Questions by shashi.srm

• Jun 28th, 2010

It is a technique used for sending packets of data to selected group of person and is not sent to all users as in case of flooding.

Answer Question  Select Best Answer

chakr

 Profile Answers by chakr Questions by chakr

• Nov 7th, 2009

In 8085 there is an internal circuit wich devides the frequency feeded by external device by two.. 8085 operating frequency is 3MHZ we have to feed 6MHZ to it

nitin

• Feb 23rd, 2007

In order to execute machine cycle Mp need twice frequeny that of operating .

Answer Question  Select Best Answer

Dhrubotaa Chatterjee

• Mar 4th, 2018

In electronics, a flip-flop or latch is a circuit that has two stable states and can be used to store state information

Nikhil kumar

• Jan 18th, 2016

Digital electronic are like a modern type electronic if we use morden electronics in our life flip flop is an storage devices which is called toggeld switch also.

Answer Question  Select Best Answer

What is the difference between latch and flipflop?what is the main difference between 8085 and 8086 processors?

ubabmar

 Profile Answers by ubabmar Questions by ubabmar

• Jun 24th, 2009

In Latch & Filpflop the only difference is control signal. i.e Clock Signal The 8085 is a 8bit processor & the 8086 is a 16bit processor. In 8085 we can't do Multiplication or division by using singl...

kawal_547

 Profile Answers by kawal_547 Questions by kawal_547

• Dec 14th, 2008

Flip Flop stores a binary Bit on a given clock pulse , Latch stores that binary bit unless next pulse is applied, i.e it stores and helds that binary bit unless it is not triggered again 

Answer Question  Select Best Answer

What is the difference between Power Amplifier and Voltage Amplifier?

Nishant

• Sep 2nd, 2014

Voltage amplifiers have a high voltage gain, while power amplifiers have a high power gain. In most voltage amplifiers, current gain is very low, while power amplifiers have a significant cur...

ana_m

 Profile Answers by ana_m Questions by ana_m

• Jan 24th, 2009

Power amplifiers basically amplify both current and voltage (p=v*i).Voltage amplifiers only amplify the voltage.

Answer Question  Select Best Answer

What is the meaning of Tristate Signal in Electronics?

ravi132

 Profile Answers by ravi132 Questions by ravi132

• Jul 20th, 2009

Tristate device is 3 terminal device & it has three states. They are logic 0, logic 1 & high impedance state or tristate. This?device?can be used as switch. For ON logic 0 or logic 1 (depending on active low or active high appl) OFF as high independence state.

ubabmar

 Profile Answers by ubabmar Questions by ubabmar

• Jun 24th, 2009

In Digital two states known as '0' & '1'. Apart from these two we have another state that known as "Tristate".i.e. In digital '0' for 0V to max of 0.4 to 0.8 V. &...

Answer Question  Select Best Answer

In a MOSFET, What does the pinch off voltage refers to?

Sagar21p

 Profile Answers by Sagar21p Questions by Sagar21p

• Oct 7th, 2010

Pinch off voltage is the excess voltage Vds applied which limits the current flowing into drain.. at that point the current saturates...and the o/p current remains constant.

kumar praveen bodu

 Profile Answers by kumar praveen bodu Questions by kumar praveen bodu

• Mar 23rd, 2010

Pinch-off voltage refers to the maximum gate current applied to MOSFET to increase the depletion layer between source and drain.

Answer Question  Select Best Answer

What is the Value of binary number with n digit, all of which are unity?a) 2 to the power nb) 2 to the power (n-1)c) (n square) - 1d) (2 to the power n) - 1

abiramy

 Profile Answers by abiramy Questions by abiramy

• Aug 18th, 2010

(2 to the power n)-1

rajanicd

 Profile Answers by rajanicd Questions by rajanicd

• Jul 7th, 2010

The answer is D For eg. consider 1111 which has 4 digits2^4=16(2^4)-1=15

Answer Question  Select Best Answer

We take the area of collecter wide comparision to base and emitter. Why?

himanshu.3375

 Profile Answers by himanshu.3375 Questions by himanshu.3375

• Oct 22nd, 2010

Its area is kept more to collect the maximum number of electrons transmitted.

Ranveer Upadhyay

 Profile Answers by Ranveer Upadhyay Questions by Ranveer Upadhyay

• Oct 3rd, 2010

 if u think over that then we use collecter in reverse bias n emitter in forward bias.in reverse bias minority carriers r responsible for conduction. if the area of collector is not more than emi...

Answer Question  Select Best Answer

What is difference between a multiplexer and encoder? also What is the between demultiplexer and decoder?

manoj

• Apr 2nd, 2015

Multiplexer is converted many signal to one signal by multipexing and encoder is encrypt single for sequrity.

demux and decoder is same work but opposite

hagos haftu

• Jan 14th, 2015

Yes it is very useful but as comment the description of the combination circuits should be supported by their practical circuits ,,,,the rest it is good

Answer Question  Select Best Answer

How can we convert a JK flip flop into SR flip flop and vice versa, a SR flip flop into D or T flip flop and vice versa?

bhalika

 Profile Answers by bhalika Questions by bhalika

• Jan 20th, 2011

J & K pins are connected together and act as T, so its T flip flop

anandsri

 Profile Answers by anandsri Questions by anandsri

• Nov 28th, 2010

Remove feedback q and q not pins

Answer Question  Select Best Answer