(for 1.0MT steel), Nails & Lubricant (for 1.0 Sqm shuttering)

In RCC what are the required quantities for:

1. Binding wire required for 1.000 MT of TMT Reinforcement bars.
2. Nails for 1.00 Sqm Shuttering.
3. Lubricant/Black oil/ Deisel/ grease for 1.00 Sqm Shuttering.

Vikram Sahran

• Apr 13th, 2016

6 to 8 kg/tan and
2=5kg,
3=11.63,
4=16.66

S.Noorul Ameen

• Sep 4th, 2014

For 1: 10 kgs binding wire per 1MT of steel.
For 2: 1 to 1.5 kg per quintal

ie 10 to 15 kgs per tonne depending upon dia of steel.

Answer Question  Select Best Answer

JCB Hiring rate includes maintenance of JCB....yes or no

lingeshwaran

• Jan 13th, 2015

YES

harshwardhan

• Jan 9th, 2015

Depends upon the rental agreement you had with the JCB agency, you have to mention for it in an agreement.

Answer Question  Select Best Answer

How can we convert Cum to Mt. in calculation of BC, DBM or WMM

Subhankar

• Jun 6th, 2024

DBM

Anil Ray

• Jun 22nd, 2017

Wmm weight per cum

Answer Question  Select Best Answer

Read Best Answer

Editorial / Best Answer

rzaman68  

 Profile Answers by rzaman68 Questions by rzaman68

• Member Since Jan-2009 | Jan 25th, 2009

---

To improve the bearing capacity of soil, one of the following methods can be used.

1. Vibro Floatation Technique

2. Repalce the existing soil with road base materials and compact in layers to attain the required bearing capacity of soil.

3. Replace the existing soil with cement mix soil and compact in layers with water to attain the required bearing capacity.

4. Vibro Replacement Technique

Shiva Kant

• Nov 1st, 2017

We can increase the capacity of soil by decreasing the area of the footing.

rzaman68

 Profile Answers by rzaman68 Questions by rzaman68

• Jan 25th, 2009

To improve the bearing capacity of soil, one of the following methods can be used.1. Vibro Floatation Technique2. Repalce the existing soil with road base materials and compact in layers to attai...

Improve Answer

KUMARESAN

• Sep 29th, 2011

Ultimate resisting capacity of the soil per m2 area,load from the any structure

Ramzi Nunu

• Sep 22nd, 2011

bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the maximum average contact pressure between the foundation and the soil which shou...

Answer Question  Select Best Answer

What is the bearing capacity of soil?

dipankar_shome

 Profile Answers by dipankar_shome Questions by dipankar_shome

• May 29th, 2012

It is defined as the maximum load carrying capacity of soil per unit area without any shearing failure of the soil.

Dinesh Mandlik

• May 12th, 2012

Bearing capacity of Soil is the maximum load carrying capacity of soil per unit area without any shear to soil.

Answer Question  Select Best Answer

what is the quantity of 20mm concrete, sand used for 1 CUM R.C.C

Deepak

• Aug 19th, 2013

By finding X, we get volume of each one.........

sakthi

• Jul 19th, 2013

1:1.5:3 ratio concrete material calculate

Answer Question  Select Best Answer

Jawad hussain

• Oct 3rd, 2017

Simple, the easiest work on concrete without bleeding and segregation and place easy is called workability of concrete. There are three methods are use to determine workability of concrete 1 slump cone test 2 compaction factor test 3 vee bee test.

Abdurahman shahidi

• Jun 29th, 2017

The ease with which a concrete can be mixed, placed and finished. Wet concretes are workable but weak. Workability can be measured by the slump test, the compacting factor test, and by the V.-B. Consistometer test.

Answer Question  Select Best Answer

sathwika

• Jan 29th, 2019

It is essential that the cement concrete does not undergo large changing in volume after setting this is ensured by limiting the quantity of free lime, magnesia in whole cement.

B. NARENDRA

• Oct 23rd, 2018

Specific gravity of cement to conduct the material was sink or float

Answer Question  Select Best Answer

What is the VDF?

P.Natarajan

• Nov 16th, 2017

VDF- Vacuum Dewatered Flooring

Amit Kumar

• Mar 11th, 2017

VDF means Vacuum Dewatered Flooring

Answer Question  Select Best Answer

We get excavation level readings more accurate with total station, say yes or no ( and give reason)

syed

• Dec 17th, 2014

Yes

Rajesh

• Dec 15th, 2014

No, Because u may not cross check for accuracy.?

Answer Question  Select Best Answer

Why do we provide extra reinfocement bars at the end portion of beam?and how we can calculate the amount of reinfocement?

Shaik Salman

• Feb 24th, 2015

The end zone is shear zone thats y we r providing a extra bar at end of the beams.

uma shankar sahu

• Feb 10th, 2015

Because end portion of beam shearforce is And in middle is zero

Answer Question  Select Best Answer

Is there any grade for PPC? If not, why?

sathwika

• Jan 29th, 2019

33,43,53

sonu kumar

• Feb 8th, 2018

OPC-33
OPC-43
OPC-53
OPC-63
*OPC -53 is the best of the concreting work.

Answer Question  Select Best Answer

Explain about steel detailing and where it would be useful with any tips

vishal

• Feb 16th, 2016

Steel detailing is the process of control and design of spacing between reinforcement of structure. It reduces the probability of wrong ratio of steel in any structure.

RAGAVI

• Feb 6th, 2016

I am studying final year civil engineering. I want to make my career in rebar detailing. Can any one suggest me on what area I should concentrate if am appearing for an interview & recruitment process for a fresher in rebar detailing company.

Answer Question  Select Best Answer

Explain what are Column, SLA, Beams and Cover?

ch penchalaiah

• Mar 2nd, 2015

Rcc desings

Nirav Bhatt

• Nov 24th, 2014

Referring to IS 456 Clause 26.4 for Column - 40 mm (Dia of bar >12mm) and 25 mm (Dia of bar

Answer Question  Select Best Answer

what is the method of calculation for require Cement qty. in 1 Cum brick work with CSM 1:6.

Md. Nesar Uddin, PowerPac, Bangladesh.

• Jan 12th, 2014

We know, for 1 cum brickwork done to need 35% dry cement mortar.
So, Cement Mortar for 1 cum=1 ?0.35=0.35 cum
Given, Ratio is 1:6 = 1+6 = 7
1. Cement= (0.35?1)/7=0.05 cum.
2. Sand= (0.35?6)/7=0.3 cum

Md. Nesar Uddin

 Profile Answers by Md. Nesar Uddin Questions by Md. Nesar Uddin

• Jan 12th, 2014

We know, for 1 cum brickwork done to need 35% dry cement mortar.
So, Cement Mortar for 1 cum=1 ?0.35=0.35 cum
Given, Ratio is 1:6 = 1+6 = 7
1. Cement= (0.35?1)/7=0.05 cum.
2. Sand= (0.35?6)/7=0.3 cum

Answer Question  Select Best Answer

What is least count of theodolite?

Sukhram

• Jan 4th, 2020

Least count of theodolighte 20 sec

sathwika

• Jan 29th, 2019

Least count of theodolite 20 sec

Answer Question  Select Best Answer

Explain its properties..

Venukumar

• Nov 17th, 2017

Thermo-Mechanical Treated

suji

 Profile Answers by suji Questions by suji

• Mar 7th, 2012

TMT means Thermomechanical Treatment of steel. Its a process of simultaneous application of heat and a deformation process of metal, in order to change its shape and refine the microstructure. Hot...

Answer Question  Select Best Answer

Borvah Kessele

• Nov 20th, 2014

2010

sk imran

• Oct 4th, 2014

2012 is good to known easily and also commands are also updated as compare to advanced versions soo i suggest AUTO CAD 2012 is best.2012 is good to known easily and also commands are also updated as compare to advanced versions soo i suggest AUTO CAD 2012 is best.

Answer Question  Select Best Answer

Which is more efficient - rectangular beam or a circular beam? Give example?

Naresh Sonwane

• Mar 27th, 2016

It is all about the section modulus of the shape of member while calculating the section modulus for equal area of rectangular section and circular section, rectangular has more section modulus hence rectangular is efficient under bending stresses

PUSHP RAJ

• Oct 4th, 2014

According to material of beam if we use conc then rectangular beam but on using steel beam tubular section are better than rectangular. as construction

Answer Question  Select Best Answer