-
Describe the detailed involvement you have had in the preparation and planning of UAT
munagaraja
- Apr 19th, 2011
I assume that you are asking this question from QA Testers point of view.As a QA Tester, you have to involve in following areas to help complete UAT.1. Provide QA Team's Test Strategy to UAT team so t...
-
What is a job of a tester in SDLC?
Read Best Answer
Editorial / Best Answer
ramesh7584- Member Since Mar-2007 | Jul 29th, 2007
Overall Business Requirements Phase:
No Tester is required but User Acceptence Test Cases (UAT) need to be defines by the Customer.
Requirements Analysis Phase:
Tester can go through the requirements document and needs to write System testing test cases
High-Level Designing Phase:
Tester Needs to write Integratiosn test Cases
Low-Level Test Cases:
Component testing Test Cases to be documented
Coding:
Unti Testing ( Done by Developers only)
All the test cases activities starts at the end of that phase
Once the coding has been done.. testing starts in phase wise.ramesh7584
- Jul 29th, 2007
Overall Business Requirements Phase: No Tester is required but User Acceptence Test Cases (UAT) need to be defines by the ...
-
Will OpenSTA 1.4.3 support IE 6.?Which Performance Automation tool supports the higher version of IE.?which is not support?
ch.bhaskar.mca
- Mar 31st, 2011
Hi,OpenSTA is a distributed software testing architecture. The main feature of OpenSTA is web (HTTP and HTTPS) performance and load/stress testing.?It allows you to record different usage patterns ...
-
XML Testing
While testing XML file, what are the areas we do consider?
ch.bhaskar.mca
- Mar 31st, 2011
XML Testing Hi Apabbati, XML testing can be under 2 scenarios. 1) Validating the Structure of XML. 2) Comparing Nodes and Properties. 3) Comparing ...
goksn
- Jul 23rd, 2009
XML testing is more of white box. Only developers and white box testers have more command in testing xml files.But as a black box tester, we can findIF AUT is purely web, then we can check the compati...
-
Regression Testing Test Cases
On what basis will you select a set of test cases among hundreds for regression testing?
sonalee
- Mar 19th, 2011
Regression testing is to check the dependencies.So we can go to Requirement Tracebility Matrix & check the dependencies & on basis of that we can select the test cases.Moreover if time problem is there then test the test cases which have high priority.Plz do correct me if i m wrong
gsrmohan
- Feb 11th, 2011
We do regression testing to ensure that any bug fix or change doesnot have any ill effect on other modules.We are not going to execute all the test cases .But only those test cases that are related to...
-
Test Approach
What is your approach towards Testing?
ausrahul
- Mar 10th, 2011
Test approach is the implementation of the test strategy of specific project. the test approach is defined? and refined in the test plans and test designs. It typically includes the decisions made ba...
-
Boundary Values
An input field takes the year of birth between 1900 and 2004. What are the boundary values for testing this field?
mathan_vel
- Mar 9th, 2011
x=1900y=2004Boundary value is x-1=1899(invalid), x=1900(valid), x+1=1091(valid)Boundary value is y-1=2003(valid), y=2004(valid), y+1=2005(invalid)
mathan_vel
- Dec 31st, 2010
X=1900y=2004Boundary value is x-1=1899(invalid), x=1900(valid), x+1=1091(valid)Boundary value is x-1=2003(invalid), x=2004(valid), x+1=2005(invalid)
-
What is the difference between BUILD and RELEASE?
swathisree1987
- Mar 9th, 2011
Build is a Executable file which is handed over to the tester to test the functionlity of the developed part of the project.
Release is that which we finally hand it over to the client of the project after the develpoment and testing phases are completed.
ashishks
- Sep 10th, 2009
Build: Is the content of latest executable files of the software.Version: Is the content of updated files of the software.
-
Requirement tracebillity matrix
When we have to prepare requirement tracebility matrix?
penchala
- Mar 3rd, 2011
It is a intial level of testing process before going to test the application.It is the comparision document between F.R.S and Test Cases. Say if a project contains 10 features The treacebility ma...
-
Manual Compatability Testing
How to do compatability testing manually?
gsrmohan
- Feb 11th, 2011
In compatibility testing we ensure that the system is working fine under client specific environments. (Ex:- Client may ask his application should work in IE ,Mozilla, Safari, Opera Etc. ) We have to check that the system is working fine under different client specific environments.
-
Regression Testing
Why regression testing is performed after completion of end-end testing?
gsrmohan
- Feb 11th, 2011
Regression testing is done to ensure that any bug fix or code change may not have any ill effect on existing functionality.
arunkumarraju
- Jan 13th, 2011
The Re-Execution of selected tests on modified build to estimate completeness and correctness of modification is called Regression Testing.
-
Manual Testing Test Status
How to save the status of a test in manual testing?
gsrmohan
- Feb 11th, 2011
we will use test case template documents for this purpose.(Excel Sheet)In test case document we have to set the status of test cases after executing them like PASS ,FAIL ,NOT EXECUTED.The test case do...
-
Static testing after Dynamic testing.
Is it useful to do static testing after dynamic testing?
gsrmohan
- Feb 4th, 2011
Static testing is the process in which we verify the code, algorithm or documents.So it comes early in the SDLC (Ex: Test Plan review, Test Case Review etc,...)Where as Dynamic Testing is the process ...
vaibhavst
- Dec 13th, 2010
We should not do Static testing after Dynamic testing because Static testing comes early in STLC. and the whole idea behind testing is to reduce the defects at later stage which will not be solved by doing the things other way round.
-
What is Test Automation Approach?
viplav15
- Jan 19th, 2011
Simply put, what is meant by "Automated Testing" is automating the manual testing process currently in use. This requires that a formalized "manual testing process" currently exists in your company...
sankarraparthi
- May 31st, 2007
Different steps in automation testing approach can be defined as follows,1. Check the stability of the product2. Decide the interface to be tested3. Decide the scope of automation4. Identify individual test cases5. Fine tune the test cases6. Decide the right tool7. Decide the right mode
-
Walk Through
What is Walk Through, Review and Inspection in Testing and Who does these? Explain with example
arunkumarraju
- Jan 13th, 2011
Reviews: - A document level testing technique during this review, the responsible People are estimating the completeness & correctness of correspondingDocument.There are 3 waysi. Walk - throughii....
praveen_crzy
- Oct 29th, 2009
There are 3 Reviews taken place in order to approve the test cases written by the tester.1. Peer / Internal Review: Once the requirements are freezed, tester will write the test cases based on the FRD...
-
System Testing
What is system Testing? Who will create test cases for System Testing?
mailme.qualityfirst
- Dec 16th, 2010
System Testing is also called as end to end teting. Here the testing is done from start of the requirement to end. The importance of system testing is it verifies the end to end scenario and also the interfaces between the various modules
gsrmohan
- Dec 16th, 2010
The term System Testing speaks for itself. The "System" means that the subject of testing in the whole software solution .System Functional Testing is verification of the system against beha...
-
What is CMM level ?
Mavin
- Dec 15th, 2010
Based on my practical knowledge, organizational experience & knowledge gained through various sources of information, I will try to explain the 5 different CMM levels. As we are moving up in ...
guptvibha
- Jul 5th, 2009
CMM - Capability Maturity Model.It is process improvement approach. It can be used to guide process improvement across a project, a division, or an entire organization. It is maturity level for an...
-
I have a good knowledge on Testing,SQL server and Oracle databases.I am interested in Database testing.Can any one suggest me about how to launch myself into database testing.Thanks in Advance.
vaibhavst
- Dec 13th, 2010
To get into database testing you need to have the following basic requirement.1) Good understanding of complex queries2) Good understanding of stored procedures3) you should be efficiently able to use...
-
Website and Web Application
What is the difference between website and web application with reference to testing?
vaibhavst
- Dec 13th, 2010
What is the difference between website and web application with reference to testing?A web application is a website. web applications are subset of the word website. Definition of website is "A c...
-
Connect TOAD for Oracle 9i to QC
How to connect TOAD for Oracle 9i to Quality Centre?
vaibhavst
- Dec 13th, 2010
Excuse me if i am wrong. But as per my information we have no such option called "Connect TOAD for Oracle 9i to QC" in QC 10. We can connect to a Oracle 9i database using ADODB connection st...
Testing Interview Questions
Sub Category
Questions
Answers
Last Updated
Read Best Answer
Ans