Work Station crashes suddenly, How will you retrieve data?

Arun

• Jun 5th, 2012

We cannot retrieve the data from crash. but we can analyze what made server or workstation crash provided the crash dumps should be enabled. we can send it oracle for review.Data can be retrieved if there is backup enabled

vivekmathur

• Mar 13th, 2012

We can check the crash dump file. in /var/crash/hostname.xx0 ,or by dumpadm command we can find the path of crash file.

Answer Question  Select Best Answer

# ifconfig qe0:1 plumb# ifconfig qe0:1 10.10.1.150 up

ramanan

• May 24th, 2012

Ifconfig qe0:1 10.10.1.150 netmask 255.255.255.0 broadcast + up

srujan

• Dec 25th, 2011

USE CMD ifconfig qe0 addiff 10.10.1.150 up

Answer Question  Select Best Answer

How do you determining current booted disk in sun Solaris OS?

Lokesh

• Apr 25th, 2012

Prtconf -vp|grep -i boot ----gives last booted device

who -b -------last booted time

eeprom boot-device----------gives boot device

Abdul Shameer

 Profile Answers by Abdul Shameer Questions by Abdul Shameer

• Jun 24th, 2011

Df -h

Answer Question  Select Best Answer

CONSOLE=

Navneet

• Mar 28th, 2012

#vi /etc/default/login
# CONSOLE=/dev/console (Only root can login)

CONSOLE=/dev/console (normal user can login and after that can do switch as root but directly root cant login from remote)

encore

 Profile Answers by encore Questions by encore

• Mar 10th, 2010

Open, #vi /etc/default/profilego to 18th line, and comment the line CONSOLE=/dev/console to: #CONSOLE=/dev/consoleNow you can do telnet to remote pc as Root admin

Answer Question  Select Best Answer

Navneet

• Mar 28th, 2012

Two way can do
1)#kbd -a (for enable|disable)
or
2)#Vi /etc/default/kbd
KEYBOARD_ABORT=disable

anupam_vats

 Profile Answers by anupam_vats Questions by anupam_vats

• Mar 25th, 2010

For temprary basis type command disable stop+Akbd -a disableFor permanent basis vi/etc/default/kb and edit keyboard_abort diableRegardsAnupam CMS Info Gurgaon

Answer Question  Select Best Answer

How to change hostname on Solaris 10?

sridh

• Mar 27th, 2012

If we want change the host name permanently we have to change the entry in 3 files. Before changing 3 files first type the following command #hostname ----- here new host name is now we assign the nam...

vivekmathur

• Mar 13th, 2012

For temp: #hostname
for permanent change :
entry in the following files:
cat /etc/nodename
cat /etc/hosts
cat /etc/inet/ipnodes
cat /etc/hostname.xxx0

Answer Question  Select Best Answer

Explain How will you create extra Volumes?

vivekmathur

• Mar 13th, 2012

we can create the extra volume by the soft partition methods like: metainit d701 -p d70 metainit d702 -p d70 after that format newfs /dev/md/rdsk/d701 newfs /dev/md/rdsk/c702 make entry in vfstab ...

Vasu Rao

 Profile Answers by Vasu Rao Questions by Vasu Rao

• Feb 2nd, 2012

metadb -a creates state database replicas (you can also create then using The Solaris Volume Manager software GUI) The syntax of the command is: metadb -a [-f] [-c n] [-l nnnn] disk_slice metainit ...

Answer Question  Select Best Answer

satish51392111

 Profile Answers by satish51392111 Questions by satish51392111

• Mar 12th, 2012

There are 3 types of device names: 1. Logical device names: Present in /dev and are soft links to physical device names in /devices. Used in command line (i.e., while...

Vasu Rao

 Profile Answers by Vasu Rao Questions by Vasu Rao

• Feb 2nd, 2012

C#t#d#s#
1.c# Controller number
2.t# Target number -- actually disk number
3.d# Disk number -- always d0 for SCSI disks.
4.s# Slice number

Answer Question  Select Best Answer

What is the maximum slice than can be created in a single disk?

vivekmathur

• Mar 10th, 2012

In sparc system we can create only 7 slice bt in x86 is same as sparc 8th and 9th slice for boot loader files

satya.sridevi

 Profile Answers by satya.sridevi Questions by satya.sridevi

• Nov 1st, 2010

 Whole disk size can be the maximum size of a slice as usually slice 2 will be the whole disk partition in Solaris 10.

Answer Question  Select Best Answer

prasan kumar

• Feb 20th, 2012

Logical device path i.e., /dev/dsk/c#t#d#s#

Answer Question  Select Best Answer

Nabhan

• Jan 15th, 2012

1. default route should be mentioned in the /etc/defaultrouter with an ip address from the other subnet mentioned in the box from you are pinging. 2. routing should be enabled between the subnets on ...

Suresh Krishnan

• Feb 27th, 2007

default router should be added.create /etc/defaultrouter with gateway ipand give the following commandroute add default 

Answer Question  Select Best Answer

Nabhan

• Jan 15th, 2012

It is dependent upon the model, we can have the information from oracle portal

rsivareddy

• Jun 6th, 2007

We can connect upto 106 CPU in Sun machine.

Answer Question  Select Best Answer

How to check Solaris Volume Manager Version in 9 & 10? Which are the packages that are installed in the SVM?

Nabhan

• Jan 14th, 2012

These are some packages install for SVM SUNWmdr - Solaris Volume Manager driver SUNWmdu - Solaris Volume Manager commands SUNWmdx - Solaris Volume Manager drivers (64-bit) SUNWlvma - S...

somesh_p

 Profile Answers by somesh_p Questions by somesh_p

• Oct 13th, 2009

You don't have to install any additional packages. It comes in-build with Solaris 10 operating system

Answer Question  Select Best Answer

Copy from /etc/opasswd, /etc/oshadow file or by the utility pwconv

srujan

• Dec 25th, 2011

First of all we have to create the file that is /etc/opasswd file that is duplicate of /etc/passwd file, whenever the /etc/passwd file is corrupted we can use the /etc/opasswd file and copy the contents of /etc/opasswd to /etc/passwd and we can use it.

satya.sridevi

 Profile Answers by satya.sridevi Questions by satya.sridevi

• Nov 1st, 2010

Run the command "boot -f failsafe" which takes you to the single user mode and correct the /etc/passwd file bring up the system.

Answer Question  Select Best Answer

ashutosh

• Dec 14th, 2011

Code
 
telnet <ip> <port>
 

Answer Question  Select Best Answer

M PRASAD

• Sep 20th, 2011

Ipcs -m

smallsre

 Profile Answers by smallsre Questions by smallsre

• Jun 26th, 2010

For Solaris, "ipcs -m".  Follow man pages for additional viewing options.

Answer Question  Select Best Answer

Rajasekhar

• Sep 17th, 2011

Ndd -get, to show the network cards, in Solaris 8, second question with "prtdiag" command.

masenu

• Jul 18th, 2011

Chaithu is correct ..i think first identify no.of network interface cards available using #dladm show-dev command and display nic e1000g0 is primary and e1000g1 secondary.........

if it wrong give the correct answer

Answer Question  Select Best Answer

Vishal Madamwar

• Sep 12th, 2011

When bootblock get corrupted, you will get message as: Boot load failed. The file just loaded does not appear to be executable. This is for SPARC machine ok> boot cdrom -s # newfs /dev/rdsk/c0t0d0s...

sasikumar12

 Profile Answers by sasikumar12 Questions by sasikumar12

• Dec 12th, 2008

Ok boot cdrom - s#mount /dev/rdsk/c0t0d0s0 /a#cd /usr/platform/uname-m/lib/fs/ufs#installboot bootblk /a /dev/rdsk/c0t0d0d0#cd /#umount /a#init5

Answer Question  Select Best Answer

When we gave df -k command, from where is the information fetched? Explain the name and path of the file Where the information is stored?

Vishal Madamwar

• Sep 4th, 2011

The df-k command to display the amount of disk space used for file system in Kbytes format. It fetches the information from /etc/mnttab.

This command does not work on a partition without a file system, but does work on a partition with an unmounted file system.

manwerjalil

 Profile Answers by manwerjalil Questions by manwerjalil

• Jan 15th, 2010

There are many ways to fetch the list of currently-mounted-devices: read the files ... But after we inspected it on Linux & Solaris the information fetch from (/etc/mnttab).

Answer Question  Select Best Answer

Sulog

Vishal Madamwar

• Aug 30th, 2011

SULOG determines the location of the file used to log all su attempts.

SULOG=/var/adm/sulog.

anishgreysharp

 Profile Answers by anishgreysharp Questions by anishgreysharp

• May 17th, 2011

We can find all switched log information in /var/adm/sulog

Answer Question  Select Best Answer