You need to connect a Token Ring segment to an Ethernet segment. Would you use a router, a brouter , or a bridge ?

mmigdal

 Profile Answers by mmigdal Questions by mmigdal

• Mar 18th, 2010

Router is needed with two interfaces: one Token Ring, another Ethernet one.

Answer Question  Select Best Answer

How to configure two DHCP Servers using 2 swithces with 1 DSL. Keep in mind we cannot use any other additional equipment.

naveenbhatiya2007

 Profile Answers by naveenbhatiya2007 Questions by naveenbhatiya2007

• Jan 27th, 2011

You configure what is known as Network Address Translation (NAT) on the router. This then translates the IP address of the server, which is likely to be a 10.x.x.x or 192.168.x.x address, to be the IP...

Answer Question  Select Best Answer

Sandhya.Kishan

 Profile Answers by Sandhya.Kishan Questions by Sandhya.Kishan

• Apr 19th, 2012

The internet layer packs data into data packets known as IP datagrams, which contain source and destination address information that is used to forward the datagrams between hosts and across networks....

Answer Question  Select Best Answer

All the users in a LAN have trouble communicating with the mail server. As a Network Engineer, what are the troubleshooting steps to be followed?

Sagar

• Nov 3rd, 2014

Restart the mail services

Answer Question  Select Best Answer

Samir Dhara

• Dec 2nd, 2014

Subnetmask is screen of number used for routing traffic within a subnet
Host is non changeable IP of all class

Answer Question  Select Best Answer

how to check printer registry ? and whats the need to check printer registry waht its use?

Pavan

• May 27th, 2015

Every software which is installed on the computer registers itself in registry. Start->run>regedit-> HKEY_CURRENT_USERPrinters

Answer Question  Select Best Answer

Redirector is software that intercepts file or prints I/O requests and translates them into network requests. This comes under presentation layer.

prassu

• Sep 27th, 2005

Its excellent

Answer Question  Select Best Answer

NETBIOS is a programming interface that allows I/O requests to be sent to and received from a remote computer and it hides the networking hardware from applications.NETBEUI is NetBIOS extended user interface. A transport protocol designed by microsoft and IBM for the use on small subnets.

sunil

• Dec 16th, 2005

NETBIOS it describes the basic information of the n/wNETBEUI : Network Bios Extended User Interfacemainly used by Microsoft

Answer Question  Select Best Answer

The data unit created at the application layer is called a message, at the transport layer the data unit created is called either a segment or an user datagram, at the network layer the data unit created is called the datagram, at the data link layer the datagram is encapsulated in to a frame and finally transmitted as signals along the transmission media.

piratheepan.r

• Sep 19th, 2005

data unit in application layer is called data or message.data unit in transport layer is called segment.data unit in network layer is called packet.data unit in data link  layer is called frame.data unit in physical   layer is called bits.

Answer Question  Select Best Answer

The Trivial File Transfer Protocol (TFTP) allows a local host to obtain files from a remote host but does not provide reliability or security. It uses the fundamental packet delivery services offered by UDP.The File Transfer Protocol (FTP) is the standard mechanism provided by TCP / IP for copying a file from one host to another. It uses the services offered by TCP and so is reliable and secure. It...

Clive

• May 16th, 2006

What is the difference between these layers and the switches

Answer Question  Select Best Answer

It provides a framework for discussing network operations and design.

senthil kumaran(shri win info system)

• Aug 16th, 2006

It is very important model for networking:

The main aim to design the OSI model is that actully they want to set a standerd for the communication and want to standarized the network equipement so that they would not be any Brand consuines

Answer Question  Select Best Answer

It is using a router to answer ARP requests. This will be done when the originating host believes that a destination is local, when in fact is lies beyond router.

panditume

 Profile Answers by panditume Questions by panditume

• Jul 6th, 2011

Proxy ARP is the technique in which one host, usually a router, answers ARP requests intended for another machine. By "faking" its identity, the router accepts responsibility for routing...

Answer Question  Select Best Answer

How is it used

ssv

• Aug 4th, 2007

The TCP connection table contains information about the entity's existing TCP connections.

Answer Question  Select Best Answer

The HELLO protocol uses time instead of distance to determine optimal routing. It is an alternative to the Routing Information Protocol.

meghana skumar

• Jul 19th, 2006

It is used to discover neighbours,when a hello packet is recieved it gives its IP address which is matianed in routing tables..

Answer Question  Select Best Answer

I want answer in typical technical language with reference to computer.

panditume

 Profile Answers by panditume Questions by panditume

• Jul 7th, 2011

SD RAM:SDRAM is Single Data Rate meaning that SDRAM can accept one command and transfer one word of data per clock cycle. Typical speeds of SDRAM are 100 and 133 MHz.DDR SDRAM:DDR SDRAM transfers d...

Answer Question  Select Best Answer

Read Best Answer

Editorial / Best Answer

Answered by: Kalyan Raghavan

• Jan 28th, 2006

---

DHCP is only available on newer IOS-based switches. For example, Catalyst 3550 and 3750 offer DHCP.

Let us take Cisco 2611 router running IOS12.2

To begin, connect the router's Ethernet port to a switch, and connect the switch to a laptop, which will serve as the DHCP client.

To configure Cisco IOS DHCP, follow these steps, which include sample commands:

1. Configure an IP address on the router's Ethernet port, and bring up the interface. (On an existing router, you would have already done this.)

Router(config)# interface ethernet0/0
Router(config-if)#ip address 1.1.1.1 255.0.0.0
Router(config-if)# no shutdown

2. Create a DHCP IP address pool for the IP addresses you want to use.

Router (config)# ip dhcp pool mypool

3. Specify the network and subnet for the addresses you want to use from the pool.

Router(dhcp-config)# network 1.1.1.0 /8  

4. Specify the DNS domain name for the clients.

Router(dhcp-config)#domain-name mydomain.com

5. Specify the primary and secondary DNS servers.

Router(dhcp-config)#dns-server 1.1.1.10 1.1.1.11

6. Specify the default router (i.e., default gateway).

Router(dhcp-config)#default-router 1.1.1.1

7. Specify the lease duration for the addresses you're using from the pool.

Router(dhcp-config)#lease 7

8. Exit Pool Configuration Mode.

Router(dhcp-config)#exit

This takes you back to the global configuration prompt. Next, exclude any addresses in the pool range that you don't want to hand out.

For example, let's say that you've decided that all IP addresses up to .100 will be for static IP devices such as servers and printers. All IP addresses above .100 will be available in the pool for DHCP clients.

Next, enter the ipconfig /renew command on the laptop to receive an IP address. After you have the IP address, enter the ipconfig /all command.

Kalyan Raghavan

• Jan 28th, 2006

DHCP is only available on newer IOS-based switches. For example, Catalyst 3550 and 3750 offer DHCP. Let us take Cisco 2611 router running IOS12.2To begin, connect the router's Ethernet port to a switc...

Improve Answer

santosh_wt

 Profile Answers by santosh_wt Questions by santosh_wt

• May 18th, 2006

 Maximum Transmission Unit is  the largest physical packet size, measured in bytes, that a network can transmit. Any messages larger than the MTU are divided into smaller packets b...

Answer Question  Select Best Answer

Hari

• Oct 12th, 2006

Hiwe can retreive a crashed outlook file with a SCANPST.EXE file.u can find this scanpst executable file in all windows(98,2000,xp) platforms.so u search this file in ur c:programfilescommon folder.so...

Answer Question  Select Best Answer

Mahe Korukonda

• Aug 23rd, 2006

I know only the advantages of Layered design. We can treat each layer as a problem area. Say for example, data link layer, people can concentrate only on the device driver only, they dont need to worr...

Answer Question  Select Best Answer

vikrant sharma

• Jul 27th, 2006

Emergency Repair Disk, an ERD is a diskette that creates backups of important system files and settings and is used to help troubleshootand fix issues for Microsoft WINNT and WIN 2...

Answer Question  Select Best Answer