md tauqir-ul-hoda

• Jul 24th, 2011

ROUTED PROTOCOL---? Routed protocol is protocol which words on layer 3 to carries public data.
POURTING PROTOCOL---?Routing protocol is also a protocol which works on layer 3 devices to deciding a route through which send a packet.

J Biswal

 Profile Answers by J Biswal Questions by J Biswal

• Nov 4th, 2008

IP is a routed protocol. A routed protocol is a packet that carries data. It is different from a routing protocol, in that the latter updates routers to let them know which path a packet should traverse.

Answer Question  Select Best Answer

panditume

 Profile Answers by panditume Questions by panditume

• Jul 5th, 2011

ADSL is a type of DSL Broadband communications technology used for connecting to the Internet. It is faster than conventional modem.

boopathy02

 Profile Answers by boopathy02 Questions by boopathy02

• Jan 16th, 2008

ADSL stands for asynchronous digital subscriber line........

Answer Question  Select Best Answer

bhagare

 Profile Answers by bhagare Questions by bhagare

• Nov 21st, 2012

Check via ping utility,check modem,or any mux device provided by service provider, which power is on/off,also checking via login by username & password into the router by connecting through hyper terminal,or directly login over network.

saurabh

• Nov 30th, 2011

1. First of all you can check the modem indication if in modem data light is not glowing it means link is down. 2. if you have a router login access you can also check the interface status where the ...

Answer Question  Select Best Answer

Karthik

• Jul 19th, 2007

Basically the L3 switches are used in the LAN networks, where you need the fast switching and there is no need of any WAN technologies(Frame-relay, atm etc ) or the features like Mcast, tunneling.But ...

Hemant Gambhir

• Jun 21st, 2007

Hi,Well As far as my kniwledge is concerned. I am sorry to say but this question is wrong and the answer is mentioned below for the same.Layer 3 switch does everything to a packet that a traditional r...

Answer Question  Select Best Answer

Tejas1

• Mar 24th, 2007

More elaborate answer will be :-VLan is a remote LAN which connects to a central LAN for resource accessing altho not bign a part of LAN physically

Dhanya

• Mar 12th, 2007

VLAN means Virtual LANIt gives flexibility in networking.Like a normal LAN may be one which is connected to one switch or enclosed in a room or floor of a building.  But in vlan we...

Answer Question  Select Best Answer

Dhaval

• Jun 15th, 2015

Router is used to connect two different Networks

rahul

• Mar 16th, 2014

Router,perform routing,routing is a best availble path in the network.
Subnet is group of large network,wich will be diveded into small network,for userfriendly........

Answer Question  Select Best Answer

Skill/Topic: Networking BasicsA) TrueB) False

vmshenoy

 Profile Answers by vmshenoy Questions by vmshenoy

• Jan 11th, 2007

true not only info but also resouces like printers, scanners etc

vivek sinde

• May 11th, 2006

True.

Answer Question  Select Best Answer

Skill/Topic: Networking BasicsA) TrueB) False

lrp

• Feb 12th, 2007

False

wlochaty

 Profile Answers by wlochaty Questions by wlochaty

• Jan 25th, 2006

False. Imo UTP-5 looks like telephone cable only for a woman :).

Answer Question  Select Best Answer

Skill/Topic: Networking BasicsA) Physical LayerB) Data Link LayerC) Network layerD) Application Layer

wolniqJr

 Profile Answers by wolniqJr Questions by wolniqJr

• May 20th, 2011

  Magnetic Medis is an example of Physical Layer.

k_srinadh

 Profile Answers by k_srinadh Questions by k_srinadh

• Mar 16th, 2006

ya its Physical

Answer Question  Select Best Answer

Skill/Topic: Networking BasicsA) error-correcting codesB) error deducting codesC) error free networkingD) None of the above

rahul

• Feb 4th, 2014

Error correction code

maya

• Mar 26th, 2013

Error correcting codes

Answer Question  Select Best Answer

Skill/Topic: Networking BasicsA) TrueB) FalseExplanation: IP addresses can be determined statically (assigned to a computer by a system administrator) or dynamically (assigned by another device on the network on demand).

sivanesh.a

 Profile Answers by sivanesh.a Questions by sivanesh.a

• Feb 24th, 2007

Yes u can assign in both ways.if dynamic use DHCP

cfernald

 Profile Answers by cfernald Questions by cfernald

• Mar 21st, 2006

An IP address cannot be both static and dynamic.  The question should read "An IP address can be assigned either statically or dynamically".

Answer Question  Select Best Answer

Skill/Topic: Networking BasicsA) Frequency Division MultiplexingB) Frequency Distirbution Multiplexing C) Frequency Division MethodsD) Frequency Distribution Methods

Hanna

• Jun 3rd, 2015

Frequency division multiplexing

wolniqJr

 Profile Answers by wolniqJr Questions by wolniqJr

• May 20th, 2011

FDM in Networking stands for :?? Frequency Distribution Multiplexing.?? And not ??? Frequency Division Multiplexing,? this is in Computer Networks, Signals and Systems in electronics and communications.

Answer Question  Select Best Answer

Skill/Topic: Networking BasicsA) TrueB) False

priyanka

• Feb 4th, 2021

True

arya jungade

 Profile Answers by arya jungade Questions by arya jungade

• May 25th, 2007

True in session routing route remains for entire user session

Answer Question  Select Best Answer

Skill/Topic: Networking BasicsA) Dynamic Host Configuration protocol

sivanesh.a

 Profile Answers by sivanesh.a Questions by sivanesh.a

• Feb 24th, 2007

dynamic host control protocol, is used to assigna unique IP address to every machine in a network

C.A.MURALI MOHAN

• Feb 24th, 2006

DYNAMIC HOST CONFIGURATION PROTOCOL.IF WE DONT WANT TO GIVE STATIC IP ADDRESS WE CAN USE THIS DHCP METHOD.IN THIS METHOD, THE SERVER AUTOMATICALLY ALLOT IP ADDRESS FOR CLIENTS SEQUENTIALLY.

Answer Question  Select Best Answer

Skill/Topic: Networking BasicsA) Border Gateway Protocol

sivanesh.a

 Profile Answers by sivanesh.a Questions by sivanesh.a

• Feb 24th, 2007

Border gateway protocol

C.A.MURALI MOHAN

• Feb 24th, 2006

BGP have associated properties that are used to determine the best route to a destination when multiple paths exist to a particular destination.

Answer Question  Select Best Answer

Krupa

• May 18th, 2006

Rs.4.50/-

priya.papa

 Profile Answers by priya.papa Questions by priya.papa

• Apr 28th, 2006

Rs.2.50

Answer Question  Select Best Answer

mvadivell

• Feb 12th, 2007

SSL or Secure Sockets Layer is a security protocol created by Netscape that has become an international standard on the Internet for exchanging sensitive information between a website and the computer...

vmshenoy

 Profile Answers by vmshenoy Questions by vmshenoy

• Jan 10th, 2007

SSL stand for Secure socket layercreated by netscapeapplication layer protocolmanages security of messag transmission on n/w

Answer Question  Select Best Answer

sriram.koyelada

 Profile Answers by sriram.koyelada Questions by sriram.koyelada

• Feb 9th, 2007

Hi,Specially Three types of Routers1) Access layer router(Which is used for Small offices and corporates)2) Distibution layer router(Which is used for ISP's like sify,tata)3) Core layer router(Which is used for Backbone ISP's like vsnl)GOT IT!!!!!!!!!!

vmshenoy

 Profile Answers by vmshenoy Questions by vmshenoy

• Jan 9th, 2007

There are two type of routers1)static routers2)dynamic routers - distance vector -link state

Answer Question  Select Best Answer

8 colours

senthil kuamar

• Dec 9th, 2014

DIFFERENT DEVICE CONNECTING USING STRAIGHT CABLE CODING ONE END : OW O GW B BW G BrW Br ANOTHER END : OW O GW B BW ...

rahul

• Mar 18th, 2014

Straight through cabling, for to connect two different,device,the color code will be, orange white,orange,green white blue,blue, white green,brown white, brown for both end, Cross through, Green white...

Answer Question  Select Best Answer

Ring (token ring), Star (ethernet), Extended Star(Ethernet with extended switches), Hub and Spoke (Ethernet,

simon.zhang

 Profile Answers by simon.zhang Questions by simon.zhang

• Apr 2nd, 2008

In most ISP, nomally use double star topology, used to provide load balance and redundency

pllaxman

 Profile Answers by pllaxman Questions by pllaxman

• Feb 12th, 2008

Hi,Network topology is the way in what way the networking had been done!Topologies are of different typesBus topology, ring, star, mesh...Here many are out of focus!Presently most of the Network Admin...

Answer Question  Select Best Answer