How to calculate RCC member unit weight by using IS Code 875 part I.
while standard weight RCC 25KN/m3

What is the max. % of steel (tendons) provided in prestressed beams? we know min. is 0.2 as per IS1343

A beam carrying two point loads; each point load comprises a beam-end reaction from two of the beams in part (a). The beam span is 9 meters and the point loads are applied at the third points; i.e. 4m from each end with a 4m gap between them. No allowance has been made for self-weight.

this has to be in accordance with EC2, for moment capacity, shear capacity and deflection, carrying out...

Please suggest me SBC(Soil Bearing Capacity) value for raft of 19/40 mm and 40mm and 76mm...the land contain granite rocks...

How to prepare budget and billing verses time with Work progress

Is it possible to use granular backfilling around Manhole up to the level of ground water table? Manhole invert level is -9.0 m and depth to invert level is 15 meters. if possible, what are the requirements?

Questions:1.What is the phrase Land Surveying means?2.Why do we need Land Surveying?3.What are the relationships between Land Surveying and its Allied Disciplines and Stake Holders?The Allied Disciplines and Stake Holders are:-Land Use Planning-Town Planning-Geograhic Information System-Land Information System-Low Altitude Remote Sensing or Aerial Photography and Photo Grammetry-High Altitude or Satelite...

What is the ratio between bentonite powder and construction water so that density will come 1.2?

How to identify the requirement for dewatering for a project of construction of culverts near the sea shore. The bottom slab will be under water after completion of the project. The initial plan is to build an earthdam to isolate the area, followed by dewatering.

How to execute a steel structural high rise/industrial building? What is the
Procedure of execution?What are the precautions to be taken during the preparation of foundation for steel structural building?
How to design a roof truss for a two storied building/industrial?
What are the Materials used for steel structural works?Outline the main precautions to be taken for steel structural...

What is Universal Beam & Universal Column? What is the significant of these two?

How to check the bulkage of sand?

Compression Test results records the following for columns of a 2 storey building.a)20Mpa, 18Mpa, 16Mpa, 21Mpa & 21.5Mpa Describe the effect of the above test & lists what action to be taken. Standard Specification 20Mpa for the particular column. b) Action to be undertake with low reading test.

What are the basic steps in the design of cyclone resistant structures?

How earth quake occurs? What is plate tectonic theory?

The total load proposed on the platform is 40kN/m2. and the plan is 17ft width, 30ft length. What should be the thickness of the beam, slab? The platform is for a compactor.

What is the Difference between G.I and M.S steel and what is mixing component?

What is the procedure/method to do the oscillation test? Is there any limitation to do this test?

What is the procedure of design mix?